Office Star Products Accents MEGAN MEGSA User manual

PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
LIMITED WARRANTY
Office Star Products warrants to the original purchaser that this product will be free from defects in material and workmanship as
described below. Office Star Products will repair or replace, at its option, without charge to the original purchaser only, defective
products or parts for one (1) year from the date of purchase. Replacement parts can only be supplied if parts are available. Items
out of production may be unavailable. This warranty shall be effective for the applicable time period beginning from the date of
purchase as shown on your original sales receipt. This warranty is your sole remedy for product defects and excludes defects
due to or arising in connection with product abuse or misuse, use modification of, or attachments to the product, and products or
parts not used, maintained, or installed in accordance with the company’s installation, maintenance and/or applicable guidelines.
There are no other warranties, express or implied, other than those specifically described, including without limitation any implied
warranty of merchantability or of fitness for a particular purpose. Office Star Products will not be responsible for incidental or
consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state. Our quality standards are among the highest in the industry. Sometimes, no matter how
hard we try, there are times when parts are damaged or missing. Our Parts Department will do everything possible to promptly
remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262,
Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
MEGSA
MEGAN OFFICE CHAIR
OPERATING INSTRUCTIONS
WARNING
1. Do not use this product unless all screws and bolts are
securely tightened.
2. Check that all screws and bolts are tight every three months or
as needed.
3. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only
2
1
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift
lever (1). To lower seat height sit on chair and
lift lever (1).
NOTE: It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature. Turn knob (2) clockwise to increase tension and
counter-clockwise to decrease or ease the tension. To lock return
chair to the upright position and push lever (1) in. To unlock pull
lever (1) out.
NOTE: Be careful not to loosen the back tilt adjustment
knob completely.

PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
PROOF
© Office Star Products June 2017
IMPORTANT NOTE:
1. Use hand tools only for assembly as power tools may cause damage
2. Carefully remove any staples used for packaging.
PA R T QTY
1. Chair Body ...................1
2. Base .......................1
3. Pneumatic Cylinder ............1
MEGSA
MEGAN OFFICE CHAIR
ASSEMBLY INSTRUCTIONS
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert Pneumatic Cylinder (3) into Base (1). Place the Chair Body (1) on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE CHAIR BODY (1) IS STABLE BEFORE USING CHAIR.
1
3
2