Office Star Products SPACE 5565 User manual

1
WARNING
1. Usethisproductonlyonepersonatatime.
2. Donotusethischairunlessallscrewsare
 securelytightened.
3. Checkthatallboltsscrewsandknobsaretightevery
threemonthsorasneeded.
5. Disposeofpackingmaterialproperly.Donotuse
plasticcoverasheadcovering.Itmaycause
suffocation.
6. Donotusechairasastepladder.
7. Usethischairforitsintendedpurposeonly.
8. Usemilddetergentonlyforcleaning.
LIMITED WARRANTY
SPACE®chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons
weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism,
rusting, acts of nature or any other event beyond the control of Office Star Products.The warranty does not cover cosmetic damage that may
result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of
this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
Tomakeawarrantyclaim,contactPartsDepartmentviae-mailparts@officestar.net,byFax1-909-930-5629,ortollfreeparts
number1-800-950-7262,MondaythroughFriday8:00a.m.-5:00p.m.PacicTime.Providemodelnumberanddescriptionofthe
problemandobtainconrmationnumber.Atit’soptionOfceStarProductswill:
(a)Supplycompatiblecomponentsofcurrentmanufacture.
(b)Repairthecustomer’scomponent.
Itisthecustomer’sresponsibilitytoprepayfreightonanycomponentsreturnedtothefactory.Returnfreightoncomponents
coveredbywarrantywillbepaidbyOfceStarProducts.
FEATURE
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (1) in to allow the arms to
move up or down freely. Release the button (1) once the desired
height is reached.
5565 AIR GRID SEAT & BACK DELUXE VISITORS CHAIR
OPERATING INSTRUCTIONS
© Office Star Products November 2006

PART QTY
1.SledBase................1
2. BackAssembly . . . . . . . . . . . . 1
3.SeatCushion. . . . . . . . . . . . . . 1
4.Arms(4L&4R). . . . . . . . . . . . 2
5. BackSupport(pre-installed) . . 1
6. FlatWasher. . . . . . . . . . . . . . . 6
7. PhillipsHeadScrew. . . . . . . . . 6
8. HexHeadPhillipsScrew. . . . . 4
9. AllenScrew. . . . . . . . . . . . . . . 3
10. AllenWrench. . . . . . . . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Attach Arms (4L & 4R) to Seat Cushion (3), using three Flat Washers (6) and Three Phillips Head Screws (7) for each arm,
FULLY TIGHTEN ALL SCREWS USING PHILLIPS SCREWDRIVER (not provided).
STEP 2 Attach Sled Base (1) to Seat Cushion (3) with arrow pointing towards the front of the chair, secure Sled Base (1) using four Hex Head
Phillips Screws (8), FULLY TIGHTEN ALL SCREWS USING PHILLIPS SCREWDRIVER (not provided).
STEP 3 Attach Back Support (5) to Sled Base (1) using three Allen Screws (9), FULLY TIGHTEN ALL
SCREWS USING ALLEN WRENCH (10).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
5565 AIR GRID SEAT & BACK DELUXE VISITORS CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products November 2006
PhillipsScrewdriveralsoneeded
forassembly(notprovided)
1
2
3
4L
4R
5
6
78
9
10
3
6
7X3 X3
X4
X3
STEP 1 STEP 2
STEP 3
X3 X3