Office Star Products STC3020 User manual

STC3020 STACK CHAIR
OPERATING INSTRUCTIONS
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or
missing. Our customer Service Department will do everything possible to promptly remedy the problem. TOLL FREE PARTS NUMBER
1-800-950-7262, Fax [phone] Monday through Friday 8:00 a.m. - 5:00 p.m. Pacic Time or e-mail: parts@ofcestar.net.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts and screws are
securely tightened.
3. Check that all bolts and screws are tight every six
months or as needed.
4. Dispose of packing material properly. Do not
use plastic cover as head covering. It may cause
suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.
Warranty
15 Year limited warranty on all non moving metal parts. Seat plate,
pneumatic cylinder, wood, plastic parts, base and casters for 5 years.
Upholstery fabric against wear and deterioration for 3 years.
To make a warranty claim, contact Customer Service. Provide
model number and description of the problem. At it’s option Ofce
Star Products will: (a.) Supply compatible components of current
manufacture. (b.) Repair the customer’s component. The customer
must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Ofce Star
Products.
All warranties are limited to the original purchaser for normal
residential usage by persons weighing 250 lbs. or less.

STC3020 STACK CHAIR
ASSEMBLY INSTRUCTIONS
DETAIL A:
© Ofce Star Products June 2002
Part QTY
1. Frame (1L & 1R) . . . . . . . . . . 2
2. Cross Bars. . . . . . . . . . . . . . . 2
3. Seat Cushion. . . . . . . . . . . . . 1
4. Back Cushion . . . . . . . . . . . . 1
5. Long Screws . . . . . . . . . . . . . 4
6. Short Screws . . . . . . . . . . . . . 4
DETAIL B:
4
6
5
1R
4
1L
3
6
6
2
5
3
2
STEP 1 Remove all the parts from carton, separate them into part numbers indicated
on the list and make sure part quantities are correct.
STEP 2 Lay Frame (1L) on its side. Insert Cross Bars (2) into the frame (1L). Using two
Long Screws (5) attach (1L) to Seat Cushion (3). Insert (1R) to Cross Bars (2) using two Long Screws (5) attach Seat Cushion (3). FULLY TIGHTEN
ALL FOUR SCREWS. (SEE DETAIL A)
STEP 4 Align the holes on the Frame (1L & 1R) with the holes on the Back Cushion (4) and insert Short Scews (6). (SEE DETAIL B)
FULLY TIGHTEN ALL SCREWS BY PHILLIP SCREW DRIVER.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.