OFYR MISE EN PLACE 65 PRO User manual

MANUAL
OFYR MISE EN PLACE TABLE PRO

2OFYR®MANUAL - OFYR®MISE EN PLACE TABLE PRO
TABLE OF CONTENT
1. INTRODUCTION 3
1.1 OFYR® Mise en Place Table 65 PRO and 135 PRO, parts and intended use 3
2. SAFETY AND SETUP INSTRUCTIONS 4
3. DISCLAIMERS 4
3.1 Safety and setup-, intended use- and maintenance instructions/tips 4
3.2 Corten steel 4
3.3 Black-coated steel 5
4. WARRANTY TERMS PER ELEMENT 5
5.WOODEN BLOCKS 6
5.1 Intended use 6
5.2 Maintenance tips 6
6. CERAMIC BLOCKS 6
6.1 Intended use 6
6.2 Maintenance tips 7
6.3 Prepare the block for assembly of the OFYR®Mise en Place table PRO 7
7. ASSEMBLY INSTRUCTIONS 8
7.1 OFYR®Mise en Place Table Classic 65 PRO and OFYR®Mise en Place Table 65 PRO 8
7.2 OFYR®Mise en Place Table 135 PRO 9
SYMBOLS AND ICONS
Danger! Risk of serious or deadly injury or severe product damage.
Warning! Risk of injury or product damage.
Notice! Useful information.

3OFYR®MANUAL - OFYR®MISE EN PLACE TABLE PRO
EN
1. INTRODUCTION
THANK YOU SO MUCH FOR BUYING AN OFYR®PRODUCT. THIS MANUAL CONTAINS
ASSEMBLY INSTRUCTIONS, WARRANTY CONDITIONS, AND ADDITIONAL INFORMATION
ABOUT YOUR OFYR®MISE EN PLACE TABLE 65 PRO AND 135 PRO.
1.1 OFYR®MISE EN PLACE TABLE 65 PRO AND 135 PRO, PARTS AND INTENDED USE
Equipped with a handle, 2 swivel casters (on the side of the handle) and 2 rigid casters, the OFYR®
Mise en Place Table 65 PRO and 135 PRO includes a Teak wooden or ceramic dark grey chopping
board for food preparation, handy accessories tray and options for under-counter wood storage.
OFYR®MISE EN PLACE
TABLE CORTEN 65 PRO
TEAK WOOD
OFYR®MISE EN PLACE
TABLE CORTEN 65 PRO
CERAMIC DARK GREY
OFYR®MISE EN PLACE
TABLE BLACK 65 PRO
TEAK WOOD
OFYR®MISE EN PLACE
TABLE BLACK 65 PRO
CERAMIC DARK GREY
OFYR®MISE EN PLACE
TABLE CORTEN 135 PRO
TEAK WOOD
OFYR®MISE EN PLACE
TABLE CORTEN 135 PRO
CERAMIC DARK GREY
OFYR®MISE EN PLACE
TABLE BLACK 135 PRO
TEAK WOOD
OFYR®MISE EN PLACE
TABLE BLACK 135 PRO
CERAMIC DARK GREY
OFYR®MISE EN PLACE
TABLE CLASSIC CORTEN 65
PRO TEAK WOOD
OFYR®MISE EN PLACE
TABLE CLASSIC CORTEN 65
PRO CERAMIC DARK GREY
OFYR®MISE EN PLACE
TABLE CLASSIC BLACK 65
PRO TEAK WOOD
OFYR®MISE EN PLACE
TABLE CLASSIC BLACK 65
PRO CERAMIC DARK GREY

4OFYR®MANUAL - OFYR®MISE EN PLACE TABLE PRO
2. SAFETY AND SETUP INSTRUCTIONS
Due to the considerable weight of the elements unpacking and placing of the product
should be done by at least 2 people.
While the corrosion is still superficial, the Corten steel elements may cause orange
stains on clothes, skin, and the surface they stand on. When it rains, corrosive water may
also run off these elements, which may permanently stain light-toned stone or wooden
surfaces.
When mounting the parts of your OFYR®Mise en Place Table PRO do not use the handle
to tilt the base. The handle is only suited to pull or push the device once the wheels are
mounted.
The OFYR®Mise en Place Table Black 65 PRO and 135 PRO are more sensitive to damage
during setup because of its coating.
Only place OFYR®Mise en Place Table PRO on a hard, leveled, and stable surface.
The wheels of your OFYR®Mise en Place Table PRO are not equipped with breaks. If the
surface is not completely level, wedges should be put under the wheels in order to be
certain that the table cannot move.
We strongly advise against leaving the wooden board on the table outdoors.
This because wood is a natural product and is always liable to warp somewhat.
3. DISCLAIMERS
3.1 SAFETY AND SETUP-, INTENDED USE- AND MAINTENANCE INSTRUCTIONS/TIPS
We are not liable for any injuries or damages as a consequence of not following our safety and setup-,
intended use- and maintenance instructions/tips.
3.2 CORTEN STEEL
OFYR®Mise en Place Table Corten PRO is made of Corten steel: a metal with a natural layer of
corrosion that protects against rust perforation and is designed to withstand all weather conditions.
OFYR®Mise en Place Table Corten PRO come with the additional service that the corrosion process
has already started by the time they are delivered. Upon delivery, it takes another 6-12 months for
the initial corrosion to turn into a fully protective layer.
The unit’s color may change over time as the corrosion process may not yet have fully
unfolded. We are not liable for the way the color wil change.
Any Corten steel components that are less corroded than others upon delivery are
not eligible for replacement. All components will corrode naturally over time under
influence of the weather. We are not liable for differences of corrosion between different
components.

5OFYR®MANUAL - OFYR®MISE EN PLACE TABLE PRO
EN
While the corrosion is still superficial, the Corten steel elements may cause orange
stains on clothes, skin, and the surface they stand on. When it rains, corrosive water
may also run off these elements, which may permanently stain light-toned stone or
wooden surfaces. We are not liable for stains as a consequence of corrosion.
3.3 BLACK-COATED STEEL
Please note that the OFYR®Mise en Place
Tables Black PRO have a coating and
are thus more sensitive to damage during
setup and use. We are not liable for any
damage or consequential damage resulting
from the setup or use of your OFYR®Mise en
Place Table Black PRO. For small repairs the
OFYR®Mise en Place Tables Black PRO come
with a free Repair Bottle.
Due to weather and sunlight the coating can be subject to discolouration.
We are not liable for such discolouration.
4. WARRANTY TERMS PER ELEMENT
A limited lifetime guarantee applies to the material and construction of the OFYR®Mise en Place
Tables PRO for the original buyers or owners, provided that they purchased their unit from an
authorised dealer and registered their warranty in the required manner through OFYR Club at
www.ofyr.club.
This warranty covers manufacturing defects. It applies to the original buyers or owners of
an OFYR®Mise en Place Table PRO, provided that
•They purchased their unit from an authorized dealer
•They assembled, used and maintained the OFYR®Mise en Place Table PRO
according to the instructions in this manual.
NOT COVERED BY WARRANTY
•Wear, corrosion, deformation and discolouration of parts exposed to fire;
•Corrosion and discolouration caused by external influences;
•Visual irregularities inherent to the manufacturing process.
•Damages caused by not following our safety and setup-, intended use- and
maintenance instructions/tips.
B2C B2B
Corten steel 5 years 3 years
Black coated steel 2 years 1 year
Wooden blocks 2 years 1 year
Ceramic Dark Grey blocks 2 years 1 year
Wheels 2 years 1 year

6OFYR®MANUAL - OFYR®MISE EN PLACE TABLE PRO
5. WOODEN BLOCKS
All wooden blocks are made from Teak wood. Teak’s high oil content, high tensile strength and tight grain
make it particularly suitable where weather resistance is desired.
5.1 INTENDED USE
•Wood is a natural product and should therefore be stored indoors.
•Do not use the wooden boards as a chopping board.
Using sharp objects causes irreparable damage.
•Do not use heavy objects as exerting large forces on the wooden block
can cause irreparable damage.
5.2 MAINTENANCE TIPS
• Before the rst use: Clean the worktop thoroughly with a mild detergent.
•Use a damp cloth and mild detergent for daily cleaning.
Make sure to clean the block after every use.
•Cleaning of persistent stains: use a damp cloth or a sponge (no scourer) with a mild detergent.
•Clean the wood in the direction of the nerve to retain the quality of the material.
•Dry the block after cleaning.
•All teak wooden boards have been treated with vegetable oil in order to protect them against
dirt and humidity. We recommend that users of these products will also treat these boards at
least once a year with such oil and in case of frequent use more often.
Do not clean the wooden boards with corrosive substances
or clean them in a dishwasher.
After use the wooden blocks should be stored indoors, in a dry place with low humidity.
Large dierences in temperature and humidity may cause the wood to warp.
6. CERAMIC BLOCKS
Ceramics are industrially manufactured, baked products. A print is added to the top layer of clay, the main
component, which then is baked on an extremely high temperature. Distinctive element of ceramics are its
very practical characteristics: it is hygienic and resistant to stains, scratches and heat.
6.1 INTENDED USE
•Ceramics are weather proof and can be stored outdoors on a permanent basis.
•Ceramics are a very compact and tough mass, making it relatively vulnerable for
impact damaging. Therefore, be careful with for example heavy objects,
because the impact of these falling on a worktop might cause irreparable damage.
•We recommend using a cutting board to prevent your knives from getting blunt.
•Avoid contact with acetone and with extremely aggressive cleaning agents
such as metal cleaners, drain cleaners and other products with a
pH-value <2 or >12.
•Never stand on the ceramic block.

7OFYR®MANUAL - OFYR®MISE EN PLACE TABLE PRO
EN
6.2 MAINTENANCE TIPS
• Before the rst use: remove possible glue residues with a plastic scraper
and clean the worktop thoroughly with a mild detergent.
•Use a damp cloth with a mild detergent for daily cleaning.
Make sure to clean the block after use.
•Clean the block more intensive a few times a year.
•Cleaning of persistent stains: use a mild detergent with a damp cloth
or sponge (no scourer).
•Do not clean the blocks in the dishwasher.
6.3 PREPARE THE BLOCK FOR ASSEMBLY OF THE OFYR®MISE EN PLACE TABLE PRO
1x
L
1X
4x
M
L
M
N
4x
N
L

8OFYR®MANUAL - OFYR®MISE EN PLACE TABLE PRO
A
C
D
E
F
FG
G
B
A
PARTS LIST
A. Wooden/Ceramic board
B. Tooltray
C. Wooden part of the handle
D. Corten steel part of the handle
E. OFYR®Mise en place 65 PRO Base
F. Swivel casters
G. Rigid casters
2x
7. ASSEMBLY INSTRUCTIONS
7.1 OFYR®MISE EN PLACE TABLE CLASSIC 65 PRO AND OFYR®MISE EN PLACE TABEL 65 PRO
1x
23x
H
F
G
2x16x
H
2x
H

9OFYR®MANUAL - OFYR®MISE EN PLACE TABLE PRO
EN
PARTS LIST
A. Wooden/Ceramic board
B. Tooltray
C. Wooden part of the handle
D. Corten steel part of the handle
E. OFYR®Mise en place 135 PRO Base
F. Swivel casters
G. Rigid casters
7. ASSEMBLY INSTRUCTIONS
7.2 OFYR®MISE EN PLACE TABELE 135 PRO
1x
23x
H
16x
G
F
2x2x
A
B
CD
E
F
F
G
G
H
2x
H

10 OFYR®MANUAL - OFYR®MISE EN PLACE TABLE PRO

11OFYR®MANUAL - OFYR®MISE EN PLACE TABLE PRO
EN

For further information, please contact one of
our ocial distributors or dealers.
www.ofyr.com/store-locator
Copyright OFYR.
All rights reserved.
OFYR Global B.V.
Gewenten 43A
4704 RE Roosendaal
Nederland
[phone]
[email protected]
www.ofyr.com
The design of some OFYR products have EU registration under no
02580431-0001/2, no 003122373-0001 and no 007454590-0001.
US Design Patents are registered under no US D798099 S and no
US D830095 S.
DEC 2020 - V01
Your language
not found? Please
take a view with
this QR-code