4
PUSH PUSH
Model Serial Number
Introduction
Congratulations on having purchased an OHM PP-1 Patch Panel
Please read this manual and familiarise yourself with the operation of your OHM PP-1 Patch Panel
before you attempt to power up this unit. For your own safety we recommend you take the time to
read all the warnings and precautions on the page opposite and study the connection details to
ensure correct usage and avoid any misuse which may invalidate your warranty.
Record the model and serial number, found on the back of the unit, in the spaces designated on the
warranty card and in the space provided below. Refer to the model and serial number whenever you
call upon your dealer for information or service on this product.
Unpacking
Carefully open the shipping carton and check for any noticeable damage.
Every OHM has been rigorously tested and inspected before being carefully
packaged, prior to shipping. If any damage has occurred to the packaging or the unit during transit,
please notify the delivery company as soon as possible. Only the consignee can file a claim against
the carrier for shipping damage. Be sure to save the carton and all packing materials for the carriers
inspection.
We recommend that you retain the original carton and packing materials for use should you transport
or ship the unit in future.
PP-1 Patch Panel
Mounting
Front and rear mountings are fitted to each unit, which conform to standard 19” rack strip
specifications. We recommend that you make use of these mountings and install your Patch Panel in
a suitable equipment rack, such as a UC-Series Flight case, also available from OHM. Please refer to
the specification table (page 2) for the correct height and depth information for your particular model
and ensure sufficient rack space is available.
Precautions
!
!
!
!
!
!
!
!
!
Retain this manual for future reference.
Do not stand the patch panel vertically on it’s rear.
Always check that the correctly rated power is supplied to your unit.
When connecting external units to this unit ensure that correctly wired connectors are used, refer
to the user manual for the external unit for this information.
Avoid direct contact of your unit with water or other liquids. Do not operate while standing in
liquid.
When cleaning the unit wipe with a soft, dry cloth. If more heavy duty cleaning is required
disconnect from the mains and use a damp cloth, ensuring that the unit is completely dry
before reconnecting to the mains.
Do not use solvents or chemicals on the exterior of the unit as they may cause the surface to
discolour and peel.
Do not use this unit with frayed or broken power cords.
If you experience continuous problems, disconnect from the mains and refer to a qualified
service engineer.
