SOUND LECTERNS
— 22 —
www.oklahomasound.com ACCESSORIES
ACCESSORIES
Wireless Conversion Kits & Accessories
I
Use With Any of Our Lecterns
Model MH
I
Microphone Holder
Universal size black plastic microphone holder fits most standard size microphones.
5/8” ID connector screws onto gooseneck. Slide microphone into clip.
Model GSN
I
13” Gooseneck Assembly
Choose from Black or Chrome colored 13” flexible gooseneck arm. Includes mount
with three screws.
Model SM
I
Shock Mount Mic Holder
Exclusive designed microphone holder screws onto gooseneck to hold microphone
with a built in feedback eliminating feature. Rubber inside absorbs acoustical
feedback.
Model FRL
I
Fluorescent Reading Light
“Under – The – Counter” florescent reading light with on/off switch. Swivels on
hinges to provide light to your presentation materials (for #501).
Model BRL
I
Brass Reading Light
Attractive brass reading lamp with on/off switch is available with brass clip to
connect to your reading surface or factory installed. Operates on 117 AC .25 Watt
bulb included.
Mic-1
I
Electret Condenser Mic with 9’ Cable
Metallic look handheld unidirectional electret condenser mic has 9’ cable for
freedom of movement. Frequency and sensitivity matches all OSC lecterns.
Mic-2
I
Dynamic Unidirectional Mic with 9’ Cable
Metallic look dynamic unidirectional handheld microphone has 9 ft cable and
operates on most OSC lecterns and other equipment.
Mic-3
I
Tie-Clip Mic Electret Condenser with 10’ Cable
Lapel style electret condenser microphone comes with clip to connect to your tie,
collar, shirt or blouse. 10 ft. cable for hands free maneuverability.
Mic-7
I
Headset Microphone
Allows comfortable use around head for handsfree use. Connect to seperate
transmitter - beltpack.
Model PS12V
I
12V 5 Amp Rechargeable Battery
Connect this 12V rechargeable battery pack with included cable to any of our
lecterns for battery power. 20 hour life. Lecterns recharge battery overnight.
#300
I
Extension Speaker
Double and triple your sound range from
any OSC lectern. Ideal for transmission of
sound to separate rooms. Features two 8”
full range speakers with 35’ cable and con-
necting hardware. Cabinet is 23”H x 14”W
x 8”D, in Walnut or Medium Oak laminate.
Mounted on Black 11⁄4” base.
Speaker.......................Two 8” Full Range: 10W, 8 ohm
Cable..................................................... 35’ with .25” Jack
Dimensions........................................23”H x 14”W x 8”D
Convert any of our lecterns into wireless with these State of the Art wireless microphone kits. Simply plug included receiver into your
lectern; attach included antennae into transmitter microphone and move freely 50 – 200 ft from lectern! Select from two options.
WM-100H
I
Wired-Wireless
WIRED-WIRELESS MIC SYSTEM
Use as wired mic, simply attach 14’ cable. Or go wireless up to 50 ft.
away! Includes transmitter and receiver station. Self-contained in an
attractive carrying case. Uses one AA and AAA battery (included).
Frequency Range............................ 111 – 115 MHz
WM-190TC
I
Tie-Clip System
TIE-CLIP LAVALIER WIRELESS MIC SYSTEM
Includes pocket size transmitter and receiver with a clip-on mic. Uses
two 9 volt batteries (not included). Includes belt clip and necessary
cables. Select channel A or B to eliminate outside frequency interruption.
Move freely up to 200 ft .
Frequency Range...................Channel A: 171.105 MHz; Channel B: 171.845 MHz
_OSC_08_catalog_B.indd 22 8/17/07 2:41:23 PM
