Oklahoma Sound EduTouch EDTC User manual

1
EduTouch
Instruction Manual
Model # EDTC

2
EduTouch– Sit and Stand Cart
Dear Valued Customer,
Thank you for your purchase. Although extreme care goes into manu-
facturing and packaging of this product, mistakes are possible. If you
encounter any missing parts or difficulty in assembly, etc. please call
our toll free customer service line at 1-800-261-4112 for courteous
and immediate resolution to your problem.
Sincerely,
OKLAHOMA SOUND
149 Enn Road, Clion NJ 07014 - [phone] FAX; [phone]—Email: [e-mail]

3
Required Tools for Assembly
2) Allan Wrench
1) Crescent Wrench

4
EduTouch - Sit and Stand Cart
Part Description Quantity
A
C
D
Main reading surface
Adjustable Pole
Main Base
Keyboard Tray
1
1
Keyboard Support Tubes
E
B
1
1
1

5
Part Description Quantity
F
Casters Non-Locking 2
G
Casters Locking 2
Allan Bolt—1/2”
Allan Bolts 1 1/4”
6
2
2
H
I
J
K
Main Column Bolts
LKnobs 2
4
Allan Bolt– 5/8”

6
AB
Step Number One
Lay down part B (main reading surface) on a clean surface.
D
Step Number Two
Do the following to complete this step. A) Screw the keyboard sliders into the main bracket
(part B) right beneath the knobs (park L) using two bolts (part I) , Note the two arrows.
B) Screw in two bolts (part H) into the top two holes on the main reading surface (part B)

7
Step Number Three
Take part C (adjustable pole ) and align the four holes to the four holes on the main bracket. Install it
using four bolts (part H) .
Step Number Four
Take part D (main base) and assemble it to part C (adjustable pole) using two Column bolts (part K).
Using a wrench, fully ghten bolts.

8
Step Number Five
Assemble four casters ; Two locking in the front and non-locking in
the back. Use a wrench to complete this step.
C
E
Step Number Six
Take part E (keyboard tray) and assemble it to part A
(keyboard sliders ) using the four longer bolts (part J ).