OLG Team Boardroom Table Twin Span User manual

TOOLS REQUIRED: Powered screwdriver.
Installation Guide
myolgoffice.com
Team Boardroom
Table Twin Span

INSTALLATION GUIDE
myolgoffice.com
Team Boardroom Table Twin Span
COMPONENTS
1Leg x6
2Adjustable Foot x6
3Leg Cable Cover x6
4Rail Lengths x4
5Rail Widths x3
62 Way Connector x4
72 Way Connector Cap x4
83 Way Connector x2
93 Way Connector Cap x2
10 Rail Space Bracket x7
11 Slot Nut x7
12 Table Top x1
SCREWS
13 M8x20mm Dome Head x7
14 M8x12mm Dome Head x14
15 M8x20mm Cap Head x6
16 M5x20mm Self Tapping x26
1
10
2
3
12
11
13
15
14
6
4
8
5
97

INSTALLATION GUIDE
myolgoffice.com
Team Boardroom Table Twin Span
01
03 04
02
Securely connect legs to rails lengths using the shorter M8x20mm dome head
bolts.
Slide the 2 way and 3 way connectors over each leg, and securely lock into place
using M8x20mm cap head bolts.
Securely connect legs to rails widths using the shorter M8x20mm dome head
bolts.
Loosely connect the longer M8x20mm dome head bolt and slot nut through the
rail spacer bracket. Slide onto required rails and fully tighten in place. 800mm or
longer rails require 1 bracket, 1600mm or longer rails require 2 brackets.

INSTALLATION GUIDE
myolgoffice.com
Team Boardroom Table Twin Span
05
Optional
06
Loosely connect the shorter M8x12mm dome head bolt and slot nut through the
metal rail spacer bracket. Slide onto required rails and fully tighten in place.
Ensure the worksurface is centered over the frame. Pre-drill holes in the
worksurface. Fully tighten all M5x20mm self tapping screws through
each leg and rail spacer bracket into the 25mm worksurface.
Conceal any power box cables using the magnetic leg cable covers.