OLG Team Table 4 Leg User manual

TOOLS REQUIRED: Powered screwdriver.
myolgoffice.com
Team Table 4 Leg
Installation Guide

myolgoffice.com
Team Table 4 Leg
INSTALLATION GUIDE
COMPONENTS
1 Leg x4
2 Adjustable Foot x4
3 Leg Cable Cover x4
4 Rail x4
5
6
2 Way Connector x4
7
2 Way Connector Cap x4
Table Top x1
SCREWS
8 M8x12mm Dome Head x8
9 M8x20mm Cap Head x4
10 M5x20mm Self Tapping x8
1
2
3
4
5
67
9
8
10

myolgoffice.com
Team Table 4 Leg
INSTALLATION GUIDE
01
03 04
02
Slide the 2 way connectors over each leg, and securely lock into place using
M8x20mm cap head bolts.
Securely connect legs to rails widths using the shorter M8x20mm dome head
bolts.
Securely connect legs to rails lengths using the shorter M8x20mm dome head
bolts.
Ensure the worksurface is centered over the frame. Pre-drill holes in the
worksurface. Fully tighten all M5x20mm self tapping screws through each leg and
rail spacer bracket into the 25mm worksurface.

myolgoffice.com
Team Table 4 Leg
INSTALLATION GUIDE
05
Conceal any power box cables using the leg cable covers.