OLG Motion Sync Chair Armrest User manual

Assembly Instructions
Motion Sync Chair Armrest

Motion Sync Chair Armrest
Components List
2Motion Sync Chair Armrest Assembly Instructions
STEP 1: Measure 150mm from the back of the seat and 80mm
from the edge of the seat to find the first hole.
STEP 2: Using your finger, use pressure to locate the insert nut
under the fabric. Using a knife, make a small incision
over the hole to allow the bolt to go through.
Note: Making this small incision will NOT void your
warranty..

Motion Sync Chair Armrest
3Motion Sync Chair Armrest Assembly Instructions
Assembly Instructions
STEP 3: Locate the other two holes and make the same small
incisions in the same manner as the first hole.
STEP 4: Tighten bolts until the arm is firmly attached.
STEP 5: Repeat steps 1-4 for the opposite arm.

Sydney 02 8188 2732
Melbourne 03 9111 0315
Brisbane 07 3733 1923
Adelaide 08 7111 0810
Perth 08 9468 2707
info@olgoffice.com
myolg.online | olgoffice.com | officedesigner.net | motionoffice.com