Olivetti OFX 2100 User manual

&AcSIMILE
/&81
)N3425CTIONS

PUBLICATION ISSUED BY:
Ing. C. Olivetti & C., S.p.A.
Servizi di Documentazione
77, Via Jervis - 10015 Ivrea (Italy)
Copyright © 1994, Olivetti
All rights reserved
This equipment complies with the provisions laid down by the CEE 87/308
directive for the prevention and elimination of radio interference
copy-e.p65 17/04/00, 23.041

I
CONTENTS
BEFORE USE 1
INTRODUCTION 3
PRODUCT OVERVIEW 3
HOW TO PREPARE THE FAX MACHINE FOR USE 4
GETTING TO KNOW THE FACSIMILE MACHINE 5
COMPONENTS 5
CONSOLE 6
PREREQUISITE FOR ACCESS 14
CONSUMABLES 15
PAPER 15
ADJUSTING THE PAPER TRAY 16
PRINT CARTRIDGE 16
PROGRAMMING 17
ACCESS TO PROGRAMMING PROCEDURES 17
PROGRAMMING ONE-TOUCH DIALLING KEYS 19
PROGRAMMING SPEED DIALLING CODES - NORMAL AND EXTENDED 23
CLEARING PROGRAMMED DATA 27
PRINTING PROGRAMMED DATA 27
CHANGING THE DATE AND TIME 29
CHANGING THE SENDER’S FACSIMILE NUMBER 30
STORING THE SENDER’S NAME 31
SETTING PASSWORDS 33
CHANGING OR DELETING PASSWORDS 35
SETTING RESERVED POLLING IDENTIFIERS 36
PRINTING THE RESERVED POLLING IDENTIFIERS 38
SELECTING THE DIALLING MODE 39
SETTING OPERATING CONFIGURATION PARAMETERS 40
PRINTING THE OPERATING CONFIGURATION PARAMETERS 45
CLOSED NETWORK FEATURE 47
BEFORE TRANSMITTING/COPYING 48
DOCUMENTS THAT CAN BE TRANSMITTED/COPIED 48
PREPARING THE DOCUMENT FOR TRANSMISSION/COPYING 48
TRANSMISSION 53
AUTOMATIC STORAGE 53
TRANSMISSION FROM THE ADF 53
TRANSMISSION DIALLING ON THE TELEPHONE 56
DELAYED TRANSMISSION 57
RESERVED TRANSMISSION 59
BROADCAST TRANSMISSION FROM THE MEMORY - IMMEDIATE OR DELAYED 61
POLLING TRANSMISSION 63
indice.p65 13/04/00, 23.121

II
CONTENTS
RECEPTION 65
CHANGING FROM AUTOMATIC TO MANUAL RECEPTION AND VICEVERSA 65
MANUAL RECEPTION 66
MANUAL RECEPTION WITH THE FAX/PHONE SWITCH ENABLED 67
AUTOMATIC RECEPTION 68
POLLING RECEPTION 68
RECEPTION REPLY STORING 70
ACTIVITY HANDLING 71
ACCESS TO “ACTIVITY HANDLING” 71
CONNECTION ACTIVITIES 72
DOCUMENTS STORED 77
COMPLEMENTARY FUNCTIONS 80
TELEPHONE CONVERSATION ON THE FACSIMILE MACHINE 80
ANSWERING A FACSIMILE OR TELEPHONE CALL WITH THE FAX/PHONE SWITCH ENABLED 81
ANSWERING A FACSIMILE OR TELEPHONE CALL WITH AN ANSWERING DEVICE
CONNECTED 81
ANSWERING A TELEPHONE CALL WHILE SENDING OR RECEIVING A DOCUMENT 82
SENDING OR RECEIVING A DOCUMENT AFTER A TELEPHONE CONVERSATION82
TELEPHONE CONVERSATION AFTER SENDING OR RECEIVING A DOCUMENT 83
REGULATING THE VOLUME OF THE SPEAKER 83
COPYING FUNCTION (SINGLE OR MULTICOPY) 84
REPORTS 86
LAST TRANSMISSION REPORT 86
LAST RECEPTION REPORT 88
ACTIVITY REPORT 90
POWER FAILURE REPORT 93
FILLING UP/ELIMINATING PAPER JAMS 94
ADDING PAPER 94
REMOVING JAMMED DOCUMENTS 94
REMOVING JAMMED PAPER 95
MAINTENANCE 97
REPLACING THE PRINT CARTRIDGE 97
REPLACING THE PRINT HEAD 99
CLEANING THE OPTICAL READER 100
CHECKING THE PRINT HEAD NOZZLES 101
CLEANING THE ELECTRICAL CONTACTS OF THE PRINT CARTRIDGE 103
CLEANING THE PRINT HEAD PAD 103
PURGING THE PRINT HEAD 104
SOLVING PROBLEMS BY YOURSELF 104
indice.p65 13/04/00, 23.122

III
CONTENTS
SIGNALS AND SERVICE CODES 107
AUDIBLE SIGNALS 107
MESSAGES ON THE DISPLAY 109
SERVICE CODES 111
CHARACTER SET TABLE 114
OPTIONS 115
PC/FAX MULTIFUNCTIONS 115
GENERAL CHARACTERISTICS OF THE FACSIMILE MACHINE 116
indice.p65 13/04/00, 23.123

FCC Regulation
In accordance with FCC regulations, the following information concerns the information required
to be supplied on a fax.
Part 68, Section 68.381 (c) (3) of FCC Regulations states the following:
"Telephonefacsimilemachines:identificationofthesenderofthemessage.Itshallbeunlawfulfor
any person within the United States to use a computer or other electronic device to send any
message via a telephone facsimile machine unless such message clearly contains, in a margin at
the top or bottom of each transmitted page or on the first page of the transmission, the date and
time it is sent and an identification of the business, other entity, or individual sending the message
and the telephone number of the sending machine or such business, other entity, or individual.
Telephone facsimile machines manufactured on and after December 20, 1992 must clearly mark
such identifying information on each transmitted message".
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules.
These limits are designated to provide reasonable protection against interference in a residential
installation.
This equipment generates, used and can radiate radio frequency energy and, if not installed and
usedinaccordancewiththeinstruction,maycauseharmfulinterference to radiocommunications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet of a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for assistance.
Changesormodificationnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoid
the user's authority to operate the equipment.
Connecting of peripherals required the use of grounded shielded signals cables.
Thisequipment complieswithPart68ofthe FCC rules.Ontherearofthis equipmentisalabelthat
contains,amongotherinformation,theFCCRegistrationNumberandRingerEquivalenceNumber
(REN) for this equipment. You must, upon request, provide this information to your telephone
company.
This equipment uses the following USOC jacks: RJIIC
FOR USA USERS
warb2100.p65 13/04/00, 23.171

TheRENisusedtodeterminethequantityofdevicesthatmaybeconnectedtothetelephoneline,
Excessive RENs on the telephone line may result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be
certainofthenumberofdevicesthatmaybeconnectedtotheline,asdeterminedbythetotalRENs,
contact the telephone company to determine the maximum REN for the calling area.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. If advance notice is not
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment operations, or procedures
thatcouldaffecttheoperationoftheequipment.Ifthishappens,thetelephonecompanywillprovide
advance notice in order for you to make the necessary modifications in order to maintain
uninterrupted service.
Iftroubleisexperiencedwiththisequipment,pleasecontactOlivettiOfficeUSA1-800-2222310for
repair and warranty information. If the trouble is causing harm to the telephone network, the
telephone company may request you remove the equipment from the network until the problem is
resolved.
No repairs may be done by the customer.
This equipment cannot be used on telephone company-provided coin service.
Connection to Party Line Service is subject to state tariffs.
This equipment is hearing-aid compatible.
When programming and/or making test calls to emergency numbers:
. Remain on the line and briefly explain to the dispatcher the reason for the call.
. Perform such activities in the off-peak hours such as early morning or late evenings.
warb2100.p65 13/04/00, 23.172

FOR CANADIAN USERS
INDUSTRY CANADA NOTICE
The Load Number of this modem is 3.
ThestandardconnectingarrangementcodeforthisequipmentasspecifiedinCP-01,Section1.8.3
is CA11A.
TheLoad Number assignedto each terminaldevice denotes thepercentage of thetotal load tobe
connected to a telephone loop that is used by the device to prevent overloading. The termination
on a loop may consist of any combination of devices subject only to the requirement that the total
of the load numbers of all devices does not exceed 100.
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus",
ICES-003 of the Industry Canada".
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériquesdeClasseBprescritesdanslanormesurlematérielbrouilleur:"AppareilsNumeriques",
NMB-003 édictée par le ministre des Communications".
The Industry Canada label identifies certified equipment. This certification means that the
equipment meets certain telecommunications network protective operational and safety require-
ments. Industry Canada does not guarantee the equipment will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilitiesofthelocal telecommunications company. The equipment must also be installed using an
acceptable method of connection. In some cases, the company's inside wiring associated with a
single line individual service may be extended by means of a certified connector assembly
(telephone extension cord). The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility
designated by the supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power
utility, telephone lines and internal metallic water pipe system, if present, are connected together.
This precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but should contact
the appropriate electric inspection authority, or electrician, as appropriate.
warb2100.p65 13/04/00, 23.173

Notice for Connection to the Telecommunication Systems
1. BABT Certificate Number/Approval Number for the OFX 2100: NS/1258/3/P/603987.
APPROVED for connection to telecommunication systems specified in the instructions for use subject
to the conditions set out in them.
2. This apparatus has been approved for the use of the following facilities.
1. Storage of telephone numbers for retrieval by a predetermined code. (If problems occur, verify
stored number).
2. Automatic Call initiation
3. Use on a PABX which returns Secondary Proceed Indication.
4. Operation in the presence or absence of Initial or Secondary Proceed Indication.
5. Automatic Dialling Facilities
6. Automatic Storage of last number dialled
7. Automatic Repeat Attempt Facilities
8. Auto Clear from the call originating end
9. Series Connection Facility
10. Call Progress Monitor
Anyotherusagewillinvalidatetheapprovaloftheapparatusifasaresult,itthenceasestoconform
to the standards against which approval was granted.
3. Theconnectionto thetelecommunication systemsmust beunplugged before theearth isdisconnected.
The connection to the telecommunication systems must not be hardwired.
4. ThisapparatusmaybeusedontelecommunicationsystemsemployingloopdisconnectofMFsignalling.
5. This apparatus is not suitable as an extension to a payphone for use on shared service lines or for use
on 1+1 carrier systems.
6.THE USER MUST ENSURE THAT ALL TELEPHONE NUMBERS PROGRAMMED INTO THE "SPEED
DIALLING" AND "CODED SPEED DIALLING" MEMORIES ARE ENTERED CORRECTLY.
7. This apparatus is suitable for connection only to direct exchange lines on the path directly or via a
compatiblePABX.The supplierof the apparatusshould beconsultedfor anup to datelist ofPABXswith
which the apparatus is compatible.
It cannot be guaranteed that the apparatus will operate under all possible conditions of connection to a
compatible PABX. Any cases of difficulty should be referred in the first instance to the supplier of the
apparatus.
notice.p65 13/04/00, 23.141

8. Ringer Equivalence Number (REN) = 3
The REN is a customer guide indicating approximately the maximum number of items of apparatus that
should be connected simultaneously to the line.
The sum of the REN's of the individual items should not exceed 4. The REN value of a B1 telephone is
assumed to be 1 unless otherwise marked.
Only one telephone and the facsimile machine should be connected to the line. Where the telephone is
a separate unit it must only be connected to the appropriate socket on the facsimile apparatus.
9. THE VOLTAGE DROP INTRODUCED BY THE APPARATUS BETWEEN THE PSTN AND THE
ASSOCIATED TELEPHONE AT A CURRENT OF 40mA dc IS 0,4 Volts.
10. FOR THE DEFINITION OF A "RELEVANT BRANCH SYSTEM" OR "RBS", REFER TO BS 6789
SECTION 6.1 CLAUSE 2.4
11. THE LJU SERIES CONNECTOR IS FOR USE WITH AN APPROVED SIMPLE TELEPHONE ONLY.
THIS PORT IS A TNV CIRCUIT AND IS INTENDED FOR CONNECTION TO THE TELEPHONE
NETWORK ONLY.
APPLICATION FOR INSTALLATION OF B.T. SOCKETS
This form may only be required if the wiring is owned by B.T.
If you require suitable sockets for connection of this apparatus complete this form and send it to
your local British Telecom sales office, at the address listed in your telephone book.
To: BRITISH TELECOM
I require .................. sockets for connection of the following equipment
Title FACSIMILE MACHINE
Model OFX 2100
Approval No. NS/1258/3/P/603987
Name ......................................................................................................................................
Address ......................................................................................................................................
......................................................................................................................................
Telephone number ...................................................................................................................
Date ............................ Signed ...................................................................
notice.p65 13/04/00, 23.142

1
BEFORE USEBEFORE USE
This manual is an essential guide for those wishing to learn how to use this facsimile machine.
The “GETTING TO KNOW THE FAX” chapter provides an overview of the product. The drawings which are
easy-to-understand and cover all aspects will help you to quickly become familiar with the product and get
the most out of your fax in no time.
The “CONSUMABLES” chapter provides information on the technical characteristics of the paper and print
cartridge.
The“PROGRAMMING”chapterdescribeshowtosetthemachinetosuityourrequirementsandexplainshow
to store your most frequently used facsimile and telephone numbers for fast, automatic dialling.
The “BEFORE TRANSMITTING/COPYING” chapter introduces you to transmission operations.
The “TRANSMISSION”, “RECEPTION”, “ACTIVITY HANDLING” and “COMPLEMENTARY FUNCTIONS”
chapters illustrate how to implement the most advanced features of the facsimile machine, including the
various
transmission and reception methods, use of the memory, copying, voice calls, etc.
The “REPORTS” chapter provides you with information on the transmission and reception transactions
carried out.
The“FILLINGUP/ELIMINATINGPAPERJAMS”chapterprovidesinstructionsonhowtoaddpaperandinsert
the print cartridge. It shows in what areas paper jams are most likely to occur and how to deal with them.
The“MAINTENANCE”chapterinformsyouoftheperiodicmaintenanceoperationsrequiredandhowyoucan
eliminate faults by yourself.
The “SIGNALS AND SERVICE CODES” chapter describes how the machine informs you of operating errors
and provides additional information on the current operating modes.
The “CHARACTER SET TABLE” chapter shows all the alphanumeric characters that you can display and
select.
The "OPTIONS" chapter describes the additional features that can be used on the facsimile machine.
Finally, the “GENERAL FEATURES OF THE FACSIMILE MACHINE” chapter lists the technical features of
the facsimile machine.
The chapters from the “PROGRAMMING” chapter to the “REPORTS” chapter are laid out in independent
sections, each of which deals with one complete feature. The features are discussed in an order that will
enable you to learn more quickly. As they are independent of each other, they can, however, be consulted
in any order.
Each of these sections consists of:
-An introduction with a short definition of the feature.
-Asection precededby the osymbol describing the situation in which youmust bein orderto carryout
the procedure described (if this part is not included, the feature requires no specific conditions).
cap01.p65 13/04/00, 19.431

2
BEFORE USE
-A last part which describes the operating procedure. When the text appears in two columns, this means
that the information shown on the display (right-hand column) is essential to be able to take the steps
of the procedure (left-hand column).
Textin italics indicates errors, how to prevent and correct them, other actions possibleat that point and other
useful hints.
This manual does not describe how to install the facsimile machine as this procedure is performed by the
service technician.
cap01.p65 13/04/00, 19.432

INTRODUCTION
3
PRODUCT OVERVIEW
A wide range of functions - aimed at reducing costs and increasing productivity - and a high-level reproductive
quality are the product's special features.
SIMULTANEOUS OPERATION
The simultaneous operation of functions (transmission/
receptionwithprogrammingoperations,booking,printing
and copying) ensures a considerable saving in terms of
the operating times required.
CONFIDENTIAL
The use of passwords enable the entire working process
to be controlled, thus guaranteeing that the documents
sent and received will be kept absolutely confidential.
QUALITY
Bubble ink jet technology. Resolution, text/image
separation and grey scale functions ensure that a high
qualityreproductionisobtainedforallkindsofdocuments.
VERSATILITY
Use of the memory in the advanced functions saves time
and reduces operating costs.
FLIEXIBLE PAPER FEED
Large sized documents (max. A3) can be sent directly by
the facsimile machine, which automatically reduces the
format.
MULTIFUNCTIONS
Its serial port enables the facsimile machine to be
connectedtoaPCandthusworkasaprinterandscanner.
cap02.p65 13/04/00, 19.453

INTRODUCTION
4
HOW TO PREPARE THE FAX MACHINE FOR USE
Place the facsimile unit on a stable surface. Leave enough space for a sufficient air flow and so that the
document out tray can be positioned correctly so as to avoid paper piling up and jamming.
Do not expose to direct sunlight and avoid damp, dusty rooms and environments subject to rapid changes in
temperature and humidity.
Set the unit close to a telephone socket. In this way, the existing telephone line can be used and no new line
need be installed.
Connect the facsimile machine to a grounded socket to which no other devices are connected.
WARNING
Take care to remove paper clips and staples from your originals to avoid damaging the facsimile machine.
To prevent paper jams, do not switch the fax off or raise the operator console during transmission, reception
or copying.
For optimum print quality, use the recommended paper of the weight, thickness and format specified in this
manual.
Shouldtheunit malfunction,refer tothe“Solving Problemsby Yourself”section.In mostcases, youwillfind the
solution to the problem. If not, call the technical service engineer.
The manufacturers decline all liability for faults caused by improper use or installation, the connection of
unauthorized devices, or tampering by unauthorized persons.
The ON/OFF switch is only operational. An easily accessible and nearby wall outlet must be used.
To disconnect the machine, remove the power cable plug from the socket.
WARNING: THIS MACHINE MUST BE CONNECTED TO PROTECTIVE EARTH
cap02.p65 13/04/00, 19.454

GETTING TO KNOW THE FACSIMILE MACHINE
5
GETTING TO KNOW THE FACSIMILE MACHINE
7. Operator console
8. Print cartridge
9. Cartridge compartment lid
10. Optical reader
11. ON/OFF switch
1
2 3 4
6
7
5
10
11
8
9
COMPONENTS
KEY:
1. Paper positioning lever
2. Document feed slide
3. Paper cassette
4. Paper guides
5. Sent/copied document tray
6. Received/copied document tray
cap03.p65 13/04/00, 19.505

GETTING TO KNOW THE FACSIMILE MACHINE
6
CONSOLE
The operator console has an alphanumeric liquid crystal display, keys and LEDs that indicate the operating
modes and provide a user-friendly interface with the machine.
AbriefdescriptionofthekeysandLEDsisprovidedbelow.Howeachofthemisused willbeexplainedduring
the relevant operating procedures.
cap03.p65 13/04/00, 19.506

GETTING TO KNOW THE FACSIMILE MACHINE
7
ERROR
CONTRAST
RESOLUT.
To present the various features of the machine in a gradual and systematic way, the operator console has
beendividedinto twosections; each ofwhich containsabrief descriptionof the keysand otherelementsthey
contain.
-The left-hand section consists of the display, keys and LEDs.
The DISPLAY consists of two lines of 16 characters each, displays the data entered directly on the keypad
andprovidesinformationandmessagestoguideyouthroughtheoperationstobeperformed.Italsooperates
as a Clock/Calendar displaying the time automatically.
LEDs
Lights up to indicate that an error occurred during communication.
Indicates the contrast level selected:
- off: normal
- on: dark (for very light documents)
- blinking: light (for very dark documents)
Indicates the type of definition to be used when scanning the document:
- off: standard
- on: fine
- blinking: superfine or proprietary
cap03.p65 13/04/00, 19.507

GETTING TO KNOW THE FACSIMILE MACHINE
8
Indicates whether the document will be scanned in black and white or the grey
tones feature is enabled:
- off: black and white
- on: automatic text/image separation
- blinking: halftones
Tosetthegraphicdefinition(resolution,contrastandimage)ofthedocumenttobe
sent or copied, press the FUNCTION key followed by 2. (For further information,
seethe“Preparingthedocumentfortransmission/copying”sectionofthe“BEFORE
TRANSMISSION/COPYING” chapter).
When pressed in STANDBY, provides access to the functions available. The
functions are then selected by pressing the scroll or function keys described later
on.
Multi-purpose key
-startsnormaltransmissionafterthenumberhasbeendialledonthetelephone
or on the numeric keypad.
-activates manual reception
-activates a single copying operation
-activates the menu function selected.
IMAGE
Multi-purpose key:
-stops a copying operation and interrupts printing.
-during programming, when pressed once, aborts the procedure in progress
and displays the current menu function. When pressed a second time, quits
the menu.
-when pressed during communication, interrupts the connection.
-switches off the error LED, when it has come on to indicate that an error has
occurred.
FUNCTION
START
STOP
KEYS
cap03.p65 13/04/00, 19.508

GETTING TO KNOW THE FACSIMILE MACHINE
9
-The central section consists of a number of keys, which perform a wide variety of functions.
The illustration of the section provided below is followed by a description of all the relevant functional units.
NUMERIC KEYPAD
keys 0 ÷9 including ∗∗ and #Usedfordiallingyourcorrespondent’sfacsimileortelephonenumberand
entering data.
keys 0 ÷9 Used together with the SPEED DIAL key to dial a coded speed dialling
number.
∗∗ key Can be used while entering a number to switch to tone dialling
ONE-TOUCH DIALLING KEYS
keys 0 ÷9 including ∗∗ and #Usedforautomaticallydiallingyourcorrespondent’sfacsimileortelephone
number
<
DIAL
and keys A ÷D once they have been stored.
DIALLING, CURSOR AND MENU SCROLL KEYS
DIALLING
-with the document inserted in the ADF (Automatic Document Feeder),
enables you to dial the facsimile number on the numeric keypad.
-during data entry, moves the cursor to the left.
cap03.p65 13/04/00, 19.509

GETTING TO KNOW THE FACSIMILE MACHINE
10
>
HOOK
∨∨
REDIAL
-used for moving cyclically through the functions of a menu or the options of
each function. (Indicated on the display by the symbol “∧”).
-used, in some functions, for running through the character set table.
REDIAL
Redials the last number dialled on the numeric keypad;
-used for moving cyclically through the functions of a menu or the options of
each function. (Indicated on the display by the symbol “∨”).
-used, in some functions, for running through the character set table.
HOOK
Enables connection to the telephone line and the dialling tone to be heard
(handsfree dialling).
-during data entry, moves the cursor to the right.
-used in some cases for displaying the options of some functions on a menu.
-used in some functions for confirming the alphanumeric character selected.
KEYS FOR SELECTING, CONFIRMING AND CLEARING DATA
HOLD
-Sets the line on hold during a telephone conversation
SET/CONFIRM
Confirms the data entered.
EXTERNAL
-Must be pressed before dialling or storing an external number when the
facsimile machine is connected to a private exchange (PBX).
PAUSE
-Inserts a pause between the digits forming a facsimile or telephone number.
SET/CONF.
AHOLD
∧∧
BEXT./
PAUSE
SPEED
DIAL
cap03.p65 13/04/00, 19.5010