Olympus DCN Series User manual

Installaon Instrucons Page 1
DCN Series
Installaon instrucons for DCN series cam lock
Title
Series
DCN
Barrel Length
See Chart
Bolt type
Cam Lock
Mounting
Surface
Revision Date
11/2012
Cam Lock Dimensions
Mounng Cutout
Lipped/
Overlay
Overlay Flush
For Mat.
Thickness
Straight
Cam (X)
Inbent
Cam (Y)
Outbent
Cam (Z)
Cylinder
Length (A)
DCN1 3/4" 1-1/16" 3/4" 1-3/8" 1"
DCN2 7/8" 1-3/16" 7/8" 1-1/2" 1-1/8"
DCN3 1-1/8" 1-7/16" 1-1/8" 1-3/4" 1-3/8"
DCN4 1-1/2" 1-13/16" 1-1/2" 2-1/8" 1-3/4"

Installaon Instrucons Page 2
Installaon instrucons for DCN series cam lock
Title
Series
DCN
Barrel Length
See Chart
Bolt type
Cam Lock
Mounting
Surface
Revision Date
11/2012
DCN
Reversible
cam stop
Outer cam
driver
Hole
position
Reversible
cam stop
Outer cam
driver Hole
position
Function:
left-hand door,
vertical drawer
Function:
right-hand door,
vertical drawer
Cam installation:
Place pin of reversible cam stop in hole #1.
Place cam as pictured above. Assemble outer
cam driver so that the pin from the cam is to
left of the “ears.” Screw in cam screw until tight.
Cam installation:
Place pin of reversible cam stop in
hole #2. Place cam as pictured above.
Assemble outer cam driver so that the
pin from the cam is to right of the“ears.”
Screw in cam screw until tight.
All below congurations can be used with straight cam
or oset cam (in either the inbent or outbent position).
Rear view
Rear view
360° key rotation
Key removable at cam
positions 9:00 and 12:00
DOOR
DRAWER
DOOR
DRAWER
360° key rotation
Key removable at cam
positions 12:00 and 3:00

Installaon Instrucons Page 3
Installaon instrucons for DCN series cam lock
Title
Series
DCN
Barrel Length
See Chart
Bolt type
Cam Lock
Mounting
Surface
Revision Date
11/2012
DCN
Reversible
cam stop
Outer cam
driver
Hole
position
Function:
right-hand door,
inverted drawer
Function:
left-hand door,
inverted drawer
Cam installation:
Place pin of reversible cam stop in
hole #1. Place cam as pictured above.
Assemble outer cam driver so that the
pin from the cam is to right of the“ears.”
Screw in cam screw until tight.
Cam installation:
Place pin of reversible cam stop in
hole #2. Place cam as pictured above.
Assemble outer cam driver so that the
pin from the cam is to left of the “ears.”
Screw in cam screw until tight.
Reversible
cam stop
Outer cam
driver
Hole
position
All below congurations can be used with straight cam or
oset cam (in either the inbent or outbent position).
Rear view
Rear view
DOOR
DRAWER
360° key rotation
Key removable at cam
positions 6:00 and 9:00
DOOR
DRAWER
360° key rotation
Key removable at cam
positions 3:00 and 6:00