Olympus DS-7000 User manual

DIGITAL VOICE RECORDER
DS-7000
ENGLISH ....................................................... 2
ČEŠTINA ........................................................20
DANSK ...........................................................38
DEUTSCH ......................................................56
ESPAÑOL ...................................................... 74
FRANÇAIS ..................................................... 92
NEDERLANDS ........................................... 110
POLSKI ......................................................... 128
РУССКИЙ ....................................................146
SVENSKA ....................................................164
INSTRUCTIONS

2
EN CS DA DE ES FR NL PL RU SV
• Thank you for purchasing an
Olympus Digital Voice Recorder.
Please read these instructions
for information about using the
product correctly and safely. Keep
the instructions handy for future
reference. To ensure successful
recordings, we recommend that
you test the record function and
volume before use.
• This manual is a basic version.
For further details, a complete
advanced version of the manual*
(PDF format) is available for
download at the OLYMPUS website.
*Available in English, French or
German.
• The contents of this document may
be changed in the future without
advanced notice. Contact our
Customer Support Center for the
latest information relating to product
names and model numbers.
• The illustration of the screen and the
recorder shown in this manual may
differ from the actual product. The
utmost care has been taken to ensure
the integrity of this document, but if
you find a questionable item, error
or omission, please contact our
Customer Support Center.
• Any liability for passive damages or
damage of any kind occurred due
to data loss incurred by a defect of
the product, repair performed by the
third party other than Olympus or an
Olympus authorized service station,
or any other reason is excluded.
Trademarks and registered
trademarks
• Microsoft and Windows are
registered trademarks of Microsoft
Corporation.
• Macintosh is a trademark of Apple
Inc.
• Intel is the registered trademark of
Intel Corporation.
• SD and microSD are the trademarks
of SD Card Association.
• SDHC and microSDHC are the
trademarks of SD Card Association.
Other product and brand names
mentioned herein may be the
trademarks or registered trademarks
of their respective owners.
Introduction
EN
Safety precautions
Before using your new recorder,
read this manual carefully to
ensure that you know how to
operate it safely and correctly.
Keep this manual in an easily
accessible location for future
reference.
• The warning symbols indicate
important safety related
information. To protect yourself
and others from personal injury or
damage to property, it is essential
that you always read the warnings
and information provided.
• This manual shows the English on
screen display in the illustrations
and explanations. You can select the
display language for this recorder.
For details, see“Language(Lang)”.
Caution for usage environment
• To protect the high-precision
technology contained in this
product, never leave the recorder in
the places listed below, no matter if
in use or storage:
− Places where temperatures
and/or humidity are high or go
through extreme changes. Direct
sunlight, beaches, locked cars, or
near other heat sources (stove,
radiator, etc.) or humidifiers.
− Near flammable items or
explosives.
− In wet places, such as bathrooms
or in the rain.
− In places prone to strong vibrations.
• Never drop the recorder or subject
it to severe shocks or vibrations.
• The recorder may malfunction if it is
used in a location where it is subject
to a magnetic/electromagnetic
field, radio waves, or high voltage,
such as near a TV set, microwave,
video game, loud speakers, large
monitor unit, TV/radio tower, or
transmission towers. In such cases,
turn the recorder off and on again
before further operation.
• Avoid recording or playing back
near cellular phones or other
wireless equipment, as they may
cause interference and noise. If you
experience noise, move to another
place, or move the recorder further
away from such equipment.
• Do not use organic solvents such as
alcohol and lacquer thinner to clean
the unit.
Warning regarding data loss:
• Recorded content in memory may
be destroyed or erased by operating
mistakes, unit malfunction, or during
repair work. It is recommended to
back up and save important content
to other media such as a computer
hard disk.
• Any liability for passive damages or
damage of any kind occurred due to
data loss incurred by a defect of the
product, repair performed by the
third party other than Olympus, an
Olympus authorized service station
or any other reason is excluded
from the Olympus liability.
fDanger
If the product is used without
observing the information given
under this symbol, serious injury
or death may result.
fWarning
If the product is used without
observing the information given
under this symbol, injury or
death may result.
fCaution
If the product is used without
observing the information
given under this symbol, minor
personal injury, damage to the
equipment, or loss of valuable
data may result.
Convention used in this manual
• The word “card”is used to refer to
the SD card and microSD card.
• The word “ODMS”is used to
refer to the Olympus Dictation
Management System in Windows
environment.
• The word “DSS Player” is used to
refer to the DSS Player for Mac in
Apple Macintosh environment.
For customers who purchased
DS-7000 Standard version:
• DS-7000 Standard comes bundled
with different accessories from the
DS-7000 version.
If you need accessories not included,
purchase them separately.

3
EN CS DA DE ES FR NL PL RU SV
Handling the recorder
fWarning:
• Keep the recorder out of the reach
of children and infants to prevent
the following dangerous situation
that could cause serious injury:
1Accidentally swallowing the
battery, cards or other small
parts.
2Accidentally being injured
by the moving parts of the
recorder.
• Do not disassemble, repair or
modify the unit yourself.
• Use SD/SDHC, microSD/microSDHC
memory cards only. Never use other
types of cards.
If you accidentally insert another
type of card into the recorder,
contact an authorized distributor
or service center. Do not try to
remove the card by force.
• Do not operate the unit while
operating a vehicle.
fCaution:
• Stop using the recorder immediately
if you notice any unusual odors,
noise, or smoke around it.
Never remove the battery with
bare hands, which may cause a
fire or burn your hands.
• Do not leave the recorder in
places where it may be subject to
extremely high temperatures.
Doing so may cause parts
to deteriorate and, in some
circumstances, cause the
recorder to catch fire. Do not
use the charger or AC adapter
if it is covered. This could cause
overheating, resulting in fire.
• Handle the recorder with care to
avoid getting a low-temperature
burn.
− When the recorder contains
metal parts, overheating can
result in a low-temperature burn.
Pay attention to the following:
− When used for a long period, the
recorder will get hot. If you hold on
to the recorder in this state, a low-
temperature burn may be caused.
− In places subject to extremely cold
temperatures, the temperature
of the recorder’s body may be
lower than the environmental
temperature. If possible, wear
gloves when handling the
recorder in cold temperatures.
Battery handling precautions
fDanger:
• The recorder uses a special lithium
ion battery from Olympus. Charge
the battery with the specified AC
adapter or charger. Do not use any
other AC adapters or chargers.
• The battery should never be
exposed to flame, heated, short-
circuited or disassembled.
• Never heat or incinerate battery.
• Take precautions when carrying or
storing batteries to prevent them
from coming into contact with any
metal objects such as jewelry, pins,
fasteners, etc.
• To prevent causing battery leaks or
damaging their terminals, carefully
follow all instructions regarding the
use of batteries. Never attempt to
disassemble a battery or modify it
in any way, solder, etc.
• If battery fluid gets into your eyes,
flush your eyes immediately with
clear, cold running water and seek
medical attention immediately.
fWarning:
• Keep batteries dry at all times.
• If rechargeable batteries have not
been recharged within the specified
time, stop charging them and do
not use them.
• Do not use a battery if it is cracked
or broken.
• Never subject batteries to strong
shocks or continuous vibration.
• If a battery leaks, becomes
discolored or deformed, or becomes
abnormal in any other way during
operation, stop using the recorder.
• If a battery leaks fluid onto your
clothing or skin, remove the
clothing and flush the affected
area with clean, running cold water
immediately. If the fluid burns
your skin, seek medical attention
immediately.
• Keep batteries out of the reach of
children.
• If you notice anything unusual
when using this product such as
abnormal noise, heat, smoke, or a
burning odor:
1remove the battery immediately
while being careful not to burn
yourself, and;
2call your dealer or local Olympus
representative for service.
fCaution:
• The bundled/included rechargeable
battery is exclusively for use with
Olympus digital voice recorder DS-
7000.
− There is a risk of explosion if
the battery is replaced with the
incorrect battery type.
− Dispose of the used battery
following the instructions.
− Please recycle batteries to help
save our planet’s resources.
When you throw away dead
batteries, be sure to cover their
terminals and always observe
local laws and regulations.
• Always charge a rechargeable
battery when using it for the first
time, or if it has not been used for a
long period.
• Rechargeable batteries have limited
lifetime. When the operating
time becomes shorter even if
the rechargeable battery is fully
charged, replace it with a new one.
Docking station
fDanger:
• Never disconnect the AC adapter
or power cord with a wet hand. This
may cause electric shock or injury.
• Only use the dedicated AC adapter
with the docking station. Using
it in combination with other AC
adapters may cause overheating,
fire, or malfunction.
fWarning:
• Never disassemble, modify, or repair
the docking station yourself.This may
cause fire, electric shock, or injury.
• Never use the docking station in
locations where it might come into
contact with liquids. Getting the
docking station wet may cause fire
or electric shock.
• Do not drop the docking station or
allow it to suffer extreme shocks.
This may cause damage, or fire or
electric shock.
• Do not touch the connector or
insert the metal wires or similar
object into any of the plugs. This
may cause fire, or electric shock.

4
EN CS DA DE ES FR NL PL RU SV
fCaution:
• Unplug the AC adapter or power
cord from the docking station
and AC outlet when not using for
extended periods of time. If this
precaution is not followed and the
docking station is damaged then
fire may occur.
AC adapter
fDanger:
• Be sure to use the AC adapter with
the proper voltage (AC 100 - 240
V). Using it with other voltage
levels may cause fire, explosion,
overheating, electric shock or injury.
• For safety, be sure to unplug
the AC adapter from the outlet
before performing maintenance
or cleaning. Also, never plug in or
disconnect the power plug with a
wet hand. This may cause electric
shock or injury.
fWarning:
• Do not attempt to disassemble,
repair or modify the AC adapter in
any way.
• Keep foreign objects including
water, metal, or flammable
substances from getting inside the
product.
• Do not moisten the AC adapter or
touch it with a wet hand.
• Do not use the AC adapter in the
vicinity of flammable gas (including
gasoline, benzine and lacquer
thinner).
• Always stop recording before
connecting or disconnecting the
power supply plug.
• When the AC adapter is not in use,
disconnect the power supply plug
from the power outlet.
• Use only power supply of the
correct voltage, as indicated on the
adapter.
In case:
• ... the internal parts of the AC
adapter are exposed because it
has been dropped or otherwise
damaged:
• ... the AC adapter is dropped in
water, or if water, metal flammable
substances or other foreign objects
get inside it:
• ... you notice anything unusual
when using the AC adapter such as
abnormal noise, heat, smoke, or a
burning odor:
1do not touch any of the exposed
parts;
2immediately disconnect the
power supply plug from the
power outlet, and;
3call your dealer or local Olympus
representative for servicing.
Continued use of the AC adapter
under these circumstances could
result in electric shock, fire or
injury.
fCaution:
• Do not use the AC adapter if the
power plug is damaged or the
plug is not completely connected
to the outlet. This may cause fire,
overheating, electric shock, short
circuit or damage.
• Unplug the AC Adapter from
AC outlet when not using. If this
precaution is not followed, fire,
overheating or electric shock may
occur.
• Make sure to hold the plug when
removing the power plug from
the outlet. Do not bend the cord
excessively or put heavy objects on
it. This may cause fire, overheating,
electric shock or damage.
LCD monitor
• The LCD used for the monitor
is made with high-precision
technology. However, black spots
or bright spots of light may appear
on the LCD Monitor. Due to its
characteristics or the angle at which
you are viewing the monitor,
the spot may not be uniform in
color and brightness. This is not a
malfunction.
Memory Card
fWarning:
• Do not touch the card contacts. This
may damage the card.
• Do not place the card in locations
with static electricity.
• Store the card in a location that is
out of the reach of children. In case
of accidental ingestion, consult a
physician immediately.
Getting started
Identification of parts
6
7
$
1
2
3
4
!
8
9
5
@
0
)(*
&
^%
-
#
1SD card slot
2Built-in microphone
3 NEW button
4Slide ( REC / STOP / PLAY / REV )
switch
5 ERASE button
6Record indicator light
7Display (LCD panel)
8 + (Volume) button
9Fast Forward (9) button
0 OK/MENU button
!Programmable smart
( F1 , F2 , F3 ) buttons
@Rewind (0) button
# – (Volume) button
$Built-in speaker
%Battery cover
^Battery cover release
button

5
EN CS DA DE ES FR NL PL RU SV
Display status indicators (LCD panel)
Inserting the battery
This recorder uses a lithium ion
battery specified by Olympus (LI-42B).
Do not use any other type of battery.
1 Lightly press down on the battery
cover release button, then open
the battery cover, as shown in the
illustration below.
0
!
#
@
%
$
1
29
4
5
6
7
8
3
Display in the recording mode
Display in the playback mode
1Current file name
2Current folder
3 Current file number/ Total
number of recorded files in
the folder
4Recording elapsed time
5Remaining memory bar
indicator
6Remaining recording time
7Level meter indicator
8Button guide display
9Recorder status indicator
0Current playback time
!Index mark indicator
@Playback position bar
indicator
#Verbal comment indicator
$File length
%Recording date and time
^Slide switch guide
You can display the slide switch
guide by using“Slide switch
guide”of the customize functions
of ODMS software.
&File information area
Current file’s information can be
displayed by using the“Display”
function in the ODMS software.
[ ]: SD card
[ ]: SD Card lock
[ ]: microSD card
[ ]: Microphone
sensitivity
[ ]: Recording mode
[ ]: Battery
[ ]: VCVA (Variable
Control Voice Actuator)
[ ]: Pending
[ ]: Encryption
[ ]: Priority
[ ]: File lock
[ ]: Author ID
[ ]: Work Type
[ ]: Option Item
2Insert the battery observing the
correct polarity as shown in the
illustration, then close the battery
cover.
• Insert the battery by sliding in
direction Awhile pushing down
in direction B.
Battery indicator:
The battery indicator on the display
will decrease as the battery loses
power.
• When this [ ] indicator appears
on the display, charge the battery
as soon as possible. When the
battery is too weak, [
s] and
[Battery Low] will appear on the
display and the recorder will shut
down.
Notes:
• Turn off the recorder before
removing the battery. Removing
the battery while the recorder is still
in use may cause malfunctions, file
corruption or file loss.
• Remove the battery if you are not
going to use the recorder for an
extended period of time.
• After removing the battery, it may
become necessary to re-set the
time and date if you leave the
battery out of the recorder for more
than 15 minutes or if you remove
the battery right after loading it into
the recorder.
^
&
Display in the recording mode
& POWER ( ON / OFF ) switch
* EAR (Earphone) jack
( MIC (Microphone) jack
)USB connector
-Docking station connector

6
EN CS DA DE ES FR NL PL RU SV
• Charging the battery via the USB
cable connection may not be
successful depending on the power
capacity of the USB port in your PC.
Use the AC adapter instead.
• Do not set or remove the recorder
from the docking station while
operating.
• Do not charge the recorder through
a USB hub.
• Do not attach or remove the battery
if the USB cable is connected.
Using the lithium ion battery
The included battery is exclusively for
use with the Olympus voice recorder
DS-7000. Do not use in combination
with other electronic equipment.
Cautions concerning the battery:
Read the following instructions
carefully when you use the battery.
Discharging:
Rechargeable batteries self-discharge
while not in use. Charge it regularly
before use.
Battery life:
Over time, the rechargeable battery
may gradually wear down. When
the operating time becomes shorter
even if the rechargeable battery is
fully charged under the specified
condition, replace it with a new one.
Operating temperature:
Rechargeable batteries are chemical
products. Battery efficiency may vary
even when operating within the
recommended temperature range.
This is an inherent nature of these
products.
Recommended temperature range
of use:
During operation:
0°C - 42°C
Charging:
5°C - 35°C
Storage for a long period:
–20°C - 60°C
Using the battery outside the above
temperature range may result in
declining efficiency and shorter
battery life.
Notes:
• When disposing the batteries,
always observe the local laws and
regulations. Contact your local
recycling center for proper disposal
methods.
Power supply from AC adapter or
USB cable
Use the AC adapter or USB cable
when recording for extended period
of time.
The "Standard" version of the DS-
7000 does not include the docking
station and the AC adapter (optional).
Using the AC adapter:
Plug the AC adapter into a household
power outlet and connect the power
plug to the recorder via the docking
station. Always turn off the recorder
before you connect power.
Detecting abnormal voltage:
If the recorder detects a DC power
voltage outside the allowed voltage
range (4.4-5.5V), then [Power
Supply Error Remove Power Plug]
will appear on the display, and all
operation will stop. The recorder will
not be operable if abnormal voltage
is detected. Use the AC adapter.
• If battery is not fully discharged,
protect it against short-circuiting
(e.g. by taping the contacts) before
disposal.
For customers in Germany:
Olympus has a contract with the GRS
(Joint Battery Disposal Association) in
Germany to ensure environmentally
friendly disposal.
Using the USB cable:
1 Verify that the recorder is in stop
mode.
2 Connect the USB cable to the
recorder while pressing the
OK/MENU button.
Charging the battery
Fully charge the battery (approx. 2
hours 30 minutes) before use.
Charging the battery using
the docking station
The "Standard" version of the
DS-7000 does not include the
docking station and the AC adapter
(optional).
Charging using docking station
and AC adapter:
1 Connect the AC adapter to the
docking station.
2 Firmly press the recorder all the way
into the docking station as shown in
the illustration.
• The CHARGE indicator light turns
on when charging starts, and turns
off when charging is complete.
Charging using docking station
and USB cable:
Connect the USB cable to the
docking station.
Charging directly via USB
cable
After loading the battery into the
recorder, you can charge it by
connecting the USB cable to the
recorder.
Notes:
• Charge the battery frequently
during the first period of use. The
battery will perform better after
several charge/discharge cycles.
• Models of batteries which are
different from the included one may
not be charged.
1
2

7
EN CS DA DE ES FR NL PL RU SV
Turning on the recorder
Move the POWER switch to [ON]
position to activate the recorder.
Memory card
This recorder uses two types of
memory cards: a microSD card
as internal memory, and an SD
card as additional memory.
You can remove the content recorded
in both the cards safely in case of
malfunction of the recorder.
Compatible cards
The recorder supports memory card
capacity from 512 MB up to 32 GB.
Cards compatibility
For a list of card compatible with the
recorder, please visit the product
homepage at the Olympus website
applicable to your region or contact
your Olympus reseller where you
purchased the product.
Notes:
• When initializing (formatting) a
card, confirm that no necessary
data is stored on the memory
card beforehand. Initialization
completely erases the existing
data on the card.
• Cards formatted (initialized) by
another device, like a computer,
may not be recognized. Be sure
to format them with this recorder
before use.
Setting time and date [Time & Date]
If you set the time and date
beforehand, the information when
the file is recorded is automatically
stored for each file. Setting the time
and date beforehand enables easier
file management.
When you use the recorder for the
first time after purchasing it, or
when the battery has been inserted
without the device being used for
a long time, the [ Set Time & Date ]
will appear.
• For further details, a complete
advanced version of the manual*
(PDF format) is available for
download at the OLYMPUS website.
* Available in English, French or
German.
1 Press the 9or 0button to
select the item to set.
Select the item from the“hour”,
“minute”, “ year”, “ month” and“day”
with a flashing point.
• The card has a service life. When
reaching the end of its life, writing
or erasing data on the card will be
disabled. In this case, replace the
card.
• If you use a PC card adapter
compatible with the card to save
or delete some data on the card,
the maximum recording time on
the card may be decreased. To
recover the original recording time,
initialize/format the card in the
recorder.
Inserting and ejecting a SD card
Inserting a SD card
Insert the SD card fully into the card
slot with the card facing the direction
shown in the illustration below, until
it clicks into place.
• Insert the card keeping it straight.
Card recognition
After inserting SD card, the message
[Please Wait] will flash on the display
while the recorder recognizes the
SD card.
Ejecting a SD card
Push the SD card inward to unlock it
and let it come out of the slot.
• Hold the card straight and pull it
out.
Notes
• Inserting the card the wrong way
or at an angle could damage the
contact area or cause the card to
jam.
• If the card is not inserted all the
way into the slot, data may not be
written properly.
• When an unformatted card is
inserted into the card slot, the
recorder will automatically display
the format menu options.
• Use only cards formatted with the
recorder.
• Never remove the card while the
recorder is operating, as this may
damage the data.
• After pushing the card inward to
eject it, releasing your finger too
quickly may cause the card to be
ejected unexpectedly.
• This recorder uses a microSD card as
internal memory. The microSD card
has been preloaded.
• The recorder may not properly
recognize the card even when that
card is compatible with it.
• The processing performance
reduces in a card when you repeat
writing and deleting. In this case,
format the card.
2 Press the + or − button to set.
You can select between 12 and
24 hour display by pressing the
F2 (24H) button while setting the
hour and minute.

8
EN CS DA DE ES FR NL PL RU SV
3Move the slide switch to the
STOP (4) position to stop
recording.
• If you want to append additional
recordings to the same file, move
the slide switch to the REC (s)
position again.
a
b
Notes:
• During recording, a beep will sound
whenever the remaining recording
time reaches 60, 30, and 10 seconds.
• When the remaining recording
time is less than 30 minutes, the
color of the remaining memory bar
indicator will change.
• When the remaining recording
time reaches 60 seconds, the record
indicator light will start flashing.
The light will flash faster when the
remaining recording time decreases
from 30 to 10 seconds.
• [Memory Full] or [Folder Full] will
be displayed when the memory or
folder capacity is full.
− Delete unnecessary files before
recording any further or transfer
dictation files to your PC.
− Change the recording media at
[Card Select] setting or change
to a card with free space.
Overwrite recording
You can overwrite a previously
recorded file starting from any
point within the file. When using
overwriting, the overwritten part will
be erased.
1Select and play the file you want to
overwrite.
• Stop the playback at the point
you want to start overwriting.
aNew file number
bRemaining recording time
2Move the slide switch to the
REC (s) position to start recording.
• The record indicator light turns
on. Turn the microphone in the
direction of the source to be
recorded.
Basic operations
Recording
By default, the recorder has five
folders, [A], [B], [C], [D], [E]
and you can select a folder by
pressing the F1 (FOLDER) button.
These five folders can be selectively
used to distinguish the kind of
recording. Up to 200 messages can be
recorded per folder.
Also, by default, the Recording Mode
is [DSS Pro QP].
3 Press the + or − button to select
[
Time & Date ].
4 Press the OK/MENU button.
• The following steps are the
same as Step 1 through Step
3 of“Setting time and date
[Time & Date]”.
5 Press the F3 ( EXIT ) button to close
the menu screen.
• You can select the order of the
“Month”, “ Day”and “Year” by
pressing the F2 (D/M/Y) button
while setting them.
3Press the OK/MENU button to
complete the setting.
Note:
• You can set the time and date from
your PC using ODMS and DSS Player
software.
Changing the time and date:
If the current time and date is not
correct, set it using the procedure
below.
1 While the recorder is in stop mode,
press the
OK/MENU button.
2 Press the 9or 0button to
select [
Device Menu ] tab.
• You can change the menu display
by moving the settings tab cursor.
Record function
Before starting recording over a
previously recorded file, the RECORD
function can be set to the following:
• Append: Attaches the new
recording to the end of the
previously recorded file.
• Overwrite (default): Overwrites
and deletes part of the previously
recorded file starting from the
chosen position.
• Insert: The recorded file will be
inserted in the middle of the
previously recorded file, starting
from the chosen recording position.
The original file will be kept.
By default, the RECORD function
is configured to record using the
overwrite option.
Recording will start from the current
position of the existing file.
New recording
Create a new file to record in.
1Press the NEW button to create a
new file.
• It is possible to select the Work
Type from the work type list
uploaded using the ODMS
software.

9
EN CS DA DE ES FR NL PL RU SV
Hands-free recording
The recorder can be used as a hands-
free recording device. To set up the
recorder for hands-free operation,
connect the optional Olympus Foot
Switch to the back of the docking
station and place the recorder in the
docking station.
• For further details, a complete
advanced version of the manual*
(PDF format) is available for
download at the OLYMPUS website.
* Available in English, French or
German.
Recording monitor
It is possible to monitor your
recording by listening to it even
while the recording is in progress. In
order to do so, insert the earphone
plug into the earphone jack and use
the + or – buttons to control the
volume level.
Playback
1Select the file, then move the slide
switch to the PLAY (`) position to
start playback.
2Press the
+ or – button to adjust
the volume.
• The volume can be adjusted
within a range from [00] to [30].
b
a
aRecording elapsed time
bTotal recording time of the
selected file
3 Move the slide switch to the
STOP (4) position to stop
overwriting.
Note:
• You cannot select a recording mode
different from the one set onto the
original file.
Insert recording
Additional recording can be inserted
into previously recorded file.
1 Select and play the file you want to
insert an additional recording into.
2 While playing the file, press the
F1 ( INSERT ) button to insert an
additional recording.
• [Insert Rec?] will appear on the
display.
3 Move the slide switch to the
REC (s) position to start inserting
the additional recording.
• The record indicator light
turns on. [Insert Rec] and the
remaining recording time will
alternate on the display.
4 Move the slide switch to the
STOP (4) position to stop inserting
the additional recording.
Notes:
• The recording’s time and date will
be updated to the one of the latest
recording inserted.
• You cannot select a recording mode
different from the one set onto the
original file.
2 Move the slide switch to the
REC (s) position to start
overwriting.
• The record indicator light turns on.
3Move the slide switch to the
STOP (4) position at any point you
want to stop the playback.
Fast Forward (FF):
• Press the 9button once while in
stop mode.
Rewind (REW):
• Press the 0button once while in
stop mode.
How to cancel: Move the slide switch
to a position other than the STOP (4)
position.
• The recorder starts the operation
of the set position.
Press the OK/MENU button.
Cue (Cue):
• Press and hold the 9button while
in stop or playback mode.
How to cancel: Release the button.
Review (Rev):
• Press and hold the 0button while
in stop or playback mode.
How to cancel: Release the button.
• Move the slide switch to the REV
(7) position.
How to cancel: Release the slide
switch.
Playback Speed
• Press the F2 (SPEED) button during
playback.
• The playback speed will change
at each press of the F2 (SPEED)
button.
Play (playback):
Playback at normal speed.
Slow Play (slow playback):
Playback speed slows down
(-50%), and“Slow play”will be
displayed.

10
EN CS DA DE ES FR NL PL RU SV
3In the position you want to end
partial erase, press the
ERASE
button again.
• The erase starting point (time)
set in step 2 and the ending
point (time) set in this step will
be displayed alternatively for 8
seconds.
• If you let the playback continue
until the end of the file, or in
case of a Verbal comment before
it, that will be considered the
ending point of the partial erase.
Playback will continue until the
end of the file or until the partial
erase ending point is confirmed.
5Press the + button to select
[ Start ], then press the OK/MENU
button.
• The display changes to [Erase !]
and erasing will start.
4Press the OK/MENU button.
Erasing
Erasing files:
1Select the file you want to erase.
2Press the ERASE button.
Fast Play (fast playback):
Playback speed becomes faster
(+50%), and“Fast play” will be
displayed.
Notes:
• If you press the 9button once
while fast-forwarding or twice while
in stop mode, the recorder will stop
at the end of the file (F.Skip).
• If you press the 0button once
while rewinding or twice while in
stop mode, the recorder will stop at
the beginning of the file (B.Skip). If
the 0button is pressed within 2
seconds, the recorder skips to the
beginning of the previous file.
• If you press and hold the 9
button while fast forwarding (FF),
the recorder will continue to skip
forward.
• If you press and hold the 0
button while rewinding (REW),
the recorder will continue to skip
backward.
• The Cue and Review speed can be
set from [Speed1] to [Speed5]. Cue
and Review playback sound can be
set to [On] or [Off].
3Press the + button to select
[
Erase in Folder ] or [ File
Erase
].
[Erase in Folder]:
All files in a folder can be erased
simultaneously.
[File Erase]:
Erase one file.
• [Erase Done] is displayed when
the file is erased. File numbers
will be reassigned automatically.
Notes:
• An erased file cannot be restored.
• The erasing process may take up to
10 seconds. Do not interrupt this
process or data may be damaged.
• Files cannot be erased in the
following cases.
- Files are locked.
- Files stored on a locked SD card.
Partially erasing a file
Any unnecessary part of a file can
be erased.
1Playback the file you would like to
partially erase.
2Press the
ERASE button at the
point you want to start erasing.
• While playback continues, [Erase
Start] will appear on the display.
• If you press the F2 ( ) button,
playback will skip (F.Skip) to the
end of the file and then stop. That
will be set automatically as the
ending point of the partial erase.
• If you press the F1 ( ) button,
playback will skip back (B. Skip)
and restart from the partial erase
starting point.
4Press the ERASE button to confirm
the erasure.
• The display changes to [Partial
erasing !] and erasing will start.
• When [Partial erase completed.]
appears on the display, partial
erase is complete.
Notes
• If the ERASE button is not
pressed within 8 seconds after the
[Start point] and [End point] are
alternately displayed, the recorder
will revert to stop status.
• An erased file cannot be restored.
• The erasing process may take up to
10 seconds. Do not interrupt this
process or data may be damaged.

11
EN CS DA DE ES FR NL PL RU SV
Setting the Author ID and WorkType
Every file recorded on the recorder
will include the Author ID and Work
Type as part of its header information.
To create multiple Author IDs and
Work Types on the recorder, use the
bundled ODMS software to create
and upload a data list (list of Author
IDs and Work Types) to the recorder.
For more details, refer to the online
help for ODMS software.
By default the Author ID is set to
“DS7000”.
Verbal Comment
Verbal comments are useful to
append vocal instructions while
recording.
It is possible to search and playback
Verbal comments using the ODMS
and DSS Player software. Verbal
comments are also useful to give
instructions to transcriptionists.
Setting a Verbal Comment
1While the recorder is in recording
mode, press and hold the
F1
(
VERBAL ) button.
• Data recorded while pressing
the F1 (VERBAL) button will be
recorded as Verbal Comment.
Index marks
Index marks can be placed into a file
during recording or playback. Index
marks are used to provide a quick
and easy way to identify important or
significant parts within the file.
Setting an index mark
1While the recorder is in recording
mode or in playback mode, press the
F3 (INDEX) button.
Advanced operations
Selecting folders and files
Changing folders:
1While the recorder is in stop mode,
press the
F1 ( FOLDER ) button.
• The folder list screen will be
displayed.
2Press the + , – or F1 ( FOLDER )
button to select the folder, then
press the
OK/MENU button.
b
a
Selecting a file:
1While the file is being displayed,
press the 9, 0button.
aTotal number of recorded files in
the folder
bCurrent file number
a
Locating a Verbal Comment
2When playing back a file, press and
hold the 9or 0button.
• The recorder stops for 1 second
when it reaches the Verbal
Comment.
• The verbal comment part has a
different color.
Displaying file information
The recorder can display a variety of
information related to the current
file.
1Select the file containing the
information to display.
Device lock function
Access to the recorder can be
restricted by using the Device Lock
function. Password authentication
can be safer for your data in case the
recorder is lost.
The password can be set by using the
ODMS software.
aVerbal Comment part
Clearing a Verbal Comment
1When playing a Verbal Comment,
press the
ERASE button.
2Press the + button to select
[
Clear ], then press the OK/MENU
button.
Notes:
• Up to 32 Verbal comments can be
set within a file.
• When a file is locked or set to read-
only, or when the SD card is locked,
Verbal comments cannot be erased.
• When the recorder has been set to
DSS Classic mode, it is not possible
to record Verbal Comments.
• Files cannot be partially erased in
the following cases.
- Files are locked.
- Partial erasing is not possible
on parts of files with a Verbal
comment on them.
- Files are inside a locked SD card.
2Press the F3 ( INFO ) button.
• The following information will
be displayed:
[Date] [Author ID] [Work Type]

12
EN CS DA DE ES FR NL PL RU SV
Menu items
File Menu
Priority:
By default, the F2 button is
programmed with the Priority
function. The setting can also be
performed from the menu.
You can set a priority level on each
file recorded. You can select “High”or
“Normal”. The default is Normal level.
[Set]:
High level.
[Cancel]:
Normal level.
• Each time the F2 (PRIORITY) button
is pressed the Priority level will
change (High/Normal).
Pending:
When you set [Pending] to the file,
the file becomes“Pending file”. If
“Download file” is set to“Finished file”
by ODMS software, the [Pending] file
is not transferred and only [Finished]
file (edited file) will be transferred
to your PC.
[Pending]:
Sets to a file of“Editing”and [ ]
will appear on the display.
[Finished]:
Sets to a file of“already edited”.
File Lock:
The File lock function allows you to
prevent important files from being
accidentally erased.
[On]:
Locks the file and prevents it from
being erased.
[] will appear on the display.
[Off]:
Unlocks the file and allows it to be
erased.
2Press the 9or 0button to
move to the tab that contains the
item you want to set.
• You can change the menu display
by moving the settings tab cursor.
3Press the + or − button to move to
the item you want to set.
• Move to the menu item you want
to set.
4Press the OK/MENU button.
• Move to the setting of the
selected item.
5Press the + or – button to change
the setting.
• Pressing the 0button without
pressing the OK/MENU button
will cancel the settings and return
you to the previous screen.
6Press the OK/MENU button to
complete the setting.
• You will be informed that the
settings have been established
via the screen.
7Press the F3 (EXIT) button to close
the menu screen.
How to use the menu
Items in menus are categorized by
tabs, so select a tab first and move to
a desired item to quickly set it. You
can set each menu item as follows.
1, 4, 6
7
2
3, 5
1, 4 , 6
7
2
3, 5
1While the recorder is in stop mode,
press the
OK/MENU button.
• The menu will appear on the
display.
Locating an index mark
2While playing back a file, press and
hold the 9or 0button.
• The recorder stops for 1 second
when it reaches the index mark.
Clearing an index mark
1Select a file in which index marks
you want to erase are contained.
2Press the 9or 0button to
select the index mark to erase.
3While the index number appears
for approximately 2 seconds on the
display, press the
ERASE button.
• The index mark is erased.
Notes:
• Up to 32 index marks can be set
within a file.
• When a file is locked or set to read-
only, or when the SD card is locked,
index mark cannot be erased.
• If the recorder has been set to DSS
Classic mode, index marks are
limited to a maximum of 16 for each
file.

13
EN CS DA DE ES FR NL PL RU SV
Rec Menu
Mic Sense:
You can switch between two
microphone sensitivities to meet
recording needs: [Dictation] for oral
dictation and [Conference] which
is suited for situations like meetings
and conferences with a small number
of people.
[Conference]:
High-sensitivity mode that records
sounds in all directions.
[Dictation]:
Low-sensitivity mode suited for
dictation.
• The setting status will appear on
the display as [ ] or [ ].
Rec Mode:
The recording mode can be set to
[DSS Pro QP] (Quality Playback) or
[DSS Pro SP] (Standard Playback).
• You cannot select the [DSS Pro QP]
mode when setting the recorder to
the DSS Classic mode.
For details, see“Recording”in the
“Customizing the recorder”.
VCVA:
The VCVA feature extends recording
time and conserves memory by
stopping recording during silent
periods, which helps the playback
to be more efficient. When the
microphone senses that sounds
have reached a preset threshold
volume level, the built-in Variable
Control Voice Actuator (VCVA) starts
recording automatically, and stops
when the volume drops below the
threshold level.
LCD/Sound Menu
Backlight:
By default, the display will remain lit
for about 10 seconds when a button
on the recorder is pressed.
1Select [ Lighting Time ], [ Dim
Light Time ] or [ Brightness ].
2Select the options.
When [Lighting Time] is selected:
[5seconds] [10seconds] [30seconds]
[1minute]:
Set the backlight duration.
When [Dim Light Time] is
selected:
[30seconds] [1minute] [2minutes]
[5minutes]
[Always On]:
Set the time after which the
backlight dims.
When [Brightness] is selected:
[01] [02] [03]:
Sets the brightness of the
backlight when lit.
LED:
You can set it so the record indicator
light does not turn on.
[On]:
LED light will be set.
[Off]:
LED light will be canceled.
Beep:
When the Beep is set to [On], the
recorder will beep in case of error.
[On]:
Beep is enabled.
[Off]:
Beep is disabled.
Language (Lang):
You can set the language for the
recorder’s user interface.
[Čeština] [Dansk] [Deutsch]
[English] [Español] [Français]
[Nederlands] [Polski] [Русский]
[Svenska]:
• The languages available may vary
depending on the country/region
where the product is purchased.
c
1Select [ On ].
2Move the slide switch to the
REC (s) position to start recording.
• When the sound volume is lower
than the preset actuation sound
level, recording automatically
stops after 1 second
approximately, and [Standby]
flashes on the display. The record
indicator light turns on when
recording starts and flashes when
recording pauses.
aVCVA indicator
bLevel meter (varies according
to the sound volume being
recorded)
Adjust the start/stop actuation
level:
While the recorder is in recording
mode, press the 9or 0button
to adjust the actuation level.
• The VCVA level can be set to any of
15 different values.
• The higher the value is, the more
sensitive the recorder can react to
sounds. At the highest value, even
the faintest sound will activate
recording.
• The VCVA actuation level can be
adjusted according to the ambient
(background) noise.
Work Type:
The Work Type information of the
recorded or uploaded files can be
edited with the menu settings of the
recorder.
• For further details, a complete
advanced version of the manual*
(PDF format) is available for
download at the OLYMPUS website.
*Available in English, French or
German.
Information:
The recorder can display a variety of
information related to the current file.
CStart level (moves to the right/
left according to the set level)
• The start/stop actuation level also
varies depending on the selected
microphone sensitivity mode.
a
b
• To ensure successful recordings, prior
testing and adjustment of the start/
stop actuation level is recommended.

14
EN CS DA DE ES FR NL PL RU SV
Formatting the card [Format]
Cards that have been used in non-
Olympus devices, or cards that are
not recognized by the recorder, must
be formatted before they can be used
with the recorder.
1Select [ Format ] at the [ Device
Menu
] screen, then press the
OK/MENU button.
3Press the
+ or – button to select
[
Start ] option.
2Press the + or – button to select
[
SD Card ] or [ microSD Card ],
then press the
OK/MENU button.
4Press the OK/MENU button to
confirm [
Start ] selection.
5Press the + or – button again to
select [
Start ] option.
6Press the
OK/MENU button again
to initiate the formatting process.
• [Format Done] displays when
formatting ends.
Notes:
• The time required to format a card
varies according to the capacity of
the card to be formatted.
Do not interrupt the formatting
process with the following actions.
Doing so may damage the data or
the card.
- Remove the card.
- Remove the battery.
• Formatting the card will erase all
the stored data, including locked
files.
• When an unformatted card is
inserted, the format menu will be
displayed automatically.
connected via USB in [Composite],
the recorder can be used as the USB
speaker and the USB microphone in
addition to storage class.
[Storage Class]:
USB connection is possible in only
storage class.
Reset Settings:
To reset the menu settings to their
default values use [Reset Settings]
under [Device Menu], or use the
ODMS and DSS Player software.
Format:
Cards that have been used in non-
Olympus devices, or cards that are
not recognized by the recorder, must
be formatted before they can be used
with the recorder.
• Formatting the card will erase all
the stored data, including locked
files.
For details, see“Formatting the card
[Format]”.
Card Information:
Memory card capacity and remaining
card space for the cards in use will be
displayed on the recorder.
System Information:
System information about the
recorder like the [Model], [Version]
and [Serial No.] can be displayed.
• For further details, a complete
advanced version of the manual*
(PDF format) is available for
download at the OLYMPUS website.
* Available in English, French or
German.
Device Menu
Card Select:
By default, the recording media is set
to [SD Card] by the manufacturer.
• The recording media ([ ] or [ ])
will appear on the display.
Cue/Rev:
The playback sound of Cue and
Review operation and Cue and
Review speed can be set.
1Select [ Sound ] or [ Speed ].
[Sound]:
Set the playback sound of Cue
and Review to On or Off.
[Speed]:
Set the Cue and Review speed.
2Select the options.
When [Sound] is selected:
[On]:
Activate the playback sound of
Cue and Review.
[Off]:
Disables this function.
When [Speed] is selected:
You can adjust the Cue and
Review speed level from
[Speed 1] to [Speed 5].
• Cue and Review speed level
becomes faster as the numerical
value becomes larger.
Power Save:
By default, the recorder will enter
into Power Save mode if not used for
more than 10 minutes.
[5minutes] [10minutes] [30minutes]
[1hour]:
Set the length of time before the
recorder will enter into Power Save
mode.
[Off]: Disables this function.
• If any button is pressed, time count
will restart.
Time & Date:
Setting the time and date beforehand
enables easier file management.
For details, see“Setting time and
date [Time & Date]”.
USB Class:
You can set the USB class of this
recorder with a USB connection to
[Composite] or [Storage Class].
[Composite]:
In the 3 classes of Storage, USB
audio and human interface device,
USB connection is possible. While

15
EN CS DA DE ES FR NL PL RU SV
Customizing the recorder
You can customize various settings
of the recorder using the ODMS
software.
For more details, refer to the online
help for ODMS software.
Common settings:
You can set the default values for
each of the recorder’s Menu items.
Administrative settings:
❏General
Accessibility:
• You can customize / adjust / set /
configure various settings related
to user authorization, such as
prohibiting both file erasure and
Menu settings.
Splash Message:
• You can set the contents that appear
in the message which is displayed
during start-up.
Slide Switch Guide:
• You can set the Slide Switch Guide,
which indicates the position of the
Slide Switch on the display, to either
enabled or disabled.
Alarm:
• You can set occasions for the
recorder’s alarm or beep noise to
sound.
❏ Display
• You can select a default pattern for
display from 4 patterns.
• The way information is displayed on
the LCD display can be customized
for three different areas.
– The upper part of the screen
displays the recorder's basic
functions.
− The lower part of the screen can
be used to display information
on the file actually selected, like
Author ID, Work Type and Option
Item.
− The right part of the screen can
be used to display the Slide
Switch Guide indicators.
❏Device Security
You can customize / adjust / set /
configure various settings related to
the recorder’s device lock function.
PIN code:
• Password setting.
Device Lock:
• Device lock function On/Off.
• Settings related to the timing for
setting the device lock.
• Changing the number of allowable
input errors (mismatches) for the
password.
❏Author List
You can customize / adjust / set /
configure settings related to the
Author.
Author List:
• Register multiple Author IDs (up to
max. 10 items).
• Set the priority level for each Author
ID.
• Select the Author ID you want to be
used by default.
Author Selection:
• Choose to activate/deactivate the
Author ID selection at the recorder
start-up.
❏ Work Type List
You can customize / adjust / set /
configure settings related to the
Work Type.
Work Type List:
• Register Work Types (up to max. 20
items).
• Set the option items for each Work
Type (up to max.10 options).
• Select the Work Type you want to be
used by default.
Worktype Selection:
• Choose to activate/deactivate the
Work Type selection when the
recorder is iv New mode.
❏Device Folders
You can customize / adjust / set /
configure various settings related to
the recorder’s folders.
Enabled:
• Change the number of usable
folders.
Folder name:
• Change the folder name.
Worktype:
• Set the folder's work type.
AutoLock:
• Set the Auto Lock on a file to On/Off.
Encryption:
• Select a folder’s Encryption level.
It is possible to set the Encryption
level to [High] (256 bit), [Standard]
(128 bit) or [No] (deactivates the
function).
Password:
• Set the folder's Encryption Password.
❏ Recording
You can customize / adjust / set /
configure various settings related to
the recorder’s Dictation files.
DSS Format:
• Select the recording format (DSS
Pro/DSS Classic).
Record function:
• Select the recording mode
(Overwrite/Append/Insert).
File download:
• Select the files you want to be
transferred to the PC (All file/Finished
file).
❏Programmable Buttons
You can change the allocated
functions for the Programmable
Smart Buttons (F1, F2, F3 buttons),
the NEW button, and the Slide
Switch.
New and Slide Switch functions:
• Select a combination of functions.
Programmable Buttons:
• Select the function to associate to
the Programmable buttons (F1, F2,
F3 buttons) for each mode (New,
Stop, Recording, Playback mode).
❏Hands Free
You can customize / adjust / set /
configure settings related to the
Hands-Free operation with the Foot
Switch (optional).
• Locked SD cards cannot be
initialized.
• Memory cards will be formatted
using quick format. Formatting
the card will reset the information
in file management, but the data
inside the card may not be deleted
completely. Be careful of data
leakage when disposing or handing
of the card. We recommend that
you physically destroy the card
when disposing of it.

16
EN CS DA DE ES FR NL PL RU SV
Professional / Home Edition SP2 x64
Microsoft® Windows Vista®:
Ultimate / Enterprise / Business /
Home Premium / Home Basic SP2
(both x86/64)
Microsoft® Windows 7®:
Ultimate / Enterprise / Professional
/ Home Premium (both x86/64)
For Workgroup:
Microsoft® Windows® XP:
Professional SP3 x86
Professional SP2 x64
Microsoft® Windows Vista®:
Ultimate / Enterprise / Business SP2
(both x86/64)
Microsoft® Windows 7®:
Ultimate / Enterprise / Professional
(both x86/64)
Microsoft® Windows® Server 2003
SP2 (both x86/64)
Microsoft® Windows® Server 2003
R2 SP2 (both x86/64)
Microsoft® Windows® Server 2008
SP2 (both x86/64)
Microsoft® Windows® Server 2008
R2 (both x86/64)
CPU:
Microsoft® Windows® XP / Vista / 7:
1 GHz or higher
Microsoft® Windows® Server 2003:
1 GHz or higher
Microsoft® Windows® Server 2008:
2 GHz or higher
RAM:
Microsoft® Windows® XP:
256 MB or more
Microsoft® Windows Vista®:
1 GB or more
Microsoft® Windows 7®:
1 GB or more (32 bit) / 2 GB or more
(64 bit)
Microsoft® Windows® Server 2003:
256 MB or more
Microsoft® Windows® Server 2008:
2 GB or more
Hard drive space:
2 GB or more
Browser:
Microsoft Internet Explorer 6.0
or later
Drive:
CD-ROM, CD-R, CD-RW, DVD-ROM
drive
Display:
1024 x 768 pixels or more, 65,536
colors or more (16,770,000 colors or
more is recommended)
Managing files on your PC
ODMS and DSS Player software
The ODMS (Windows) and DSS
Player (Macintosh) software is
a fully featured software tool
that provides a simple to use
but sophisticated method for
managing your recordings. Some
of the features of the ODMS and
DSS Player software are:
• Customize functions on the recorder
(ODMS only).
• Automatic start-up of the application
by connecting the device.
• Automatic download of Dictation
files by connecting the device.
• Backs up downloaded Dictation files
(ODMS only).
• Automatic transmission of
downloaded Dictation files to
addresses specified through e-mail
and FTP (ODMS only).
• Automatic transmission of
transcribed documents through e-
mail and FTP, as well as Dictation files
and link management (ODMS only).
• Change the recorder’s menu settings.
• Direct recording and editing of
existing Dictation files through
Voice recorder’s button and slide
operation.
• Editing Instruction Comments and
Verbal comments (ODMS only).
• Encrypt Dictation files within the
folder by encrypting the folder itself
(ODMS only).
• Support front and background voice
recognition local and roaming profile
(ODMS only).
• Allow voice recognition text editing
with audio playback for efficient
transcription (ODMS only).
Make sure that your computer meets
the minimum requirements listed
below. Please check with your system
administrator or your Olympus
Professional Dealer.
Minimum requirement
ODMS software (Windows)
Operating System:
For Stand-Alone:
Microsoft® Windows® XP:
Professional / Home Edition SP3
x86
USB port:
One or more free ports
Others:
With the Dictation Module,
Transcription Module:
A Microsoft WDM- or MME-
compliant and Windows-
compatible sound device
DSS Player software (Macintosh)
Operating System:
Mac OS X 10.4.11 - 10.7
CPU:
PowerPC® G3 500 MHz or more,
or Intel Core Solo/Duo 1.5 GHz
or more
RAM:
256 MB or more (512 MB or more is
recommended)
Hard drive space:
200 MB or more
Drive:
CD-ROM, CD-R, CD-RW, DVD-ROM
drive
Browser:
Macintosh Safari 3.0.4 or later,
mozilla Firefox 3.6.20 or later
Display:
1024 x 768 pixels or more, 32,000
colors or more
USB port:
One or more free ports
Others:
• Audio device
Notes:
• Even if the above conditions are
satisfied, self-modified computers,
self-upgraded OS or multiple OS
environments are not supported.
• Macintosh version does not support
voice recognition software.
• For information on the latest OS
upgrades compatibility, visit the
Olympus Web page at
http://www.olympus-global.
com/en/global/.

17
EN CS DA DE ES FR NL PL RU SV
Other information
Troubleshooting
Symptom Probable cause Action
Nothing appears on the
display
The battery power is low. Charge the battery.
The recorder is turned off. Turn the power on.
The recorder is currently in Power Save
mode. Press any button.
Unable to record
The card does not have enough memory. Erase unnecessary files or insert another
card.
The card is unformatted. Format the card.
The maximum number of files has been
reached. Change to any other folder.
The file is locked. Unlock the file from the file menu.
The SD card is locked. Unlock the SD card.
No playback tone heard The earphone is connected. Unplug the earphones to use the internal
speaker.
The volume level is set to [00]. Adjust the volume level.
Unable to erase The file is locked. Unlock the file from the file menu.
The SD card is locked. Unlock the SD card.
Noise heard during playback
The recorder was shaken during recording.
———
The recorder was placed near a cell phone
or fluorescent lamp while recording or
during playback.
Avoid using the recorder near cell phones
or fluorescent lamps.
Recording level too low The microphone sensitivity is too low. Set the microphone sensitivity to the
conference mode and try again.
Unable to set index marks
The maximum number of index marks (32)
has been reached. Erase unnecessary index marks.
The file is locked. Unlock the file from the file menu.
The SD card is locked. Unlock the SD card.
Unable to set verbal
comments The maximum number of verbal comments (32) has been reached. Erase unnecessary verbal comments.
Cannot find the recorded file Wrong recording media or folder. Switch to the correct recording media or
folder.
Cannot find the transferred
files The transferred files are not supported by this recorder. The recorder can recognize the DSS file format* only.
Cannot connect to a PC Sometimes a connection cannot be made with some PCs running Windows XP, Vista
or 7.
You need to change the PC’s USB settings.
See ODMS software online help for details.
*Supports file formats: DS2 (DSS Pro QP or DSS Pro SP), DSS (QP or SP)

18
EN CS DA DE ES FR NL PL RU SV
Accessories (optional)
sNoise-cancellation
microphone: ME12
(Dictation microphone)
Used to get crisp recordings of
your own voice by reducing the
effects of ambient noise.
Recommended to improve the
accuracy when using voice-
recognition software.
sExternal microphone:
ME15
A lavalier omni-directional
microphone that clips to clothing.
Used to record your own voice or
people near you.
sPC transcription kit: AS-
7000
The AS-7000 transcription
kit provides you with a Foot
Switch, a headset and ODMS
and DSS Player software for easy
transcription of DSS recordings.
sFoot Switch: RS31
Connect to the USB docking
station with DS-7000 for hands-
free transcription.
sTelephone pickup: TP8
Earphone type microphone
can be plugged into your ear
while phoning. The voice or
conversation over the phone can
be clearly recorded.
sLithium ion battery: LI-42B
This lithium ion rechargeable
battery is manufactured by
Olympus. It is best paired with
the LI-42C battery charger.
Specifications
General points:
4Recording format:
DS2 (Digital Speech Standard Pro)
4Recording media:
microSD, SD card (512 MB to 32 GB)
4Sampling frequency:
[DSS Pro QP] 16 kHz
[DSS Pro SP] 12 kHz
4Speaker:
Built-in ø23 mm round dynamic
speaker
4MIC/EAR jack:
ø3.5 mm mini-jack, impedance
MIC 2 k, EAR 8  or more
4Maximum working output
(DC 3.7 V):
235 mW (8  speaker)
4Maximum headphone
output:
â150 mV (according to EN
50332-2)
4Input power requirement:
Battery: Lithium ion battery
(LI-42B)
External power supply: AC
adapter (A517) 5 V
4External dimensions:
114.5 mm × 49.8 mm × 17.5 mm
(without protrusions)
4Weight:
107 g (Including battery)
4Operating temperature:
0°C - 42°C
Overall frequency response
[DSS Pro QP] 200 Hz to 7,000 Hz
[DSS Pro SP] 200 Hz to 5,000 Hz
Guide to battery life
The following values are strictly
references.
4During recording mode
(Built-in microphone):
[DSS Pro QP] Approx. 18 h.
[DSS Pro SP] Approx. 21 h.
4During playback mode
(Earphone playback):
All mode: Approx. 21 h.
Guide to recording times:
The following values are strictly
references.
4[DSS Pro SP] :
2GB 306 h.
4GB 615 h.
8GB 1,237 h.
4[DSS Pro QP] :
2GB 149 h.
4GB 300 h.
8GB 604 h.
• The above are the standard times,
and the available recording time
will vary depending on the card.
• Available recording time may be
shorter if many short recordings are
made.
• Total recording time of several files.
The maximum recording time per
file is 99 hours 59 minutes.
Specifications and design are
subject to change without notice.
Battery life is measured by
Olympus. It varies greatly
according to the conditions of use.

19
EN CS DA DE ES FR NL PL RU SV
Technical assistance and support
The DS-7000 is part of the Olympus Professional Dictation System.Your certified professional dealer has been fully trained on the
entire Olympus Professional Dictation range, including dictation, transcription devices and software. For technical assistance and
guidance relating to installation and set up, please contact your professional dealer from whom you purchased the system.
For customers in Europe:
“CE”mark indicates that
this product complies
with the European
requirements for safety,
health, environment
and customer
protection.
This symbol [crossed-
out wheeled bin WEEE
Annex IV] indicates
separate collection of
waste electrical and
electronic equipment in
the EU countries. Please
do not throw the equipment into the
domestic refuse. Please use the return
and collection systems available in
your country for the disposal of this
product.
Applicable Product: DS-7000, AC
adapter, Docking station
This symbol [crossed-
out wheeled bin
Directive 2006/66/EC
Annex II] indicates
separate collection of
waste batteries in the
EU countries. Please do not throw the
batteries into the domestic refuse.
Please use the return and collection
systems available in your country for
the disposal of the waste batteries.

20
EN CS DA DE ES FR NL PL RU SV
• Děkujeme, že jste zakoupili digitální
diktafon Olympus. Informace
o správném a bezpečném používání
tohoto produktu naleznete v těchto
pokynech k použití. Uschovejte si
je pro budoucí použití. Aby bylo
nahrávání úspěšné, doporučujeme
před použitím diktafonu otestovat
funkci nahrávání a úroveň hlasitosti.
• Tato příručka je základní verze.
Další podrobnosti jsou k dispozici
v úplné a rozšířené verzi příručky*
(formát PDF), kterou lze stáhnout na
webových stránkách OLYMPUS.
*K dispozici v angličtině,
francouzštině nebo němčině.
• Obsah tohoto dokumentu se může
v budoucnosti bez předchozího
upozornění změnit. Chcete-li získat
nejnovější informace o názvech
výrobků a číslech modelů,
kontaktujte oddělení podpory
zákazníků.
• Obrázky displeje a diktafonu v tomto
návodu se mohou od vlastního
produktu lišit. Správnosti obsahu
tohoto dokumentu byla věnována
maximální péče. Pokud přesto
naleznete nesrovnalosti, chybu nebo
chybějící informaci, kontaktujte
oddělení podpory zákazníků.
• Společnost Olympus nenese
odpovědnost za poškození nebo
jakékoli škody vzniklé v důsledku
ztráty dat způsobené poruchou
produktu, opravy provedené jiným
subjektem než společností Olympus
nebo autorizovaným servisním
střediskem Olympus nebo z jiných
důvodů.
Ochranné známky a registrované
ochranné známky
• Microsoft a Windows jsou
registrované ochranné známky
společnosti Microsoft Corporation.
• Macintosh je ochranná známka
společnosti Apple Inc.
• Intel je registrovaná ochranná
známka společnosti Intel Corporation.
• SD a microSD jsou ochranné známky
společnosti SD Card Association.
• SDHC a microSDHC jsou ochranné
známky společnosti SD Card
Association.
Ostatní značky a názvy výrobků
uvedené v této příručce jsou
ochrannými známkami nebo
registrovanými ochrannými
známkami příslušných vlastníků.
Úvod
CS
Bezpečnostní zásady
Před prvním použitím nového
diktafonu si pozorně přečtěte tuto
příručku, abyste se s ním naučili
bezpečně a správně zacházet.
Uschovejte tuto příručku na
snadno přístupném místě pro
budoucí použití.
• Varovné symboly upozorňují na
důležité informace týkající se
bezpečnosti. Abyste ochránili sebe
a ostatní před zraněním nebo
věcným poškozením, je důležité,
abyste si vždy přečetli všechna
předložená varování a informace.
• Na obrázcích a popisech v této
příručce je na displeji uvedena
angličtina. Diktafon umožňuje
nastavení jazyka displeje.
Podrobnosti viz »Language(Lang)«.
Upozornění na prostředí používání
• Abyste ochránili vysoce přesné
součásti obsažené v tomto diktafonu,
nikdy jej nepoužívejte ani neskladujte
na níže uvedených místech:
− Místa s vysokou teplotou či
vlhkostí nebo s prudkými
změnami teploty či vlhkosti.
Přímý sluneční svit, pláže,
zavřená vozidla nebo místa
v blízkosti zdrojů tepla (sporák,
radiátor atd.) či zvlhčovačů.
− V blízkosti hořlavých materiálů či
výbušnin.
− Vlhká místa jako koupelna či v
dešti.
− Místa se silnými vibracemi.
• Nikdy diktafon neupouštějte na zem
ani nevystavujte silným nárazům či
vibracím.
•
Pokud je diktafon používán v místech
s magnetickým/elektromagnetickým
polem, rádiovým vlněním či vysokým
napětím, například v blízkosti
televizoru, mikrovlnné trouby,
videoherního systému, reproduktorů,
velkoplošného monitoru nebo
televizního, rádiového či jiného vysílače,
může dojít k jeho selhání. V takovém
případě diktafon před dalším
používáním vypněte a znovu zapněte.
• Vyvarujte se nahrávání nebo
přehrávání v blízkosti mobilních
telefonů nebo jiných bezdrátových
zařízení, která mohou způsobit
interferenci a šum. Zaznamenáte-li
rušení, přesuňte se jinam nebo diktafon
umístěte dále od těchto zdrojů.
• K čištění přístroje nepoužívejte
organická rozpouštědla, jako je
alkohol nebo ředidlo.
Varování týkající se ztráty dat:
• Nahraný obsah paměti může být
zničen nebo smazán v důsledku
nesprávného ovládání přístroje,
poruchy nebo v průběhu opravy.
Doporučujeme zálohovat a uložit
důležitý obsah na jiné médium, jako
je např. pevný disk počítače.
• Jakákoli odpovědnost společnosti
Olympus za pasivní škody nebo za
jakoukoli škodu způsobenou ztrátou
dat z důvodu závady produktu,
opravy provedené někým jiným, než
společností Olympus, autorizovaným
střediskem Olympus nebo z jakéhokoli
jiného důvodu je vyloučena.
fNebezpečí
Pokud je produkt používán bez
uposlechnutí rad uvedených
pod tímto symbolem, může dojít
k vážnému zranění nebo úmrtí.
fVarování
Pokud je produkt používán bez
uposlechnutí rad uvedených
pod tímto symbolem, může dojít
ke zranění nebo úmrtí.
fUpozornění
Pokud je produkt používán bez
uposlechnutí rad uvedených
pod tímto symbolem, může
dojít k lehkému poranění osob,
poškození zařízení či ztrátě
cenných dat.
Smluvená označení použitá v tomto
návodu k obsluze
• Slovo »karta« označuje jak kartu SD,
tak i kartu microSD.
• Slovo »ODMS« označuje Olympus
Dictation Management System v
operačním systému Windows.
• Slovo »DSS Player« označuje
přehrávač DSS Player pro Mac v
prostředí Apple Macintosh.
Pro zákazníky, kteří zakoupili
standardní verzi DS-7000:
• dodáváno s různým příslušenstvím z
verze DS-7000.
Potřebujete-li příslušenství, které
není součástí dodávky, zakupte je
samostatně.