Omcan RS-CN-0186 User manual

Revised - 01/21/2020
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com
Refrigerated Showcases
Models RS-CN-0186, 0370-L
Items 44379, 44544
Instruction Manual

2
Page
-------------------------------------------------------------------------------------------- 3
--------------------------------------------------------------------------- 4 - 5
--------------------------------------------------------------------------- 5 - 7
-------------------------------------------------------------------------- 7
----------------------------------------------------------------------------------------- 8 - 9
----------------------------------------------------------------------------------------- 9
------------------------------------------------------------------------------- 9 - 10
---------------------------------------------------------------------------- 11 - 14
---------------------------------------------------------------------- 15 - 16
------------------------------------------------------------------------------------------- 17 - 18
---------------------------------------------------------------------------- 19
Table of Contents
Section
Disclaimer
General Information
Safety and Warranty
Technical Specications
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model RS-CN-0186 / Model RS-CN-0370-L

3
Disclaimer
OMCAN IS NOT RESPONSIBLE FOR
ANY DAMAGES DUE TO WATER LEAKS.
WARRANTY FOR WATER LEAKS IS VOID
IF THE AMBIENT ROOM TEMPERATURE
EXCEEDS 75°F AND 55% RELATIVE
HUMIDITY, AND THE APPLIANCE DRAIN IS
NOT CONNECTED DIRECTLY TO A FLOOR
DRAIN.

4
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

5
General Information
Safety and Warranty
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
HANDLING AND INSTALLATION
Handle with care
Unplug wall socket before moving. Never tilt the
refrigerator over 45 degrees during handling.
Storage
Always store the refrigerator in a dry place.

6
Safety and Warranty
Su󰀩cient space
To allow for proper air circulation and increased
refrigeration capabilities, the refrigerator must have at
least 4 inches of space between wall and unit.
Proper ventilation
Always place the refrigerator in an area with good
ventilation. For rst time use, wait at least 2 hours
before plugging into wall socket.
Away from heat source
Never place the refrigerator near any type of heat
source or in direct sunlight, as it reduces refrigeration
capabilities.
No heavy load
Never put heavy items on top of the refrigerator.
No altercations/tampering
Never tamper with or make changes to the
refrigerator. Changes and add-ons should not be
installed to the inside or outside of the refrigerator.
Stable location
Unpack and place the refrigerator on at, solid
ground.
PREPARATION AND POWER SUPPLY
Exclusive power outlet
Power supply should be 115-120V, single phase
AC with exclusive single phase three pin outlet
(250V/10A) and fuse (6A). The power outlet must be
in close proximity to the ground.
No shared power outlets
Refrigerator cable should never share the power
outlet with any other appliance, as cable will overheat
and may result in a re.
Protect cables
Extra caution should be used when handling cables,
as broken or damaged cables can cause sparking
and may result in a re.
No water ushing
Never ush the refrigerator surface. This can cause
leakage, which may result in electrical damage or re.
Never store ammables and explosives
No explosives or ammables should be stored in,
or in proximity to, the refrigerator, such as gasoline,
alcohol, and adhesives.
No spray
Never spray ammables such as paint or coating
near the refrigerator. This may cause re or
malfunction.
After power outage
After a power outage or the unplugging of the
refrigerator, wait at least 5 minutes before plugging it
back in.
No medicine
Medicine should not be stored inside of the
refrigerator.
OMCAN IS NOT RESPONSIBLE FOR ANY DAMAGES DUE TO WATER LEAKS. WARRANTY FOR
WATER LEAKS IS VOID IF THE AMBIENT ROOM TEMPERATURE EXCEEDS 75°F AND 55% RELATIVE
HUMIDITY, AND THE APPLIANCE DRAIN IS NOT CONNECTED DIRECTLY TO A FLOOR DRAIN.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

7
Safety and Warranty
Technical Specications
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without di󰀩culty.
In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Model RS-CN-0186 RS-CN-0370-L
Capacity 186 L / 6.6 cu.ft. 370 L / 13.1 cu.ft.
Compressor Power 0.75 HP 1 HP
Rated Current 11.6 A 14.5 A
Refrigerant R404a
Temperature Range 2 - 10°C / 35.6 - 50°F
Electrical Heating
Element 450W
Lamp Power 2.6W 3.2W
Number of Shelves 1
Electrical 110V / 60Hz / 1
Dimensions 26” x 35.9” x 42”
660 x 912 x 1067mm
51.7” x 35.9” x 42”
1313 x 912 x 1067mm
Weight 198.4 lbs. / 90 kgs. 346 lbs. / 157 kgs.
Item Number 44379 44544

8
Operation
BEFORE USE
• Plug refrigerator into the 110-120V exclusive socket.
• After the refrigerator is running, conrm that air suction/ltration is in order and that it is su󰀩ciently cold.
After checking to make sure the refrigerator is working properly, it may be used.
DIGITAL TEMPERATURE CONTROLLER
FEATURES OF FUNCTION
• Small, integrated digital controller, which is applicable to the compressor of 1 Hp.
• Main functions are: Temperature Display/Temperature Control/Manual-Automatic /Light Control/Value
Storing/Self-Testing/Parameter Locking.
FRONT PANEL OPERATION
1. Set temperature: Press button; set temperature will be displayed. Press or button to modify and
store the displayed value. Press button to exit the adjustment and display the cold-room temperature.
2. If no button is pressed within 10 seconds, the cold-room temperature will be displayed.
3. Lighting: Press button to activate light in refrigerator; press again to turn o󰀨. Manual start/stop defrost:
Press button and hold for 6 seconds to either defrost or to stop defrost.
4. Refrigeration LED: During refrigeration, the LED is on. When the cold room temperature is constant, the
LED is o󰀨. During delay start, the LED ashes.
5. Defrost LED: During defrosting, the LED is on. When it stops defrosting, the LED is o󰀨. During the delay of
defrost, the LED ashed.
6. Digital controller reset: When the display shows “Disorder”, press button for 2 seconds until buzzer rings.
Quickly press button for 6 seconds until the buzzer rings again, the display will ash for 3 seconds and it
will restore to the factory settings.
CAUTION
• Minimizing time the time and frequency that the door is open will maintain temperature.
• Never block the air outlet and suction to keep the air circulation and refrigeration capability constant.
• Do not overll refrigerator with food, as it will inuence the cooling e󰀨ect. If needed, adjust the rack height
for proper food storage.
• Cool down hot food to room temperature before placing inside the refrigerator.
• When power supply has been cut o󰀨, reduce opening times and maintain cool temperature in refrigerator.

9
Troubleshooting
DIGITAL CONTROLLER TROUBLESHOOTING
Fault Code Causes Solutions
EE1 Open or short circuit of
temperature probe.
Check if the plug on the mainboard is loose, or
change the temperature probe.
EE2 Open or short circuit of defrosting
probe.
Check if the plug on the mainboard is loose, or
change the defrosting probe.
EE3 Open or short circuit of overheating
probe.
Check if the plug on the mainboard is loose, or
change the overheating probe.
EE4 Overheating probe starts
protecting program 58°C / 136.4°F.
Clean the condenser.
Repair or replace the Condenser motor.
Ensure the unit is at least 50cm away from the wall.
Ensure the ambient temperature is within the range
specied on the rating label.
Maintenance
1. Cabinet Cleaning. The product should be cleaned once a week with the power supply disconnected.
Please use mild detergent and water. Do not wash it directly with a water faucet or by submerging the unit
in any way.
2. De-dusting the condenser. The condenser should be cleaned every three months with the power supply
disconnected. To clean the condenser, use a wire brush carefully.
3. Leaking check. Observe all connectors and welded joints for oil stains, is oil stains are visible please call
Omcan.
4. Frequently observe the operation of the product. In case of any abnormal noise or smell, cut o󰀨 the power
supply immediately and call professionals. Do not restart the product before source of trouble is found.
5. We will not be responsible for any accidents acquired through failure to follow previous notices.
Operation
• To avoid scalding, never touch the compressor.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly
qualied persons in order to avoid hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

10
Troubleshooting
GENERAL TROUBLESHOOTING
Problems Possible Causes Solutions
Strange noise under the bottom
shelf.
Fan blade broken. Power o󰀨 and x the blade.
Non-refrigerating in spite of normal
operation.
Unit o󰀨. Power on.
Melting process. Stop melting.
Refrigerant leaking. Patch the leak and rell refrigerant.
Unit failure. Call Omcan.
Weak air from air curtain, and
higher cabinet temperature.
Evaporator blocked by frost. Increase melting frequency.
Inside fan damaged. Replace the fan.
Too low set point of temperature
controller.
Adjust the set point.
Vent blocked by storage. Remove the storage.
Normal air curtain, but higher
cabinet temperature.
Insu󰀩cient refrigerant. Rell the refrigerant.
Too high set point of temperature
controller.
Adjust the set point for the
temperature controller.
The wind curtain disturbed by
strong air ow.
Remove the disturbing factors.
Ambient temperature or humidity
beyond standards.
Improve the conditions.
Melting water overown. Heating pipe for melting water
damaged.
Replace the heating pipe.
Water-level controller failure. Replace the water-level controller.
Ambient temperature or humidity
beyond standards.
Improve the conditions.
Normal air curtain, but periodical
uctuation of cabinet temperature.
Condenser contaminated. Clean the condenser.
Poor venting of the unit. Improve the venting conditions.
Heat protection of compressor
failure.
Replace the heat protection.
Capillary is blocked by ice. Replace the drying lter.
Temperature controller failure. Replace the temperature controller.
NOTE
Following occurrences are not problems:
• The murmur of water is heard when the refrigerator is working. It is a normal occurrence as the coolant is
circulating in the system.
• When the weather is damp, condensation might be found on the outside of the refrigerator. It is caused by
high humidity. Simply use cloth to wipe it o󰀨.

11
Parts Breakdown
Model RS-CN-0186 44379

12
Parts Breakdown
Model RS-CN-0186 44379
Item No. Description Position Item No. Description Position Item No. Description Position
60670 PPR Pipe Strap for RTS-186L 1 68311 Evaporator Cover for RTS-186L 26 68336 Fan for RTS-186L 52
68298 Switch Base for RTS-186L 2 68312 Front Decorating Board for RTS-186L 27 68337 Motor for RTS-186L 53
68299 Switch Base Lid for RTS-186L 3 68313 Left Board for RTS-186L 28 68338 Evaporator Base Board Assembly for
RTS-186L 54
68300 Display for RTS-186L 4 68314 Windshield Strip for RTS-186L 29 68339 Windshield for RTS-186L 55
70105 Switch for RTS-186L 5 68315 Air Intake for RTS-186L 30 68340 Front Decorating Board for RTS-186L 56
68301 Strong Magnet for RTS-186L 6 68316 Windshield of Air Intake for RTS-186L 31 60932 Flange for RTS-186L 57
61224 Dry Filter for RTS-186L 7 68317 Left Board for RTS-186L 32 60933 Fan for RTS-186L 58
68302 Pressing Plate of Dry Filter for RTS-186L 8 68318 Left Glass for RTS-186L 33 68341 Motor for RTS-186L 59
60669 Slot for RTS-186L 9 68319 Rear Ventilation for RTS-186L 34 60674 Driver for RTS-186L 60
61246 Wire Clip Holder for RTS-186L 10 68320 Rear Board Assembly for RTS-186L 35 68342 Condenser for RTS-186L 61
61245 Cable Clip Lid for RTS-186L 11 68321 Curtain for RTS-186L 36 68343 Condenser Motor Support for RTS-186L 62
60561 Caster for RTS-186L 12 68322 LED for RTS-186L 37 68344 Supporting Bar for RTS-186L 63
60562 Caster with Brake for RTS-186L 12 60637 Jump Ring of LED for RTS-186L 38 79368 Air Filter for RTS-186L 64
67641 Compressor for RTS-186L 13 68323 Top Decorating Plate for RTS-186L 39 68345 Base Cover Assembly for RTS-186L 65
68303 Base Net for RTS-186L 14 68324 Top Decorating Plate for RTS-186L 40 68346 Window-Shades Board for RTS-186L 66
68304 Mufer for RTS-186L 15 68325 LED Assembly for RTS-186L 41 68347 Base for RTS-186L 67
68305 Copper Heating Element for RTS-186L 16 68326 Honeycomb Fixed Plate for RTS-186L 42 68348 Window-Shades for RTS-186L 68
60651 Curtain Hook for RTS-186L 17 68327 Honeycomb Plate for RTS-186L 43 68349 Base Stiffening Board for RTS-186L 69
60587 Water Tray Assembly for RTS-186L 18 68328 Right Glass for RTS-186L 44 61167 Circuit Board Box for RTS-186L 70
79304 Water Evaporating Pipe for RTS-186L 19 68329 Right Board for RTS-186L 45 67649 Mainboard for RTS-186L 71
68306 Leakage for RTS-186L 20 68330 Right Board for RTS-186L 46 60594 Mainboard Box Lid for RTS-186L 72
68307 Heating Element for RTS-186L 21 68331 Windshield Clamp for RTS-186L 47 79290 Power Line for RTS-186L 73
68308 Heating Element Support for RTS-186L 22 68332 Temperature Sensor for RTS-186L 48 60668 Drainage for RTS-186L 74
71562 Evaporator for RTS-186L 23 68333 Over-Heating Sensor for RTS-186L 49 67643 Terminal Box for RTS-186L 75
68309 Right Fixed Plate of Evaporator Motor
for RTS-186L 24 68334 Right Fixed Plate of Evaporator Motor for RTS-186L 50 67642 Terminal Box Lid for RTS-186L 76
68310 Fixed Plate of Evaporator Motor for
RTS-186L 25 68335 Flange for RTS-186L 51 60590 PVC Trunking for RTS-186L 77

13
Parts Breakdown
Model RS-CN-0370-L 44544

14
Parts Breakdown
Model RS-CN-0370-L 44544
Item No. Description Position Item No. Description Position Item No. Description Position
60562 Caster with Brake for RTS-370L 1 68363 Rear Ventilation Board for RTS-370L 30 66351 Fan for RTS-370L 58
60561 Caster for RTS-370L 2 68327 Honeycomb Plate for RTS-370L 31 60932 Flange for RTS-370L 59
68351 Base Assembly for RTS-370L 3 68364 Honeycomb Fixing Plate for RTS-370L 32 68337 Condenser Fan Motor for RTS-370L 60
61246 Wire Clip Holder for RTS-370L 4 68365 Honeycomb Fixing Plate for RTS-370L 33 68382 Dead Plate of Evaporator Motor for
RTS-370L 61
61245 Wire Clip Cover for RTS-370L 5 68366 Left Support of Evaporator Motor for
RTS-370L 34 68383 Air Deector for RTS-370L 62
60726 Power Line for RTS-370L 6 68367 Left Bafe of Air Duct for RTS-370L 35 68384 Evaporator for RTS-370L 63
67690 Compressor Protect Probe for RTS-370L 7 68317 Left Plate for RTS-370L 36 68385 Evaporator Extended Board for RTS-
370L 64
68353 Temperature Sensor for RTS-370L 8 68318 Left Glass for RTS-370L 37 68386 Right Bafe of Air Ducts for RTS-370L 65
68313 Left Side Board for RTS-370L 9 68306 Leakage for RTS-370L 38 68387 Right Support for Evaporator Motor for
RTS-370L 66
68354 Compressor Base Board for RTS-370L 10 68368 Snap Ring for RTS-370L 39 68388 Evaporator Water Tray for RTS-370L 67
68355 Compressor for RTS-370L 11 68369 Base Board for RTS-370L 40 68389 Bottom Foam of Evaporator for RTS-
370L 68
67642 Cover of Terminal Box for RTS-370L 12 68370 Rear Board for RTS-370L 41 68390 Base Cover for RTS-370L 69
68356 Driver for RTS-370L 13 68371 Curtain for RTS-370L 42 68391 High Pressure Copper Pipe for RTS-
370L 70
60590 PVC Trucking for RTS-370L 14 68372 LED for RTS-370L 43 60652 Pressing Plate of High Pressure Pipe
for RTS-370L 71
60594 Cover of Mainboard Box for RTS-370L 15 60637 Jump Ring of LED for RTS-370L 44 68392 Water Tray Support for RTS-370L 72
67649 Mainboard for RTS-370L 16 68373 Upper Decorative Sheet for RTS-370L 45 68393 Pan of High Temperature Pipe for
RTS-370L 73
61167 Circuit Board Box for RTS-370L 17 68374 Top Fixing Plate for RTS-370L 46 68394 Seal Ring for RTS-370L 74
67643 Terminal Box for RTS-370L 18 68375 Top Decorative Sheet for RTS-370L 47 68395 Bibcock for RTS-370L 75
68357 Stiffening Plate of Base for RTS-370L 19 68328 Right Glass for RTS-370L 48 60587 Water Tray Assembly for RTS-370L 76
68358 High Pressure Joint Pipe for RTS-370L 20 68329 Right Plate for RTS-370L 49 68396 Motor for RTS-370L 77
61224 Dry Filter for RTS-370L 21 68376 Air Intake Support for RTS-370L 50 68397 Condenser for RTS-370L 78
68359 Pressing Plate of Dry Filter for RTS-370L 22 68377 Windshield of Air Intake for RTS-370L 51 60670 PPR Tube Strap for RTS-370L 79
68360 Net in Base for RTS-370L 23 68378 Air Intake for RTS-370L 52 68398 Copper Connection for RTS-370L 80
68361 Switch Panel for RTS-370L 24 68379 Windshield for RTS-370L 53 60668 Stainless Steel Drainage for RTS-370L 81
68298 Switch Panel Base for RTS-370L 25 68331 Windshield Clamp for RTS-370L 54 68301 Strong Magnet for RTS-370L 82
68299 Cover Plate of Switch Panel Base for
RTS-370L 26 68380 Saddle Bar for RTS-370L 55 68399 Window-Shades Assembly for RTS-370L 83
70105 Switch for RTS-370L 27 68402 Front Decorating Board for RTS-370L 56-1 68400 Supporting Plate of Window-Shades for
RTS-370L 84
68300 Display for RTS-370L 28 68403 Front Dead Plate for RTS-370L 56-2 68330 Right Board for RTS-370L 85
68362 Baseboard for RTS-370L 29 68381 Evaporator Support for RTS-370L 57 68401 Stiffening Strip of Switch Panel for
RTS-370L 86

15
Model RS-CN-0186 44379
Electrical Schematics

16
Electrical Schematics
Model RS-CN-0370-L 44544

17
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________

18
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________

19
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o󰀨 the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
https://omcan.com/warranty-registration/
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No

Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour di󰀨usion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 5,000 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 5,000 productos con origen a nivel mundial.