Omcan Rs-cn-0004-p User manual

Revised - 12/17/2020

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

Refrigerated Topping Rails

Models RS-CN-0004-P, 0006-P, 0009-P

Items 46679, 41937, 46680

Instruction Manual

2

Page

-------------------------------------------------------------------------------------------- 3

--------------------------------------------------------------------------- 4 - 5

--------------------------------------------------------------------------- 5 - 7

-------------------------------------------------------------------------- 8

-------------------------------------------------------------------------------------- 8 - 10

-------------------------------------------------------------------------------------------- 11

--------------------------------------------------------------------------------- 11 - 12

----------------------------------------------------------------------------------- 12

---------------------------------------------------------------------------- 13 - 14

---------------------------------------------------------------------------- 15

------------------------------------------------------------------------------------------- 16 - 18

---------------------------------------------------------------------------- 19

Table of Contents

Section

Disclaimer

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model RS-CN-0004-P / Model RS-CN-0006-P / Model RS-CN-0009-P

3

Disclaimer

OMCAN IS NOT RESPONSIBLE FOR

ANY DAMAGES DUE TO WATER LEAKS.

WARRANTY FOR WATER LEAKS IS VOID

IF THE WICKING PAD IS NOT REPLACED

EVERY SIX MONTHS, AND IF THE AMBIENT

ROOM TEMPERATURE EXCEEDS 75°F

AND 55% RELATIVE HUMIDITY, AND THE

APPLIANCE DRAIN IS NOT CONNECTED

DIRECTLY TO THE FLOOR DRAIN.

4

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

5

Safety and Warranty

General Information

Please pay close attention to the safety notices in this section. Disregarding these notices may lead to serious

injury and/or damage to the unit.

ATTENTION

• To minimize shock and re hazards, be sure not to overload outlet. Please designate one outlet for your

unit.

• Do not use extension cords.

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para

salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

6

Safety and Warranty

• When the unit is not in use for a long period of time, please unplug the unit from the outlet.

• After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so could cause

damage to the compressor.

UNPLUG CORD

• To minimize shock and re hazards, please do not plug or unplug the cord with wet hands.

• During maintenance and cleaning, please unplug the unit.

PROPER GROUNDING REQUIRED

• To minimize shock and re hazards, make sure that the unit is properly grounded.

WARNING

• Do not attempt to remove or repair any component unless instructed by factory.

• Make sure that the unit is not resting on or against the electrical cord and plug.

• To minimize personal injury, do not hang on the doors.

• Do not store any ammable and explosive gas or liquids inside the unit.

• Do not attempt to alter or tamper with the electrical cord.

DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. TO BE REPAIRED

ONLY BY TRAINED SERVICE PERSONNEL. DO NOT PUNCTURE REFRIGERANT TUBING.

CAUTION – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. CONSULT REPAIR

MANUAL/OWNER’S GUIDE BEFORE ATTEMPTING TO SERVICE THIS PRODUCT. ALL SAFETY

PRECAUTIONS MUST BE FOLLOWED.

CAUTION – RISK OF FIRE OR EXPLOSION DUE TO PUNCTURE OF REFRIGERANT TUBING; FOLLOW

HANDLING INSTRUCTIONS CAREFULLY. FLAMMABLE REFRIGERANT USED.

CAUTION – RISK OF FIRE OR EXPLOSION DUE TO FLAMMABLE REFRIGERANT USED.

FOLLOW HANDLING INSTRUCTIONS CAREFULLY IN COMPLIANCE WITH LOCAL GOVERNMENT

REGULATIONS.

IMPORTANT!!! PLEASE READ BEFORE INSTALLATION

• If the unit has recently been transported on its side, please let unit stand still for a minimum of 24 hours

before plugging it in.

• Make sure that the unit drops down to desired temperature before loading the unit with product.

• Make sure that there is proper ventilation around the unit in the area where it will operate.

• Make sure all accessories are installed (i.e.. Shelves, shelf clips, casters) before plugging the unit in.

• Please read through the manual in its entirety.

CABINET LOCATION GUIDELINES

• Install the unit on strong and leveled surfaces.

- Unit may be noisy if surface is uneven.

- Unit may malfunction if surface is uneven.

7

Safety and Warranty

• Install the unit in an indoor, well-ventilated area.

- Unit performs more e󰀩ciently in a well-ventilated area.

- For best performance, please maintain clearance of 4” on the back and side of the unit. Brackets should

be attached on the back of the unit.

- Outdoor use may cause decreased e󰀩ciency and damage to the unit.

• Avoid installation in a high humidity and/or dusty area.

- Humidity could cause unit to rust and decrease e󰀩ciency of the unit.

- Dust collected on condenser coil will cause unit to malfunction.

- Malfunction due to dirty condenser will void warranty.

• Select a location away from heat and moisture-generating equipment.

- High ambient temperatures will cause the compressor to overwork, leading to higher energy bills and

gradual breakdown of the unit. With the lid open, the unit should not be used in areas over 80 degrees. The

unit should not be used in areas over 90 degrees.

- Malfunction due to high ambient temperature will void warranty.

ELECTRICAL

• Please ensure that the required voltage of the compressor is being supplied at all times. Low or high

voltage can detrimentally a󰀨ect the refrigeration unit.

• All units should be plugged into a grounded and properly-sized electrical outlet with appropriate overcurrent

protection. Please refer to the electrical requirements on the nameplate.

• Please make sure that your unit has its own dedicated outlet.

• Do not use an extension cord.

1 YEAR PART AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components (cardboard, polyethylene, and others) are classied as normal solid urban waste

and can therefore be disposed of without di󰀩culty.

In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

8

Installation

PACK CONTENTS

The following is included:

• Refrigerator or Freezer.

• Top glass panel.

• Rear glass panel.

• Side glass panels x 2.

• Instruction manual.

• Collars x 6.

• Bolt Assembly x 14 sets.

• Brackets x 7.

• Grub screws x 7.

• Screws x 12.

• Plugs x 14.

• Gastranorm adaptor bar.

• Adjustable feet x 4.

We pride itself on quality and service, ensuring that at the time of packaging the contents are supplied fully

functional and free of damage. Should you nd any damage as a result of transit, please contact Omcan

immediately.

Technical Specications

Model RS-CN-0004-P RS-CN-0006-P RS-CN-0009-P

Pan Capacity 4 - 1/3GN 6 - 1/3GN 9 - 1/3GN

8 - 1/6GN 12 - 1/6GN 18 - 1/6GN

Refrigerant R600a

Electrical 120V / 60Hz / 1

Current 1.6A 1.8A 2A

Power 140W

Temperature Range 2.2 - 10°C / 36 - 50°F

Max Ambient Temp

Rating 32°C / 90°F

Dimensions 47” x 15.5” x 17”

1200 x 395 x 435mm

59” x 15.5” x 17”

1500 x 395 x 435mm

78.7” x 15.5” x 17”

2000 x 395 x 435mm

Packaging Dimensions 48.8” x 17” x 18”

1240 x 435 x 460mm

60.6” x 14.7” x 18”

1540 x 375 x 460mm

80” x 17” x 18”

2040 x 435 x 460mm

Weight 88 lbs. / 40 kgs. 132 lbs. / 60 kgs. 176 lbs. / 80 kgs.

Packaging Weight 176 lbs. / 80 kgs. 234 lbs. / 106 kgs. 282 lbs. / 128 kgs.

Item Number 46679 41937 46680

9

Installation

Note: If the unit has not been stored or moved In an upright position, let it stand upright for

approximately 12 hours before operation.

1. Remove the appliance from the packaging. Make sure that all protective plastic lm and coatings are

thoroughly removed from all surfaces.

2. Maintain a distance of 20cm (7”) between the unit and walls or other objects for ventilation. Increase this

distance if the obstacle is a heat source.

Note: Before using the appliance for the rst time, clean Interior with soapy water.

3. Level the appliance by adjusting the screw feet.

FIT GLASS PANELS

1. Screw the collars to the rim of the appliance.

Note: Ensure the hole In the collar for the grub screw faces

inwards.

2. Slot the two side panels into the collars, with the holes in the

glass at the top.

Note: Ensure the screw hole furthest from the edge of the

panel goes to the back of the appliance.

3. Screw a grub screw into each collar to secure the panels.

Note: Ensure the soft end of the grub screw is the end

making contact with the glass.

4. Slot the rear panel into the collars, with the holes in the glass at

the top.

5. Screw a grub screw into each collar to secure the panel.

6. Slot the plastic plugs into each of the holes.

7. Screw the brackets to the inside of each pane using the bolt assemblies.

Note: Ensure the short end of the bolt assembly is on the outside of the panels.

8. Place the top panel onto the brackets, ensuring all holes line up.

9. Insert the plugs and attach the top panel to the brackets with the bolt assemblies.

10

Installation

GLASS ASSEMBLY GUIDE

11

Operation

LOADING FOOD PANS

Counter top units are designed to function with all pans in place, even if some pans are to be left empty. For

maximum food freshness, ll the pans only with an amount that can be used in a specic usage period. During

non-use, please close the insulated lid cover or remove all food.

STORING FOOD

To get the best results from your appliance, follow these instructions:

1. Only store food stu󰀨s in the appliance when it has reached the correct operating temperature.

2. Ensure gastronorm bays are full at all times. Empty bays will greatly reduce e󰀩ciency of the appliance.

3. Do not obstruct the fans inside the appliance.

OPERATING

1. Close the door(s) of the appliance.

2. Ensure the power switch is set to (0) and plug into the socket.

3. Switch on the Power (I). The current temperature within the appliance is displayed.

MANUAL DEFROST

The appliance will automatically run a defrost cycle every six hours.

Note: The cycle starts from the time the appliance is initially powered up.

TO MANUALLY DEFROST THE APPLIANCE:

1. Press and hold the DEFROST button for 5 seconds.

2. The defrost cycle will start immediately and the Defrost LED illuminates. The defrost will last a maximum of

30 minutes.

Note: Starting a manual defrost also resets the automatic defrost timer. The next automatic defrost

will start six hours after the manual defrost has nished.

3. Waste water is collected in the waste water tray.

Maintenance

WARNING: DISCONNECT POWER CORD BEFORE CLEANING ANY PARTS OF THE UNIT.

CLEANING THE CONDENSER COIL

• For e󰀩cient operation, it is important that the condenser surface be kept free of dust, dirt, and lint.

• We recommend cleaning the condenser coil and ns at least once per month.

• Clean with a commercial condenser coil cleaner, available from any kitchen equipment retailer. Brush the

condenser ns from top to bottom, not side to side.

12

Maintenance

Troubleshooting

• After cleaning, straighten any bent condenser ns with a n comb.

CLEANING THE FAN BLADES AND MOTOR

If necessary, clean the fan blades and motor with a soft cloth. If it is necessary to wash the fan blades, cover

the fan motor to prevent moisture damage.

CLEANING THE INTERIOR OF UNIT

• When cleaning the cabinet interior, use a solvent of warm water and mild soap.

• Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the stainless steel

surface.

If your appliance develops a fault, please check the following table before call Omcan.

Fault Probable Cause Action

Compressor Not

Running

Fuse blown or circuit breaker tripped. Replace fuse or reset circuit breaker.

Power cord unplugged. Plug in power cord.

Thermostat set too high. Set thermostat to lower temperature.

Cabinet in defrost cycle. Wait for defrost cycle to nish.

Condensing Units

Run For Long

Periods of Time

Excessive amount of warm product placed

in cabinet.

Allow adequate time for product to cool

down.

Dirty condenser coil. Clean the condenser coil.

Evaporator coil iced over. Unplug unit and allow coil to defrost. Make

sure thermostat is not set too cold. Ensure

that door gasket(s) are sealing properly.

Cabinet

Temperature is too

Warm

Thermostat set too warm. Set thermostat to lower temperature.

Excessive amount of warm product placed

in cabinet.

Allow adequate time for product to cool

down.

Fuse blown or circuit breaker tripped. Replace fuse or reset circuit breaker.

Dirty condenser coil. Clean the condenser coil.

Evaporator coil iced over. Ensure doors are closed when not in use.

Avoid opening doors for long periods of

time.

13

Parts Breakdown

Model RS-CN-0004-P 46679

Model RS-CN-0006-P 41937

Model RS-CN-0009-P 46680

14

Parts Breakdown

Model RS-CN-0004-P 46679

Item No. Description Position Item No. Description Position Item No. Description Position

AD834 Body for 46679 1 AE140 Bushing for 46679 9 AD825 Condenser Fan for 46679 17

AE133 Glass Fixing Clip for 46679 2 AD820 Unit Room Cover for 46679 10 AD826 Sensor for 46679 18

AF204 Side Glass for 46679 3 AD836 Pan Support for 46679 11 AD827 Unit Board for 46679 19

AE135 Glass Linking Clip for 46679 4 AD819 Power Cord for 46679 12 AD828 Condenser for 46679 20

AE136 Top Glass for 46679 5 AD821 Side Cover for 46679 13 AD829 Main Switch for 46679 21

AE137 Back Glass for 46679 6 AD822 Unit Plate for 46679 14 AD818 Thermostat for 46679 22

AE138 Glass Fixing Screw for 46679 7 AD823 Compressor for 46679 15 AD830 Adjustable Feet for 46679 23

AE139 Glass Linking Clip for 46679 8 AD824 Fan Connection Board for 46679 16

Model RS-CN-0006-P 41937

Item No. Description Position Item No. Description Position Item No. Description Position

AD831 Body for 41937 1 AE140 Bushing for 41937 9 AD825 Condenser Fan for 41937 17

AE133 Glass Fixing Clip for 41937 2 AD820 Unit Room Cover for 41937 10 AD826 Sensor for 41937 18

AF204 Side Glass for 41937 3 AD833 Pan Support for 41937 11 AD827 Unit Board for 41937 19

AE135 Glass Linking Clip for 41937 4 AD819 Power Cord for 41937 12 AD828 Condenser for 41937 20

AE147 Top Glass for 41937 5 AD821 Side Cover for 41937 13 AD829 Main Switch for 41937 21

AE148 Back Glass for 41937 6 AD822 Unit Plate for 41937 14 AD818 Thermostat for 41937 22

AE138 Glass Fixing Screw for 41937 7 AD823 Compressor for 41937 15 AD830 Adjustable Feet for 41937 23

AE139 Glass Linking Clip for 41937 8 AD824 Fan Connection Board for 41937 16

Model RS-CN-0009-P 46680

Item No. Description Position Item No. Description Position Item No. Description Position

AD812 Body for 46680 1 AE140 Bushing for 46680 9 AD825 Condenser Fan for 46680 17

AE133 Glass Fixing Clip for 46680 2 AD820 Unit Room Cover for 46680 10 AD826 Sensor for 46680 18

AF204 Side Glass for 46680 3 AD817 Pan Support for 46680 11 AD827 Unit Board for 46680 19

AE135 Glass Linking Clip for 46680 4 AD819 Power Cord for 46680 12 AD828 Condenser for 46680 20

AE149 Top Glass for 46680 5 AD821 Side Cover for 46680 13 AD829 Main Switch for 46680 21

AE150 Back Glass for 46680 6 AD822 Unit Plate for 46680 14 AD818 Thermostat for 46680 22

AE138 Glass Fixing Screw for 46680 7 AD823 Compressor for 46680 15 AD830 Adjustable Feet for 46680 23

AE139 Glass Linking Clip for 46680 8 AD824 Fan Connection Board for 46680 16

15

Electrical Schematics

Model RS-CN-0004-P 46679

Model RS-CN-0006-P 41937

Model RS-CN-0009-P 46680

16

Notes

________________________________________________________________________________________

17

Notes

________________________________________________________________________________________

18

Notes

________________________________________________________________________________________

19

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o󰀨 the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour di󰀨usion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 5,000 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 5,000 productos con origen a nivel mundial.

Omcan RS-CN-0004-P User manual

Popular Commercial Food Equipment manuals by other brands