Omcan FR-CN-0160-S User manual

Revised - 11/14/2019
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com
Ice Cream Dipping Freezers
Models FR-CN-0160-S, 0360-S, 0460-S
Items 44590, 44588, 44589
Instruction Manual

2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 6
-------------------------------------------------------------------------- 6
--------------------------------------------------------------------------------------- 6 - 7
--------------------------------------------------------------------------------------------- 7
------------------------------------------------------------------------------------ 7 - 8
-------------------------------------------------------------------------------- 8 - 9
---------------------------------------------------------------------------- 10 - 15
---------------------------------------------------------------------------- 16
------------------------------------------------------------------------------------------- 17 - 18
--------------------------------------------------------------------------- 19
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Notes
Warranty Registration
Model FR-CN-0160-S / Model FR-CN-0360-S / Model FR-CN-0460-S

3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

4
Safety and Warranty
General Information
CAUTION FOR USING
1. Unpack all packages before using the showcase. Don’t bend it over more than 60° while moving it.
2. The showcase should be installed in the environment of good ventilation, Cool and dry and without
corrosive gas. It should not be installed close to heat sources or directly under the sunlight. The space
more than 10cm between the wall of the front and the back of the showcase should be allowed. When
installing, the universal wheels should be padded well. So as to make the showcase be level and stable, or
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.

5
Safety and Warranty
it will cause vibration and too much noise.
3. When initial operation, the refrigerator should run empty for about one hour before storing food in it.
4. Before placing food into the freezer, adjust the temperature control to the lowest point (highest number) and
let it run until the temperature of inner cabinet decreases to 0°F. Put the food in, and after 12 hours adjust
the temperature control to the normal point.
5. The thermostat could adjust the temperature inside the showcase. When you turn the knob in clockwise.
The bigger the gure, the lower the temperature. Generally, the position of ‘4’ is suitable. ‘0’ position stand
for stopping operation. ‘Max’ position will be operating not continually as compressor won’t stop (no cycle).
Turn the temperature control to the “4” or “5” when temperature inside is stable for ice cream and similar
products.
6. Never store ammable, explosive or corrosive products in the freezer, and keep the freezer away from such
materials.
7. If power is cut o󰀨, wait at least 5 minutes before turning on again to avoid damage to the compressor.
8. To save energy, the door should not be frequently opened for left open for a long time.
9. The surface and the inside of the showcase should be dry and clean. Long term moisture with cause the
showcase rust slowly. (There will be some stains on the surface.)
10. Periodical cleaning is suggested for your reference. Generally, 30-45 days once is best. When cleaning, it
is best to wipe the inside and the surface of the showcase with the soft cloth with neutral soap or detergent.
Attention: To ensure safety, the power plug must be pulled out before cleaning. All safety precautions
must be followed. Dispose of properly in accordance with Federal or local regulations. Risk of re or
explosion due to puncture of refrigerant tubing. Follow handling instructions carefully.
DANGER: Risk of re or explosion. Flammable refrigerant R290 used. To be repaired only by trained
service personnel. Do not use mechanical devices to defrost refrigerator. Do not puncture refrigerant
tubing.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without di󰀩culty.
In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated
waste) according to the current norms.

6
Technical Specications
Installation
Model FR-CN-0160-S FR-CN-0360-S FR-CN-0460-S
Climate Type N/ST
Freezer Capacity 120 L / 4.2 cu.ft. 290 L / 10.2 cu.ft. 370 L / 13.1 cu.ft.
Temperature Range ≤-26°C / (-15°F)
Refrigerant R290
Compressor HP 1/4+ 2/5+ 1/2+
Amps 3 4
Tub Load Quantity 4 displayed + 2 stored 8 displayed + 6 stored 10 displayed + 8 stored
Weight 154.3 lbs. / 70 kgs. 242.5 lbs. / 110 kgs. 280 lbs. / 127 kgs.
Dimensions 26.2” x 28.1” x 34.4”
665 x 715 x 875mm
49.6” x 28.1” x 34.4”
1260 x 715 x 875mm
60.2” x 28.1” x 34.4”
1530 x 715 x 875mm
Item Number 44590 44588 44589
GLASS CANOPY ASSEMBLY
INCLUDED HARDWARE
• 1 - Front Rail.
• 2 - Side Rails.
• 4 - Metal Plate for Side Rails.
• 8 - L-Shaped Brackets.
• 11 - Screws and Metal Washers for Rails.
• 20 - Fasteners for Glass Panels.
Note: If the fasteners are loose after assembling, you may fasten it with the white washer.
1. Install the 3 plastic channels along the sides and front of the cabinet using the Phillips screws and metal
washers. A short channel should be installed on each side, and the long channel should be installed on the
front.
2. Insert the side glass panel into the side channel. Attach a metal plate to the cabinet at both ends of the
channel, using the Phillips screws and metal washers. Then, attach each of the metal plates to the side
glass panel using the socket head screws, metal washers, and associated metal fasteners. Repeat this
step on the other side of the cabinet.
Safety and Warranty
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

7
Installation
Operation
Maintenance
3. Insert the front glass panel into the front channel. Then, use the L-shaped brackets and the fasteners to
attach the front glass panel to each of the side panels. There are two bracket mounting locations on each
side; one at the top, and one at the bottom.
4. Install the gasket on the top edge of the front glass panel, and place top glass panel atop the front and side
panels.
5. Use the style of L-shaped brackets and fasteners referenced in Step 3 to attach the top glass panel to each
of the side glass panels. There are two bracket mounting locations on each side; one at the front, and one
at the back.
FOOD STORAGE
• Do not ll the freezer full of products. You should leave space between items and the inner surface of the
cabinet, so as to keep good ventilation of cold air and freeze evenly. Do not put in any bottled or canned
beverage with freezing point above the temperature in the cabinet when it is below zero.
• For foods that should be moisture-free or lose water easily, wrap them up with hermetical food bags or
fresh lms before putting in the cabinet for the sake of avoiding smell-mixing and reducing frosting.
• Storage of volatile and combustible gases, liquids such as strong alkalies, strong acids, petrol ,etc. is
forbidden.
• Never put hot food directly in the freezer. Food should be cold or frozen before placing it inside.
• The cabinet is intended exclusively for the storage and/or display of packaged foods only.
• The freezer should be cleaned regularly. When cleaning, turn o󰀨 the power, take out the food in the cabinet,
clean the inside using water or a little neutral detergent.
• Do not use boiling water, acid, chemical diluents, petrol and oil, or dirt-removing powder.
• Dry it after cleaning.
• Use light soap water when cleaning the door seal, apply a little of talcum powder on it after natural drying to
extend its service life.
• Use soft cloth with water or a little detergent to clean the out surface. Note, keeping the power supply and
lower part of connect wires away from water to avoid electricity leakage.
• Except common breakdowns, those who are not service technician should not take apart and repair the
freezer on their own so as to avoid worsening the trouble. Unauthorized repair of electrical part such as
compressor, temperature controller is forbidden.
DEFROSTING
• Defrost for better freezing e󰀩ciency when the frost lm in the cabinet is 4-5mm thick.
• When defrosting, turn o󰀨 the power, take out the frozen foods, open the door for warming and melting. Use
a soft cloth to absorb water and clean it up.

8
Troubleshooting
Maintenance
Problem Possible Cause Solution
The indicator is not on.
The compressor does not start.
The plug isn’t fully connected to
the socket.
Replug it.
No power. Connect the socket with power.
The indicator is on, but the
compressor doesn’t work and
buzzes only.
The power voltage is <98V. Put a power-regulater more than
1000W power together.
The compressor stops a minute
after start, and restart after a few
minutes, and so repeatedly.
The power voltage is >132V. Put a power-regulater more than
1000W power together.
The compressor works normally,
but the temperature in the cabinet
lowers too slowly.
The door is opened too frequently. Reduce open times.
The food in the cabinet is too
much, or placed improperly.
Place foods properly, keep space
between them for ventilation of
cold air.
The frost lm is too thick. Take out foods and defrost.
The surface of the condenser is
too dirty.
Stop and clean the condenser.
The door seals badly. Adjust the door seal.
The noise is too loud. The freezer is placed unstably. Place it stably.
The xing of the freezer is loose. Tighten the xing.
There’s contact between pipes. Separate them.
THE FOLLOWING ARE NOT FAULTS:
• When the freezer is working or after stopping for a while, the refrigerant in the pipes is cycling and gives out
“running water” sounds.
• The surface temperature of the compressor may be up 70~80°C when it is working.
• The back side of step freezer gives out heat.
• In rainy season, the outer surface of the cabinet may have dew, which makes no defects on normal use.
Just dry it with a piece of cloth.
• Do not use sharp metal tools such as steel brush to clean the frost lm when defrosting so as to avoid
evaporator damage.

9
Troubleshooting
REFERENCE
Item Number Model Number Description Manufacturer Model Number
44590 FR-CN-0160-S
Flat Sneeze Guard Ice Cream Dipping
Freezer 26” 110V/60/1
cETLus/ETL Sanitation
RI-160DC
44588 FR-CN-0360-S
Flat Sneeze Guard Ice Cream Dipping
Freezer 49” 110V/60/1
cETLus/ETL Sanitation
RI-360DC
44589 FR-CN-0460-S
Flat Sneeze Guard Ice Cream Dipping
Freezer 60” 110V/60/1
cETLus/ETL Sanitation
RI-460DC

10
Model FR-CN-0160-S 44590
Parts Breakdown

11
Item No. Description Position Item No. Description Position Item No. Description Position
69421 Upper Glass Door for RI-160DC 1 28445 Caster with Lock for RI-160DC 9 64768 Fan Motor Support for RI-160DC 18
41162 Key/Lock for RI-160DC 2 28449 Thermostat for RI-160DC 12 28446 Castor without Lock for RI-160DC 19
69422 Lower Glass Door for RI-160DC 3 64766 Thermostat Support for RI-160DC 13 78720 Compressor Support for RI-160DC 20
31440 Basket for RI-160DC 4 39587 Indicator Lamp for RI-160DC 14 28447 Shutter for RI-160DC 22
64763 Thermostat Cover for RI-160DC 5 39586 Filter for RI-160DC 15 28448 Plug for RI-160DC 23
64769 Cabinet Plastic Frame for RI-160DC 7 64441 Filter Support for RI-160DC 16 63504 Compressor (R290) for RI-160DC 24, 25
28453 Condenser for RI-160DC 8 64767 Fan Motor for RI-160DC 17
Item No. Description Position Item No. Description Position Item No. Description Position
AC116 Front Rail for RI-160DC AC120 Screws and Metal Washers for Rails for
RI-160DC AC124 Front Glass for RI-160DC
AC117 Side Rail for RI-160DC AC121 Fasteners for Glass Panels for RI-160DC AC125 Top Glass for RI-160DC
AC118 Metal Plate for Side Rails for RI-160DC AC122 Gasket of Glass for RI-160DC
AC119 L-Shaped Bracket for RI-160DC AC123 SIDE GLASS FOR RI-160DC
Model FR-CN-0160-S 44590
Glass Sneeze Guard
Parts Breakdown

12
Model FR-CN-0360-S 44588
Parts Breakdown

13
Parts Breakdown
Model FR-CN-0360-S 44588
Item No. Description Position Item No. Description Position Item No. Description Position
69423 Upper Glass Door for RI-360DC 1 28449 Thermostat for RI-360DC 12 28446 Castor without Lock for RI-360DC 19
41162 Key/Lock for RI-360DC 2 64766 Thermostat Support for RI-360DC 13 78720 Compressor Support for RI-360DC 20
69424 Lower Glass Door for RI-360DC 3 39587 Indicator Lamp for RI-360DC 14 28447 Shutter for RI-360DC 22
64763 Thermostat Cover for RI-360DC 5 39586 Filter for RI-360DC 15 28448 Plug for RI-360DC 23
64772 Cabinet Plastic Frame for RI-360DC 7 64441 Filter Support for RI-360DC 16 63503 Compressor (R290) for RI-360DC 24, 25
37874 Condenser for RI-360DC 8 28454 Cooling Fan Motor for RI-360DC 17
28445 Caster with Lock for RI-360DC 9 64768 Fan Motor Support for RI-360DC 18
Item No. Description Position Item No. Description Position Item No. Description Position
AC126 Front Rail for RI-360DC AC120 Screws and Metal Washers for Rails for
RI-360DC AC128 Front Glass for RI-360DC
AC117 Side Rail for RI-360DC AC121 Fasteners for Glass Panels for RI-360DC AC129 Top Glass for RI-360DC
AC118 Metal Plate for Side Rails for RI-360DC AC127 Gasket of Glass for RI-360DC
AC119 L-Shaped Bracket for RI-360DC AC123 Side Glass for RI-360DC
Glass Sneeze Guard

14
Parts Breakdown
Model FR-CN-0460-S 44589

15
Parts Breakdown
Model FR-CN-0460-S 44589
Item No. Description Position Item No. Description Position Item No. Description Position
69425 Upper Glass Door for RI-460DC 1 69432 Thermostat for RI-460DC 12 69439 Casters without Brakes for RI-460DC 19
69426 Key for RI-460DC 2 69433 Thermostat Support for RI-460DC 13 69440 Compressor Panel for RI-460DC 20
69427 Lower Glass Door for RI-460DC 3 69434 Indicator Lamp for RI-460DC 14 69441 Side Panel for RI-460DC 22
69428 Thermostat Cover for RI-460DC 5 69435 Filter for RI-460DC 15 69442 Power Cord for RI-460DC 23
69429 Cabinet for RI-460DC 7 69436 Filter Support for RI-460DC 16 69443 Compressor R290 for RI-460DC 24, 25
69430 Condenser for RI-460DC 8 69437 Fan Motor for RI-460DC 17
69431 Casters with Brakes for RI-460DC 9 69438 Fan Motor Support for RI-460DC 18
Item No. Description Position Item No. Description Position Item No. Description Position
AC130 Front Rail for RI-460DC AC120 Screws and Metal Washers for Rails for
RI-460DC AC132 Front Glass for RI-460DC
AC117 Side Rail for RI-460DC AC121 Fasteners for Glass Panels for RI-460DC AC133 Top Glass for RI-460DC
AC118 Metal Plate for Side Rails for RI-460DC AC131 Gasket of Glass for RI-460DC
AC119 L-Shaped Bracket for RI-460DC AC123 Side Glass for RI-460DC
Glass Sneeze Guard

16
Model FR-CN-0160-S 44590
Model FR-CN-0360-S 44588
Model FR-CN-0460-S 44589
Electrical Schematics

17
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________

18
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________

19
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o󰀨 the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
https://omcan.com/warranty-registration/
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No

Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour di󰀨usion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 5,000 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 5,000 productos con origen a nivel mundial.