Omcan Pg-cn-0711-ft User manual

Revised - 04/20/2022

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

Panini Grill

Model PG-CN-0711-FT

Item 42913

Instruction Manual

2

Page

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 5

-------------------------------------------------------------------------- 6

--------------------------------------------------------------------------------------- 6 - 7

--------------------------------------------------------------------------------------------- 7

----------------------------------------------------------------------------------------- 8

----------------------------------------------------------------------------- 9 - 10

---------------------------------------------------------------------------- 11

------------------------------------------------------------------------------------------- 12 - 14

---------------------------------------------------------------------------- 15

Table of Contents

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model PG-CN-0711-FT

3

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

4

General Information

Safety and Warranty

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para

salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

SAFETY

Please take notice that the unit will still be too hot to handle immediately after use.

The contact grill has a thermal cut-o󰀨 safety device to avoid over heating.

If the power cord is damaged, it must be replaced by qualied technician.

5

Safety and Warranty

SAVE THIS INSTRUCTIONS

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure

or other damages resulting from installation in non-commercial or residential applications. The right

is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as

possible.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop o󰀨 to either

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of

without di󰀩culty.

In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

6

Technical Specications

Installation

Take out the contact grill from the packaging and locate the unit on a rm level surface.

When this appliance is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative

nished, etc., it is recommended that they be made of non-combustible material, if not, they shall be clad with

a suitable non-combustible heat-insulating material, and that the closet attention be paid to re prevention

regulations.

PROGRAMMABLE TIMER INSTRUCTIONS

Note: Be sure the unit is unplugged and cool prior to installing or removing the programmable timer.

1. Installing the batteries - 2pcs AAA 1.5V battery.

Place your ngers on the two tabs on the sides of the timer and rmly depress and pulling towards you,

the timer is released from the unit, then open battery box cover, install batteries in, then slide battery cover

back into the position. Check timer to ensure power is supplied by pressing “-”. Insert timer into the port

until side tabs lock into place.

2. Programming the timer.

Note: The timer will not automatically shut o󰀨 your unit. Once your programmed time has lapsed,

the unit will beep 5 times and the screen will go blank.

PROGRAM MANUALLY

To manually program the timer, hold both “-” and “+” at the same time for four seconds. The timer will beep

twice. After the second beep, use the “-” and “+” to scroll to your desired time setting up to 19:59. For fast

scroll, hold the button down until you have reached your desired time setting. The timer will automatically

Model PG-CN-0711-FT

Grill Surface 10” x 18” / 254 x 457mm

Thermostat Control 60 - 300°C / 140 - 572°F

Power 3200W

Electrical 220V / 60Hz / 1

Top Grill Smooth

Bottom Grill Smooth

Dimensions 19” x 15.4” x 10” / 483 x 391 x 254mm

Packaging Dimensions 20” x 23” x 14” / 508 x 584 x 356mm

Weight 70 lbs. / 31.8 kgs.

Packaging Weight 72.6 lbs. / 32.9 kgs.

Item Number 42913

7

Installation

Operation

program the setting after ve seconds. Now that you have programmed your time, you may press the “-” button

any time to start the timer. Once programmed, the timer will always default to the time setting until otherwise

changed.

PROGRAM USING COUNT-UP MODE

Your programmable timer allows you to program your time using count-up mode. This is convenient for when

you need to rst measure the time required to grill your sandwich before programming. Once you have started

grilling, press the “+” button to start the timer. When you have nished grilling, press both “-” and “+” to set the

time. Once programmed, the timer will always default to this time setting until otherwise changed.

Note: When batteries are removed, the timer automatically defaults to the factory setting of 10

seconds.

BEFORE FIRST USE

Initial Burn-O󰀨 of Factory Sediments and Seasoning/Curing of Cast Iron Plates:

1. Place grill in a well-ventilated area under an exhaust hood.

2. Remove protective paper from grill surface.

3. Plug grill in, turn thermostat knob to maximum setting and switch the unit ON with top grill plate in closed

position. This will dry o󰀨 any remaining moisture and will burn o󰀨 all factory sediments from grill and on grill

surfaces. The unit will visibly smoke as it continues the burn-o󰀨.

4. When burn-o󰀨 has completed (smoking has ceased), turn the unit OFF, open grill fully and allow to cool for

about an hour.

5. Clean grill surface with cleaning brush using cleaning liquid and hot water. Rinse and dry thoroughly.

6. When unit has cooled, apply a very thin, even layer of shortening, fat or lard to the surface of the top and

bottom grill plates.

NOTE: Liquid vegetable oil can also be used, but should rst dry to the surface before cleaning the

cast iron plate thoroughly is advised. Warm up the cast iron plate for 10 minutes until all smoke

and/or odor has dissipated. Switch o󰀨 and unplug the unit, then use warm, soapy water to clean.

NEVER USE COLD WATER ON THE HOT PLATE.

Always preheat the grill before use until the ready light illuminates.

Lift the top grill plate, arrange food on the bottom plate and bring top plate back down to make contact with

food and begin cooking. If additional sandwiches are desired, lower the lid to preserve the heat while you

prepare the additional sandwiches. When not cooking, the thermostat is turned o󰀨, switch o󰀨 the on/o󰀨 switch,

unplug the unit.

8

Maintenance

Be sure to always wash the grill plates after each use to remove any residue that may have accumulated.

For cleaning cast iron plate, please use warm soapy water while still warm. Do not use cold water on hot plate.

After cleaning, be sure the oil tray must be dry thoroughly before putting them back to the unit.

Do not immerse completely in water or any liquid to clean.

The appliance is not to be cleaned with a water jet.

HELP

If the contact grill does not work, please check the following:

1. The power supply is correct and switched on.

2. The positions of switch and thermostat are correct.

9

Parts Breakdown

Model PG-CN-0711-FT 42913

10

Parts Breakdown

Model PG-CN-0711-FT 42913

Item No. Description Position Item No. Description Position Item No. Description Position

AJ451 Lid for 42913 01 AJ458 Thermo Cut Out for 42913 08 AJ465 Timer for 42913 15

AJ452 Big Handle for 42913 02 AJ459 Plug and Lead for 42913 09 AJ466 Thermostat for 42913 16

AJ453 Rear Cover for 42913 03 AJ460 Body for 42913 10 AJ467 Oil Tray for 42913 17

AJ454 Top Element for 42913 04 AJ461 Bottom for 42913 11 AJ468 On/Off Switch for 42913 18

AJ455 Top Cast Iron for 42913 05 AJ462 Foot for 42913 12 AJ469 Small Handle for 42913 19

AJ456 Bottom Cast Iron for 42913 06 AJ463 Dial for 42913 13 AJ470 Spring for 42913 20

AJ457 Bottom Element for 42913 07 AJ464 Indicator Light for 42913 14

11

Electrical Schematics

Model PG-CN-0711-FT 42913

12

Notes

________________________________________________________________________________________

13

Notes

________________________________________________________________________________________

14

Notes

________________________________________________________________________________________

15

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o󰀨 the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour di󰀨usion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 6,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 6500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 6,500 productos con origen a nivel mundial.

Omcan PG-CN-0711-FT User manual

Popular Grill manuals by other brands