Omcan PG-CN-0711-RT User manual

Sandwich Grill with Timer
Model PG-CN-0711-RT
Item 42914
Instruction Manual
Revised - 08/11/2017
Toll Free: 1-800-465-0234
Fax: [phone]
Email: [email protected]
www.omcan.com

2
Table of Contents
Model PG-CN-0711-RT
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 5
-------------------------------------------------------------------------- 6
-------------------------------------------------------------------------------------------- 6
----------------------------------------------------------------------------------------- 6 - 7
------------------------------------------------------------------------------------ 7 - 8
------------------------------------------------------------------------------- 8 - 9
---------------------------------------------------------------------------- 10
---------------------------------------------------------------------------- 11
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Parts Breakdown
Electrical Schematics
Warranty Registration

3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.

4
Safety and Warranty
General Information
WARNING
PLEASE READ THE USER MANUAL CAREFULLY BEFORE OPERATING THE MACHINE
This manual has been prepared to enable the correct installation, regulation and maintenance of the unit. It
is therefore of basic importance that the warnings contained in this booklet are carefully read as they supply
essential indications regarding the safety of the installation, use and maintenance. The appliance must be
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.

5
Safety and Warranty
installed, tested and serviced by qualied personnel only. Any adjustment whatsoever not expressly authorized
and in disrespect of this manual voids the warranty. Observe all existing local regulations at the time of
installation. The packing materials (plastic bags, polystyrene, nails, etc.) as potential hazards, must be kept out
of the reach of children and properly recycled according to the existing local regulations. For repairs contact
Omcan and request the use of original spare parts. If in doubt do not use the appliance and contact Omcan.
Not following the above conditions could risk the safety of those using the unit.
Caution:
- Please take notice that the unit will still be too hot to handle immediately after use.
- The Contact Grill has a thermal cut-off safety device to avoid over heating.
- If the power cord is damaged, it must be replaced by qualied technician.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

6
Always preheat the grill before use until the ready light illuminates. Lift the top grill plate, arrange food on
the bottom plate and bring top plate back down to make contact with food and begin cooking. If additional
sandwiches are desired, lower the lid to preserve the heat while you prepare the additional sandwiches. When
not cooking, the thermostat is turned off, switch off the on/off switch, unplug the unit
If the Omcan Grill does not work, please check the following:
1. The power supply is correct and switched on.
2. The positions of switch and thermostat are correct.
RE-PROGRAMMABLE TIMER INSTRUCTIONS
Note: Be sure the unit is unplugged and cool prior to installing or removing the re-programmable timer.
Operation
Installation
Technical Specications
The griddle should be placed on a solid leveled surface. If the unit is placed in close proximity to a wall,
partitions, kitchen furniture, decorative nish, etc. it is recommended that they be made of non-combustible
material. If not, they should be clad with a suitable non-combustible heat-insulating material and re prevention
regulations should be enforced.
Make sure to perform a thorough cleaning of the grill before rst operation to ensure that no residual
chemicals are present when cooking.
Model PG-CN-0711-RT
Grill Surface 10” x 18” / 254 x 457mm
Power 3200W
Thermostat Control 60 - 300°C / 140 - 572°F
Electrical 220V / 60Hz / 1
Top Grill Ribbed
Bottom Grill Ribbed
Weight 73 lbs. / 33.1 kgs.
Dimensions 22” x 15.4” x 9.4” (Close) / 22” x 15.4” x 22.25” (Open)
557 x 390 x 238mm (Close) / 557 x 390 x 572mm (Open)
Item Number 42914

7
Maintenance
1. Installing the batteries
• Place your ngers on the two tabs on the sides of the timer and rmly depress and pulling towards you,
the timer is released from the unit, then open battery box cover, install batteries in, then slide battery cover
back into the position.
• Check timer to ensure power is supplied by pressing “-”.
• Insert timer into the port until side tabs lock into place.
2. Programming the timer
Note: The timer will not automatically shut off your unit. Once your programmed time has lapsed, the
unit will beep 5 times and the screen will go blank.
Program manually
To manually program the timer, hold both “-” and “+” at the same time for four seconds. The timer will beep
twice. After the second beep, use the “-” and “+” to scroll to your desired time setting up to 19:59.
For fast scroll, hold the button down until you have reached your desired time setting. The timer will
automatically program the setting after ve seconds. Now that you have programmed your time, you may press
the “-” button any time to start the timer. Once programmed, the timer will always default to the time setting
until otherwise changed.
Program using count-up mode
Your re-programmable timer allows you to program your time using count-up mode. This is convenient for
when you need to rst measure the time required to grill your sandwich before programming. Once you have
started grilling, press the “+” button to start the timer. When you have nished grilling, press both “-” and “+” to
set the time. Once programmed, the timer will always default to this time setting until otherwise changed.
Note: When batteries are removed, the timer automatically defaults to the factory setting of 10
seconds.
Once the griddle is placed in a position by consulting International Standards and regulations. Cleaning the
cast iron plate is thoroughly advised.
Warm up the cast iron plate for 10 minutes until all smoke and/or odor has dissipated.
Switch off and unplug the unit, then use warm, soapy water to clean, followed by a rinse with warm water. Be
sure to always wash the grill plates after each use to remove any residue that may have accumulated.
For cleaning cast iron plate, please use warm soapy water while still warm. Do not use cold water on hot plate.
After cleaning, be sure the oil tray must be dry thoroughly before putting it back to the unit. Do not immerse
completely in water or any liquid to clean and the appliance should not be cleaned with a water jet.
Operation

8
Maintenance
NEVER USE COLD WATER ON THE HOT PLATE.
REFERENCE
Item Number Model Number Description Manufacturer Model
Number
42914 PG-CN-0711-RT
Panini Grill 10” x 18” / 254mm x 457mm
Double Rib/Rib with Timer
220V/60/1 cETLus
PA10176T
Parts Breakdown
Model PG-CN-0711-RT 42914
Item No. Description Position Item No. Description Position Item No. Description Position
20337 Big Handle for PA10176T 1 20344 Thermo Cut Out for PA10176T 8 20349 Indicator Light for PA10176T 15
20338 Small Handle for PA10176T 2 20345 Plug and Lead for PA10176T 9 20350 Oil Tray for PA10176T 16
20339 Top Element for PA10176T 3 72220 Handle for PA10176T 10 72221 Timer for PA10176T 17
72215 Top Cast Iron for PA10176T 4 72217 Bottom for PA10176T 11 20351 On / Off Switch for PA10176T 18
72216 Bottom Cast Iron for PA10176T 5 20346 Foot for PA10176T 12 26023 Double Panini Top Cover for PA10176T 19
20342 Bottom Element for PA10176T 6 20347 Thermostat for PA10176T 13
20343 Body for PA10176T 7 20348 Dial for PA10176T 14

9
Parts Breakdown
Model PG-CN-0711-RT 42914

10
Electrical Schematics
Model PG-CN-0711-RT 42914

11
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
www.omcan.com/warrantyregistration.html
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No

Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour diffusion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 3, 500 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 3500
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 3, 500 productos con origen a nivel mundial.