Omcan Of-cn-0023 User manual

Oil Filter

Model OF-CN-0023

Item 44481

Instruction Manual

Revised - 02/28/2022

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

2

Page

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 6

-------------------------------------------------------------------------- 7

--------------------------------------------------------------------------------------- 7 - 9

--------------------------------------------------------------------------------------- 9 - 10

--------------------------------------------------------------------------------------- 11

----------------------------------------------------------------------------------- 12

---------------------------------------------------------------------------- 13 - 14

---------------------------------------------------------------------------- 15

------------------------------------------------------------------------------------------- 16 - 18

---------------------------------------------------------------------------- 19

Table of Contents

Section

General Information

Safety and Warranty

Technical Specications

Installation

Operation

Maintenance

Troubleshooting

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model OF-CN-0023

3

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has su󰀨ered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

4

Safety and Warranty

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury, or

death. Read the installation operating and maintenance instructions thoroughly before installing, or servicing

this equipment.

CAUTION

These models are designed, built, and sold for commercial use only. If these models are positioned so the

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para

salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

General Information

5

Safety and Warranty

general public can use the equipment, make sure that cautions, warnings, and operating instructions are

clearly posted near each unit so that anyone using the equipment will use it correctly and not injure themselves

or harm the equipment.

WARNING

A factory authorized agent should handle all maintenance and repair. Before doing any maintenance or repair,

contact Omcan.

As is the case with most cooking equipment, your shortening lter should be used with caution. Please read

the following warnings to avoid potential injuries.

WARNING

Can cause serious injury or death. Do not attempt to service this equipment unless you are a licensed

electrician or trained technician.

Because this equipment utilizes high voltage, it should only be installed and serviced by a licensed electrician

or trained technician. Attempting to install or service the equipment yourself could result in serious, potentially

fatal injuries.

If an electrical shock is felt when touching equipment, shut o󰀨 power immediately (pull cord or turn o󰀨 circuit

breaker) and call a trained technician for repair. Failure to do so could result in serious, potentially fatal injuries.

Always turn power switch o󰀨 any time equipment is not in use.

CAUTION

Can cause injury, Allow 30 minutes for equipment to cool before attempting to clean.

WARNING

Do not operate equipment with faulty, loose, or missing parts. If you do, personal injury, or damage to

equipment and property could result.

WARNING

Improper installation, alteration, service or death. Read the installation, operating and maintenance instructions

thoroughly before installing or servicing this appliance.

WARNING

Can cause serious injury or damage to equipment, Supervise untrained, young, or handicapped persons.

• This equipment is not intended for use by persons (including children) with reduced physical, sensory,

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the equipment by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the equipment.

• This equipment is intended to be used for commercial applications, for example in kitchens of restaurants,

canteens, hospitals and in commercial enterprises such as bakeries, butcheries, etc., but not for continuous

mass production of food.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

6

qualied persons in order to avoid a hazard.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure

or other damages resulting from installation in non-commercial or residential applications. The right

is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as

possible.

1 YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop o󰀨 to either

an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the

equipment.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of

without di󰀩culty.

In any case, for suitable recycling, we suggest disposing of the products separately (di󰀨erentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Safety and Warranty

7

Remove the Oil Filter from the packaging, ensuring that all protective packaging, plastic and residues are

cleaned from its surfaces. Layout all components of the Oil Filter on the oor ready for assembly. You will need

a Allen key to assist in the assembly process.

1. Remove the plastic cover (2) and tighten the soft pipe (3) to joint (1) and oil gun (4).

Installation

Model OF-CN-0023

Capacity 23 L / 24.3 QT

Power 1/3 HP / 249 W

Filter Speed 13.3 L / 14.1 QT per minute

Electrical 120V / 60Hz / 1

Size of Filter Paper 15.2” x 13.6” / 386 x 346mm

Weight 59.5 lbs. / 27 kgs.

Dimensions 16.9” x 24.2” x 38.2” / 430 x 615 x 970mm

Packaging Weight 70.5 lbs. / 32 kgs.

Packaging Dimensions 28.7” x 20.9” x 20” / 730 x 530 x 510mm

Item Number 44481

Technical Specications

8

2. Take the handle from horizontal position to vertical position and tighten the screws between the handle

base.

3. Remove rubber plug (1) and replace with lter cover (2), put the silicon seal ring (4) into pan and lter net

(3) .and then put the lter paper (5) on lter net. Fix the lter paper by layering (6) and xing column (7).

4. Put the plug into the socket and switch on the power.

WARNING: Do not operate appliance unless all panels and access covers are attached correctly.

Installation

9

This appliance is intended for professional use only and should be operated by fully trained and qualied

personnel. This appliance is intended for indoor use only.

Omcan portable lters are designed to operate primarily as an independent lter unit. Operations always

start by ensuring the unit is properly plugged in, then rolling the lter to the fryer to be ltered. The lter works

directly under the fryers’ drain valves. The general layout of a Omcan portable lter with major components

identied is illustrated below.

5. After work explode the nut (1) and release the oil remainder pipe, cleaned the oil lter paper assembly.

Operation

Installation

10

WARNING

The lter pan should be dry and free of water droplets prior to use. Serious injury could result from hot steam

vapors when hot oil/shortening mixes with water

WARNING

The lter pan maximum capacity is 23L, DO NOT OVERFILL THE FILTER PAN.

WARNING

Ensure the oil is at operating temperature 177°C (350°F), turn the fryer o󰀨.

WARNING

Do not use water jets to clean this equipment. To do so will damage the unit and void the warranty.

WARNING

Do not use the electrical cord as a leash to move the appliance. Series injury and appliance damage can

occur.

WARNING

Do not attempt to move this appliance or transfer hot liquids from one container to another when the unit is at

operating temperature or lled with hot liquids. Serious personal injury could result if skin comes in contact with

the hot surfaces or liquids.

WARNING

Do not overll lter pan with hot oil/shortening. Do not leave appliance unattended while draining or relling

with oil /shortening. Over lling the appliance can cause serious injuries and damage the appliance.

Operation

11

CAUTION

Prior to using equipment for the rst time, perform the daily cleaning procedure listed below.

Note: shortening FILTER must be cleaned DAILY. Failure to do so will void warranty.

1. Disconnect lter hose wand, and drain. Make sure quick disconnect covers are pushed all the way down.

Disconnect lter tube and turn pump on for 3-5 seconds to force shortening from pump. Failure to do this

will cause pump or hose to clog with shortening.

2. Unplug shortening lter.

3. Remove lter tube and clamp assembly. Unscrew wing nuts on lter clamp assembly to remove lter paper

from lter plate. Discard used paper; wash lter plate and thoroughly rinse with hot water: dry well.

4. Remove and wash tank. Rinse and dry thoroughly. Replace tank onto lter.

5. Wash clamp assembly, rinse with hot water, and dry well.

6. Replace lter paper on tube and clamp assembly and install in tank.

WARNING: To prevent the pump from clogging, it is important that both hoses be disconnected from the pump

as soon as the ltering process is completed. Next, turn the pump on for 3-5 seconds, then turn it o󰀨. This

clears any remaining shortening from the pump. The power supply must be disconnected before servicing,

maintaining or cleaning this appliance.

7. The appliance is not jet stream approved. Do not clean the appliance with a water jet.

WARNING

NEVER use the appliance as a step for cleaning or accessing the ventilation hood, Serious injury could result

from slips, trips or from contacting hot liquids.

The contents of the crumb catch and /or lter pan of any lter system must be emptied into a reproof container

at the end of each day. Some food particles can spontaneously combust if left soaking in certain types of oil or

shortening.

If the supplied power cord or receptacle is damaged, it must be replaced by a Authorized Service and Parts

technician, or a similarly qualied person in order to avoid a hazard.

It is recommended that this appliance be inspected by a qualied service technician for proper performance

and operation on a yearly basis.

CAUTION

DO NOT PUMP WATER THROUGH THE FILTER PUMP SYSTEM. THE PUMP FUNCTIONS USING THE

LUBRICATION OF THE OIL AND USING WATER WILL CAUSE DAMAGE TO THE PUMP.

WARNING

DO NOT ATTEMPT TO LIFT FILTER MACHINE OFF FLOOR FOR CLEANING. BODILY INJURY MAY

OCCUR.

WARNING

Never attempt to circulate water through pump. Internal rusting in pump will occur.

Maintenance

12

Problem Cause Remedy

Pump won’t start. Main power supply. Check main power supply.

Plug and lead are damaged. Call Omcan.

Tripped thermal overload switch. Reset the thermal overload switch.

Power switch has not been turned

on.

Check the unit is correctly plugged

in and turned on.

On/o󰀨 switch is faulty. Call Omcan.

Internal wiring fault. Call Omcan.

Pump stops during ltering

process.

Tripped thermal overload switch. Allow lter unit to cool for at least

45 minutes and then press (reset)

the motor thermal overload switch.

Turn lter pump ”OFF”. Allow oil to cool then empty pan.

Verify lter paper is clean and

properly installed. Rell pan and

restart process.

Pump starts and abruptly stops. Tripped thermal overload switch. Reset thermal overload switch.

Pump is blocked or wiring is loose. Call Omcan.

Motor failed. Call Omcan.

Pumping is erratic. The lter paper is not installed. Verify that lter paper is properly

installed under hold-down ring.

The lter hose connection is not

installed.

Verify that lter hose connection is

tight and secure.

Oil not being returned to fry pot. The lter hose is clogged with

debris.

Clear hose.

Clogged lter paper. Scrape o󰀨 excess sediment or

replace lter paper.

Filter pan suction tube is blocked. Use a thin exible wire to unclog.

Troubleshooting

13

Parts Breakdown

Model OF-CN-0023 44481

14

Parts Breakdown

Model OF-CN-0023 44481

Item No. Description Position Item No. Description Position Item No. Description Position

68762 Pan Fixed Plate for 44481 1 68757 Fixed Pole for 44481 13 68764 Connector for 44481 25

68770 Wheel for 44481 2 69230 Oil Filter Basket for 44481 14 AE594 Fixed Plate for 44481 26

68769 Wheel for 44481 3 AE588 Top Cover for 44481 15 68780 Connector for 44481 27

AE584 Body for 44481 4 AE589 Cover Handle for 44481 16 68781 Block for 44481 28

AE585 Oil Gun Assembly for 44481 5 AE590 Reset Button for 44481 17 AE595 Connector for 44481 29

68775 Handle Base Assembly for 44481 6 AE591 Power Cord Box for 44481 18 AE596 Seal Ring for 44481 30

68758 Pan Assembly for 44481 7 68768 Base for 44481 19 68774 Handle for 44481 31

68771 Soft Oil Pipe for 44481 8 68767 Pump Bracket for 44481 20 68777 Switch for 44481 32

AE586 Filter Net for 44481 9 AE592 Pump for 44481 21 AE597 Outlet for 44481 33

AE587 Silicon Seal Ring for 44481 10 68760 Motor for 44481 22 AE598 Control Plate for 44481 34

68754 Filter Paper for 44481 11 68761 Pump Fixed Assembly for 44481 23 AE599 Wire-Wrap Board for 44481 35

68753 Fixation Assembly for 44481 12 AE593 Connector for 44481 24 AE600 Name Plate for 44481 36

15

Electrical Schematics

Model OF-CN-0023 44481

16

Notes

________________________________________________________________________________________

17

Notes

________________________________________________________________________________________

18

Notes

________________________________________________________________________________________

19

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear o󰀨 the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour di󰀨usion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 6,500 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 6500

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 6,500 productos con origen a nivel mundial.

Omcan OF-CN-0023 User manual

Popular Water Filtration System manuals by other brands