Omlet Eglu Cube User manual
eglueglu
t-handle lockt-handle lock
cubecube
Australia 02 8103 4124 [email protected] www.omlet.com.au
Deutschland 0451 8118 9058 [email protected] www.omlet.de
France 04 11 92 12 80 [email protected] www.omlet.fr
Nederland 085 888 3571 [email protected] www.omlet.nl
Italia 0294 752010 [email protected] www.omlet.it
España 0932 201 199 [email protected] www.omlet.es
Sverige 084468 6558 [email protected] www.omlet.se
Norge 06 8 4468 6558 [email protected] www.omlet.no
Polska 22 307 01 69 [email protected] www.omlet.com.pl
Australia 02 8103 4124 [email protected] www.omlet.com.au
Deutschland 0451 8118 9058 [email protected] www.omlet.de
France 04 11 92 12 80 [email protected] www.omlet.fr
Nederland 085 888 3571 [email protected] www.omlet.nl
Italia 0294 752010 [email protected] www.omlet.it
España 0932 201 199 [email protected] www.omlet.es
Sverige 084468 6558 [email protected] www.omlet.se
Norge 06 8 4468 6558 [email protected] www.omlet.no
Polska 22 307 01 69 [email protected] www.omlet.com.pl
You will need...
2 - 3 mm
5/64, 3/32, 7/64 ”
T-Handle Lock
Screw Cap L
810.0443
x2
What you have received
Self Tapping Screw
4x8mm
800.0184
x4
T-Handle Lock Body
810.0439
x2
T-Handle Lock
Screw Cap R
810.0444
x2
064.0162: T-Handle Lock Fixings Pack
064.0164: T-Handle Lock
Before you start, remove
all panels with T-handles
from the Eglu Cube and
place them face up on a
flat, stable surface. Repeat
each step on both of the
Eglu Cube panels.
064.0012
064.0008
810.0439
Repeat on other side
Repeat on other side
Drill through the first surface only and
not through the back of the panel
2 - 3 mm
5/64, 3/32, 7/64 ”
800.0184
x2
Do not overtighten
810.0443 810.0444
Other manuals for Eglu Cube
10
This manual suits for next models
1
Other Omlet Lock manuals
