omnicharge Omni 20c+ User manual

Omni 20c+

0.00 W
20.3 °C
100%
C
45.00 W
0.00 W
To make sure the battery reading is correct, please calibrate the Omnicharge battery when
you first receive the product and periodically in the future.
1. Fully discharge your Omnicharge until the screen turns off. Press the Power Button and
you should see an empty battery icon on the screen.
2. Fully charge your Omnicharge to 100% to finish the calibration.

4
7
Note: For optimal wireless charging, place phone
horizontally towards the back of the Omnicharge.
4. USB-C Port / 60W Port
5. USB-C / HUB Port / 100W Port
6. 5V/3A USB-A Ports
7. Wireless Charging
1. Power Button
2. HUB Button
3. USB-C Output Button

5
0.00 W
20.3 °C
100%
C C
45.00 W
0.00 W
1. Status Icons
2. Input wattage / output voltage through the left USB-C port
3. Output wattage from the bttery
4. Battery percentage remaining
5. Input wattage / output voltage through the right USB-C port
6. Battery temperature
Short press: Enable or disable the input and output of both USB-C ports.
Note: When you are pass-through charging, the battery output field will show a lower value and can even
show 0W output, since the output field is showing how much power is output from the battery and not
how much is output from the port.

6
Wireless Charging
Wireless charging is active.

7
BUTTON LIGHT
BUTTON LIGHT
1. SCREEN OFF TIMER
2. AUTO SHUT OFF TIMER
Set the power auto shut-off timer here. The default setting is 5 min.
Set the screen auto shut-off time here. The default setting is 5 min.
While the screen is on double press the power button to enter the menu
When in the menu, navigate up and down using the buttons on the right of
the screen. Use the power button to enter the selected menu item.

8
BUTTON LIGHT
BUTTON LIGHT
DEFAULT ON
DEFAULT OFF
3. TEMPERATURE
Choose whether your temperature is displayed in celcius or fahrenheit
4. BUTTON LIGHT
Choose whether the button lights are on or off. The default setting is on.
5. ABOUT
Find the model name, capacity, firmware version, and serial number information here.
BUTTON LIGHT
3.
4.
5.
Omni 20c+

9
100W
120W
120W
Note: make sure the Omnicharge is powered on before plugging in your device. Otherwise your device
will power the Omnicharge

10
HOW TO RECHARGE YOUR OMNICHARGE
Plug in a USB-C wall charger and it will start recharging the Omni 20c+
Use the Omnicharge as a USB hub and transfer files
between your smartphones, flash drives, cameras or laptops
2. Initiate HUB mode by short pressing the HUB
button (bottom button), and a HUB icon will appear
on the screen. The secondary USB-C port (left side)
and the 2 USB-A ports can be used to transfer files
from smartphones, flash drives, cameras or other
standard USB-A or USB-C devices.
1. Connect the USB-C/HUB port (on the
right side) to a USB-C port on your laptop.