Omnitron Systems Technology OST iConverter 4Tx User manual

iConverter
iConverter®4Tx
4-Port 10/100BASE-TX Managed Ethernet Switch
iConverter
TheiConverter 4Tx10/100EthernetSwitchmoduleisamember
ofthe managed iConverter productfamily. The4Tx provides a
compact 4-Port 10/100 Ethernet switch that is expandable
across the iConverter 19-Module, 5-Module and 2-Module
chassis backplanes, as well as being supported as a
standalone switch with the iConverter 1-Module Chassis.
The iConverter 4Tx UTP ports feature 10/100Mbps, Half or
Full-Duplex and auto-negotiation with both hardware and
software controls. Hardware control is available for two ports
whileallfour portsare undersoftware controlfor thesefeatures.
RJ-45crossover support eliminatesneed for acrossover cable
and facilitates connectivity to different types of network
equipment. The 4Tx crossover switch is supported on Port 1.
Ports 2, 3 and 4 support an automatic crossover detection
mode. The 4Tx also features two Ethernet backplane ports to
provideconnectivityto adjacentmodules fornetwork expansion
and for in-band connectivity to an iConverter Network
ManagementModule.
4Tx enhanced features include Port VLAN which allows
complete control of traffic flow between a module’s ports, and
PortAccess Control which incorporates remote enabling and
disablingof each individual port.The4Tx supports reporting of
MIBstatisticsthatareavailablefor32variablesperport,reporting
a wide range of real-time packet statistics to provide
performanceand operationalmonitoring.
iConverter 4Txmodulesarehot-swappableandcanbemounted
ina19-Module (2Uhigh) or5-Module (1Uhigh) rack-mountable
chassis(19-inch or23-inch)with anycombinationof redundant
AC,24VDCor48VDCpowersupplies.Theycanalsobemounted
in a 2-Module AC or 18 to 60VDC powered chassis, or in a
1-ModuleAC/DCpowered chassis.
The iConverter 4TxManaged Ethernet Switch supports
10BASE-Tor 100BASE-TX on fourUTP ports
Enhanced features include Port VLAN, Port Access
Control and MIB Statistics
Multiple 4Tx modules can be installed to expand the
port concentration in a single chassis
SupportsHalf or Full-Duplex andauto-negotiation
RJ-45crossover support eliminates needfor
differentcables in connecting to various devices
Ethernet backplane ports for connectivity to adjacent
modules
Management is available with the addition of a
management module to the chassis
SNMPmanagement via NetOutlook™providesreal-time
port and module information, remote parameter
configurationand trap notification
Conformsto IEEE 802.3, 10BASE-T and 100BASE-TX
specifications
Modules are hot-swappable in 19-Module, 5-Module,
2-Moduleor 1-Module chassis
LifetimeWarranty and free 24/7TechnicalSupport

800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [email protected] • 140 Technology Dr. • Irvine, CA 92618
Trademarksareowned bytheir respectivecompanies. iConverterisa registeredtrademark ofOmnitron SystemsTechnology,Inc.
NetOutlook isa trademarkof OmnitronSystemsTechnology,Inc. Specificationssubject tochange withoutnotice.
©2003-2007Omnitron SystemsTechnology,Inc. All rightsreserved.
091-18480-004E 9/07
Managementisaccomplished byusing aNetworkManagement
Module (NMM) or a media converter with integrated management
(such as an iConverter 10/100M2) that provides monitoring,
remote configuration and trap notification. The management
modulecan beaccessed via SNMP,Telnetandviaa serialport.
TheSNMP-basedmanagement isaccomplishedvia Omnitron’s
intuitive,graphic-oriented NetOutlook management software or
third party SNMP management software, while the Telnet and
theserialinterfaceshave aneasy-to-use,menu-driveninterface.
Some of the real-time 4Tx parameters that can be monitored
include link and data receive status. Other parameters include
moduletypeand model,hardware andsoftwarerevisions, serial
numbersandauser-defined identifier.
Theusercan overridethe 4Txmodule’s physicalswitch settings
byusingSNMPorTelnet toremotelyconfigure switch-selectable
parameters such as auto-negotiation, Half or Full-Duplex and
BackplaneSelection.
InadditiontoallstandardiConverter SNMPtrapssuchasmodule
insertion and removal, the 4Tx modules can generate traps on
port state changes including link-up and link-down. Trap
monitoring of specific events can be selectively enabled or
disabledby the network administrator.
Configuration 19-Module 5-Module 2-Module 1-Module
AC 24VDC 48VDC AC 24VDC 48VDC AC 18-60
VDC US AC Universal AC
One (1) Power Supply 8200-1 8206-1 8205-1 8220-1 8226-1 8225-1 8230-0 8235-0 8240-1 8240-2
One (1) Power Supply
w/ Dying Gasp Support -- -- -- -- -- -- 8230-1 8235-1 8241-1 8241-2
Two (2) Power Supplies 8200-2 8206-2 8205-2 8220-2 8226-2 8225-2 -- -- 8245-111* 8245-112*
Three (3) Power Supplies 8200-3 8206-3 8205-3 -- -- -- -- -- -- --
Spare Power Supply 8200-9 8206-9 8205-9 8220-9 8226-9 8225-9 -- -- -- --
23" Rack Mounting Kit 8091-2 8091-2 8091-2 8092-2 8092-2 8092-2 -- -- -- --
Blank Module Panel 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 8090-0 -- --
Wall-Mounting Hardware Kit -- -- -- -- -- -- 8249-0 8249-0 8249-0 8249-0
DIN-Rail Mounting Kit -- -- -- -- -- -- -- -- 8250-0 8250-0
*Please refer to the iConverter 1-Module Redundant Power Chassis data sheet for additional model numbers and ordering options.
For wide (-40 to +60º C) and extended (-40 to +75º C) temperature range chassis, contact Omnitron for details.
Model Type 4Tx
Protocols 10BASE-T, 100BASE-TX
UTP Connectors RJ-45
Controls UTP X-over (Port 1), BP Enable,
Auto/Man, 10/100, FDX/HDX
LED Displays Power, 10/100 UTP Link
Dimensions W:0.85" x D:4.5" x H:2.8"
Weight 8 oz.
Compliance UL, CE, FCC Class A
Power Requirement 0.9 @ 3.3VDC (typical)
Temperature Standard: 0 to 50º C
Wide: -40 to 60ºC
Storage: -40 to 80º C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4000m
MTBF (hrs) 910, 000
Model Type Connectors Distance
8480-4 RJ-45 x 4 100m
For wide temperature (-40 to 60º C) modules, add a "W" to the end of
the model number. Consult factory for other configurations and
extended temperature (-40 to +75ºC) modules.