OMO BSH User manual

Electric Scooter
User Manual
Model: BSH

PARTS LIST
Max Support: 330LBS (150KG)
1Rearview Mirror
2Turning Signal Light
3Basket
4Steering Column Knob
5LED Light
6Headrest
7Rear Box
8Armrest
9Roatating Lever
10 Electromagnetic Brake Lever
11 Charging Port
12 Anti-slip Pedal
13 Power Switch
14 Seat Height Adjusting Knob
SCOPE OF APPLICATION
The electric scooter is suitable for individuals with limited mobility either indoors or outdoors. It
can help the elderly travel more easily and conveniently.
INSTALLATION
This electric scooter comes with the main part and the accessories.
Main Part

Accessories:
Rearview Mirrors, Adapter, Key, Headrest, User Manual, Basket, Rear Box, Clamping Knob Screws
1. Install the Headrest
Press down the lock buttons on top of the backrest to insert the headrest, release the buttons to
lock the headrest in a desired height. (as shown)
2. Install the Rearview Mirrors
Screw the rearview mirrors clockwise into the holes on the handles, and adjust them to a proper
position. (as shown)
3. Install Basket

Hang the basket onto the bar.(as shown)
4. Install the Rear Box
Use 4 screws to install the rear box back of the seat.(as shown)
5. Turn On the Power
Flip the switch to ON. You will hear a beeping sound to indicate the scooter power is connected.
(as shown)
OPERATION
1. Insert the key into the front keyhole, turn clockwise to turn on the scooter. Detailed
instructions are as shown in the picture below.

1Display Panel
2Hazard Light Switch
3LED Light Switch
4Speed Adjusting Dial
5Reverse Lever
6Forward Lever
7Horn
8Signal Light Switch
9USB Charging Port
2. Electromagnetic Brake
Auto Mode: Before drving, the brake lever must
adjust to auto mode. Then you can control the
forward/reverse lever to drive and relase the
lever to brake automatically. (as shown)
Manual Mode: When you need to move the
the scooter manually, turn off the power,
adjust the barke lever to manual mode.
(as shown)
3. Back/Forth Adjusting
Pull up the seat adjusting handle to move the seat back or forth as desired, release the handle to
lock its position. (as shown)
4. Backrest Adjusting
Pull up the backrest adjusting handle to adjust the backrest angle, release the handle to lock its
position. (as shown)
5. Armrest Adjusting
Each armrest can be pulled up, adjust the knob underneath to change its angle.(as shown)

（3. Back/Forth Adjusting） （4.Backrest Adjusting） （5.Armrest Adjusting）
6. Rotation Adjusting
Pull the seat rotating lever forward to turn the seat to a desirable position, release the lever to
lock. (as shown)
7. Height Adjusting
Loosen the small plastic knob under the seat, pull or press the seat to adjust the height as desired,
and retighten the knob. (as shown)
8. Steering Column Adjusting
Loosen the large plastic knob on the steering column, adjust the steering column to different
position as desired , and retighten the knob. (as shown)
（6. Rotation Adjusting） （7.Height Adjusting） （8.Steering Column Adjusting）
When you need to climb a hill, please adjust the steering column forward and the seat forward to
lower the center of gravity of the vehicle.
PREVENTION AND WARNING
1. Product should not be left outside in rainy conditions.
2. Please ensure all removable / adjustable parts are in good condition before use.
3. Do use the scooter on solid even surfaces to prevent tipping.
4. Necessary aid is needed for users with reduced mobility.
5. Do not leave the scooter charging for a long time. An average recharge takes about 8 hours.

6. We recommend recharging the scooter before each ride, and when it’s not used for an
extended period of time, please recharge it once every 2 month then turn off power switch.
7. Product should be stored in a cool and dry place away from prolonged sunlight.
8. Do not use the scooter on driveways or highways.
CLEANING / MAINTENANCE
Do not use strong or corrosive cleaners to clean the product’s surface.
Clean the scooter exterior with soft, damp cloth and leave it in a well ventilated area to dry
naturally.