Omron V600 Series User manual

1
V600Electromagnetic RFID System
Non-contact Data Communications
System
■Superior environmental resistance.
■High memory capacity of 8K bytes for Built-in-bat-
tery Data Carriers and 254 bytes for Battery-less
Data Carriers.
■Built-in-battery Data Carriers have a battery life
detecting function.
■Data of battery-less Data Carriers can be over-
written 300,000 times.
■Thin, compact, and low-cost Data Carriers are
available.
■Transmission distance of 100 mm max.
Ordering Information
■Data Carriers
Item Model Specifications/Design
Built-in-battery DCs V600-D8KR12 Compact
65
 40  15 mm 8k bytes
V600-D8KR13 Thin
86
 54  10.3 mm 8k bytes
V600-D8KR04 Intermediate-range
86
 54  20 mm 8k bytes
Replaceable-battery DCs V600-D2KR16 Compact
65
 40  5 mm 2k bytes
Battery-less DCs V600-D23P71 Card-type
86
 54  1.5 mm 254 bytes
V600-D23P72 Half-size card-type
50
 34  1.5 mm
V600-D23P66N Rectangular
34
 34  3.5 mm
V600-D23P66SP Rectangular package with PFA
95
 36.5  6.5 mm
V600-D23P61 Compact
32
 24  6 mm
V600-D23P53 Round super-compact
8 dia.
 5 mm
V600-D23P54 Round compact
12 dia.
 6 mm
V600-D23P55 Round super-compact
8 dia.
 6 mm

2
V600V600
■R/W Heads
Item Model Specifications/Design
Rectangular V600-H07 (0.5 m) Dimensions: 100
 100  30 mm 0.5-m cable
V600-H07 (2 m) 2-m cable
V600-H07 (5 m) 5-m cable
V600-H07 (10 m) 10-m cable
V600-H11 (0.5 m) Dimensions: 53
 40  23 mm 0.5-m cable
V600-H11-R (0.5 m) 0.5-m cable
V600-H11 (2 m) 2-m cable
V600-H11 (5 m) 5-m cable
V600-H11 (10 m) 10-m cable
Cylinder type V600-H51 (0.5 m) Dimensions: 22 dia.
 80 mm 0.5-m cable
V600-H51 (2 m) 2-m cable
V600-H51 (5 m) 5-m cable
V600-H51 (10 m) 10-m cable
V600-H52 (0.5 m) Dimensions: 22 dia.
 85 mm 0.5-m cable
V600-H52 (2 m) 2-m cable
V600-H52 (5 m) 5-m cable
V600-H52 (10 m) 10-m cable
Separate-amplifier
type Amplifier section V600-HA51 (2 m) 73.8
 22.6  36.5 mm, with 2-m cable
V600-HA51
(5 m) 73.8
 22.6  36.5 mm, with 5-m cable
V600-HA51
(10 m) 73.8
 22.6  36.5 mm, with 10-m cable
Sensor section V600-HS51 12 dia.
 36.5 mm deep, with 2-m cable
V600-HS61 30.5
 18  10 mm, with a 2-m cable

3
V600V600
■ID Controllers
■ID Sensor Units/ID Adapter
Item Model Specifications/Design
AC Power Supply V600-CA1A-V2 100 to 240 VAC, 50/60 Hz
Two R/W Head connectors
200
 100  100 mm
RS-232C host interface
V600-CA2A-V2 RS-422 host interface
V600–CA8A-V2 Parallel PNP host interface
V600-CA9A-V2 Parallel NPN host interface
DC Power Supply V600-CD1D-V3 24 VDC
R/W Head connectors
115
 68  80 mm
RS-232C host interface
V600-CM1D 24 VDC, 5 VDC
R/W Head connectors
Board type
Handheld V600-CB-US-S
(Kit) A Battery Charger, Ni-Cd Battery Pack, Battery Case, and CarryingBelt are included.
Dispose of recyclable Ni-Cd batteries appropriately.
V600-CB-US-S1
(Kit) Ni-cd Battery pack, Battery case, and Carrying Belt are included. Dispose of recyclable Ni-Cd batteries appropriately.
AC Power Supply IDSC-CIDR-A 100 to 240 VAC, 50/60 Hz
Relay contact output type
IDSC-CIDT-A 150 to 240 VAC, 50/60 Hz
Transistor output type
Model Specifications/Design
C500-IDS01-V2 SYSMAC CV500, CV1000, CVM1,
C500(F), C1000H(F), C2000H PLCs General-purpose
C500-IDS02-V1 Long-distance transmission
C200H-IDS01-V1 For the C200H and C200HX PLCs General-purpose
C500-IDA02 Required when using the C500-IDS02-V1
ID Sensor Unit Long-distance transmission
ID Sensor Unit
ID Adapter

4
V600V600
■Accessories (Order Separately)
■RS-232C Cables (Order Separately) ■Connectors for ID Controllers
(One Set per Unit)
Item Model Specifications/Design
R/W Antennas V600-A45 Standard cable
Non-water-resistant connectors 3-m cable V600-A44 5-m cable
V600-A40 10-m cable
V600-A41 20-m cable
V600-A42 30-m cable
V600-A56 Robotic cable 3-m cable
V600-A55 Non-water-resistant connectors 5-m cable
V600-A50 10-m cable
V600-A51 20-m cable
V600-A52 30-m cable
Data Carrier Mount-
ing Brackets V600-A81 For the V600-D2KR16
V600-A84 For the V600-D23P71/D23P72
Attachments V600-A86 For the V600-D23P66N
DataCarrierBattery
Replacement Kit
(lithium battery)
V600-A82 (5 in
each set) For the V600-D2KR16 Commercially available CR2016 battery
(includes replacement battery, seal, and cover)
Monitor Unit V600-P01 For the V600-CA
# A- # Controller
Model Cable
length Compatible ID Controllers
XW2Z-200P 2 m
XW2Z-500P 5 m
XW2Z-200S 2 m
XW2Z–500S 5 m
V600-CA1A-V2
V600-CD1D-V3
V600-CF1A
V600-CM1D
Model Name Compatible ID Controllers
XM2A-0901 Connector
Plug
XM2S-0911 Connector
Hood
XM2A-2501 Connector
Plug
XM2S-2511 Connector
Hood
MR-50F
(Honda
Tsushin Ko-
gyo)
Connector
Plug
MR-50L
(Honda
Tsushin Ko-
gyo)
Connector
Hood
V600-CA2A-V2
V600-CD1D-V3
V600-CM1D
V600-CA1A-V2
V600-CA8A-V2
V600-CA9A-V2

5
V600V600
Specifications
■Battery-less Data Carriers
■Built-in-battery Data Carriers
Item Card-type Half-size
Card-type Rectangular Compact Chemical- resistant Rectangular Compact Round Super- compact Round Compact Round Super- compact
Model
Memory Capaci-
ty 254 bytes
Memory type EEPROM (non-volatile memory)
Transmission
distance Refer to page 10, Transmission Distance Specifications for Battery-less DCs
Data retention
time 10 years (Data is retained for 10 years after it is written)
Number of over-
writes
- 10 to 40  C: 300,000 times
- 10 to 70  C: 100,000 times
- 20 to 0  C:
800,000 times
- 20 to 25  C:
400,000 times
- 20 to 60  C:
300,000 times
- 20 to 85  C:
100,000 times
- 10 to 40  C:
300,000 times
- 10 to 70  C:
100,000 times
- 25 to 40  C: 300,000 times
- 25 to 70  C: 100,000 times
- 25 to 0  C:
800,000 times
- 25 to 25  C:
400,000 times
- 25 to 60  C:
300,000 times
- 25 to 85  C:
100,000 times
Transmission
error detection 16-bit CRC in both directions
Ambient tem-
perature Operating:
- 20 to 110  C
(holding data)
- 10 to 70  C
(during R/W)
Storage:
- 20 to 110  C
Operating:
- 20 to 85  C
(holding data)
- 40 to 150  C
during R/W
Storage:
- 40 to 150  C
Operating:
- 40 to 110  C
(holding data)
- 20 to 70  C
during R/W
Storage:
- 40 to 110  C
Operating:
- 40 to 85  C (holding data)
- 25 to 70  C (during R/W)
Storage:
- 40 to 85  C
Operating:
- 25 to 85  C
(holding data)
- 40 to 150  C
(during R/W)
Storage:
- 40 to 150  C
Ambient humid-
ity Operating: 35% to 95%
Protection rat-
ing (IEC 60529) IP67 IP68 IP67G IP67 IP67
Vibration resis-
tance (destruc-
tion)
10 to 2,000 Hz, 3.0-mm double
amplitude, 300 m/s2accelera-
tion for 30 min each in 3 direc-
tions (90 min total)
10 to 2,000 Hz,
1.5-mm double
amplitude, 150
m/s2accelera-
tion 10 times
each in 3 direc-
tions (15 min)
10to2,000 Hz,3.0-mmdoubleamplitude,300 m/s2acceleration for30min
each in 3 directions (90 min total) 10 to 2,000 Hz,
1.5-mm double
amplitude, 150 m/
s2acceleration 10
times each in 3 di-
rections (15 min)
Shock resis-
tance (destruc-
tion)
1,000 m/s23 times each in 3 di-
rections (18 times total) 500 m/s23 times each in 3
directions (18
times total)
1,000 m/s23 times each in 3 directions (18 times total) 500 m/s23 times
each in 3 direc-
tions (18 times to-
tal)
Weight Approx. 15 g Approx. 5 g Approx. 6 g Approx. 19 g Approx. 5.8 g Approx. 0.4 g Approx. 1.0 g Approx. 0.6 g
Item Compact Thin Intermediate Range Compact with Replaceable Battery
Model
Memory Capacity 8K bytes/8K bytes 2K bytes
Memory type SRAM
Transmission distance Refer to page 16, Transmission Distance Specifications for Built-in-battery DCs
Battery life (see note 1) Refer to page 21, Battery Life 2 years (at 25
 C) (see note 2)
Number of reads/writes Unlimited Unlimited (Does not affect battery life)
Transmission error detection 16-bit CRC in both directions
Ambient temperature Operating:
- 40  to 70  C
- 25  to 70  C during R/W
Storage: - 40  to 70  C
Operating: - 15  to 70  C
0  to 50  C
during R/W
Storage: - 15  to 70  C
Ambient humidity Operating: 35% to 95%
Storage: 35% to 95% Operating: 35% to 85% Storage: 35% to 95%
Protection rating (IEC 60529) IP67 IP50 (dustproof) (see note 3)
Vibration resistance (destruction) 10 to 500 Hz, 1.0-mm double amplitude, 150 m/s2acceleration for 11 min each in X,
Y, and Z directions 10 to 150 Hz, 0.75-mm double ampli- tude, 100-m/s2acceleration for 30 min
each in X, Y, and Z directions
Shock resistance (destruction) 1,000 m/s23 times each in X, Y, and Z directions (18 times total) 300 m/s23 times each in X, Y, and Z di-
rections (18 times total)
Weight Approx. 70 g Approx. 160 g Approx. 15 g
V600-D23P71 V600-D23P72
V600-D23P66N
V600-D23P66SP V600-D23P61 V600-D23P53 V600-D23P54 V600-D23P55
V600-D8KR12 V600-D8KR13 V600-D8KR04 V600-D2KR16

6
V600V600
Note: 1. A low battery detection function is built-in.
2. The battery life is applicable for batteries used at a temperature of 25
 C. Refer to Temperature and Battery Life on page 22 for
details on the relationship between temperature and battery life. The CR2016 is provided as the replacement battery. Refer to
page 4 for details on accessories.
3. The Data Carrier is dustproof when the provided battery replacement cover seal is used.
■Read/Write (R/W) Heads
Note: 1. Extension cables are also available. The maximum cable length is 30.5 m for the V600-H07 and 50.5 m for the V600-H11/H51/H52.
2. The connectors are not water-resistant.
■R/W Heads (with Separate Amplifier)
Item
Transmission frequency 530 kHz
Ambient temperature Operating:
- 25  to 70  C
Storage:
- 40  to 85  COperating:
- 10  to 60  C
Storage:
- 25  to 75  C
Ambient humidity Operating: 35% to 95%
Storage: 35% to 95%
Insulation resistance 50 M
W (at 500 VDC) between cable terminals and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between cable terminals and case (Leakage current: 1 mA max.)
Protection rating
(IEC 60529) IP67
Vibration resistance
(destruction) 10 to 500 Hz, 1.0-mm double amplitude, 150 m/s2acceleration with 3 sweeps of 11 min each in X, Y, and Z
directions
Shock resistance Destruction: 500 m/s23 times each in X, Y, and Z directions (18 times total)
Cable length (see note 1) Standard lengths of 0.5 m, 2 m, 5 m, and 10 m.
Wireless transmission
error detection 16-bit CRC in both directions
Indicators Power: green; transmission: orange
Weight Approx. 1 kg (with 10-m cable) Approx. 650 g (with 10-m cable)
Item Sensor section Amplifier section
Transmission frequency 530 kHz ---
Ambient temperature Operating:
- 10  to 60  C
Storage:
- 25  to 75  C
Ambient humidity Operating: 35% to 95%
Insulation resistance 50 M
W (at 500 VDC) between cable terminals and case
Dielectric strength 1,000 VAC 50/60 Hz for 1 min between cable terminals and case (Leakage current: 1 mA max.)
Protection rating
(IEC 60529) IP67 IP66
Vibration resistance
(destruction) 10 to 2,000 Hz, 1.5-mm double amplitude, 300 m/s2ac-
celeration with 2 sweeps of 15 min each in 3 directions Installed in panel: 10 to 2,000 Hz, 1.5-mm single am- plitude, 300-m/s2acceleration with 2 sweeps of 11
min each in 3 directions
DIN Track installation: 10 to 500 Hz, 1.0-mm single
amplitude, 150-m/s2acceleration with 3 sweeps of
11 min each in 3 directions
Shock resistance
(destruction) 1,000 m/s23 times each in 3 directions (18 times total) 500 m/s23 times each in 3 directions (18 times total)
Cable length 2 m (fixed) between sensor and amplifier Standard lengths of 2 m, 5 m, and 10 m between am-
plifier and controller (see note 1)
Wireless transmission
error detection 16-bit CRC in both directions
Indicators --- Power: green; transmission: orange
Weight Approx. 70 g (with 2-m cable) Approx. 650 g (10-m cable)
V600-H07 V600-H11/H11-R V600-H51 V600-H52
V600-HS51 V600-HS61 V600-HA51

7
V600V600
Note: 1. Extension cables are also available. The maximum cable length is 50 m for the V600-HA51. Extension cables are not available
for the V600-HS51/HS61.
2. The connectors are not water-resistant.
■ID Controllers
Note The CA # A/-V2 and CD1D-V3 conform to EC Directives. Refer to page 31 for details.
Item V600 Series (Electromagnetic RFID System)
Host interface RS-232C RS-422
(Maximum of 16
Units can be
connected)
Parallel PNP
output Parallel NPN out- put RS-232C
Possible number of
R/W Heads 2 1
Power supply volt-
age 100 to 240 VAC, 50/60 Hz 24 VDC 24 VDC, 5 VDC
Acceptable power
supply voltage 85 to 264 VAC 20.4 to 26.4 VDC 24 VDC, 20.4 to 26.4 VDC, 5
VDC, 4.5 to 5.5
VDC
Power consumption 35 VA max. 7.2 W max. 24 VDC: 7.2 W
max.
5 VDC: 1.5 W
max.
Insulation resistance 50 M
W min. (at 500 VDC) between power terminals and case, between I/O terminals and case, or between the
power supply terminals and I/O terminals
Dielectric strength 1,500 VAC, 50/60 Hz for 1 min between the points listed above;
Leakage current: 10 mA max. 1,000 VAC, 50/60 Hz for 1 min be- tween the points listed above;
Leakage current: 10 mA max.
Noise immunity 1,500 V (p-p) pulses of 100 ns to 1 µs pulse width with a 1 ns rise time
Vibration resistance Destruction: 10 to 150 Hz, 0.3-mm double amplitude for 32 min each in X, Y, and Z directions
Malfunction: 10 to 150 Hz, 0.2-mm double amplitude for 32 min each in X, Y, and Z directions
Shock resistance Destruction: 200 m/s23 times each in X, Y, and Z directions (18 times total)
Ambient temperature Operating:
- 10  to 55  C
Storage:
- 25  to 65  COperating: 0
 to 50  C
Storage:
- 15  to 70  C
Ambient humidity 35% to 85% (with no condensation)
Operating conditions No corrosive gases
Memory back–up A capacitor backs up the most recent error data and statistical error data
for up to 20 days (at 25
 C) after a power interruption Memory backup is not available. Er- ror details, however, can be read
from the personal computer when
the power is turned ON.
Diagnostic functions Checks for CPU errors, memory errors, power interruptions, and transmission errors
Ground Ground to 100
W or less.
Protection rating For inter-panel installation (IEC 60529 IP30)
Weight Approx. 890 g Approx. 930 g Approx. 960 g Approx. 360 g Approx. 180 g
V600-CA1A-V2
(See note)
V600-CA2A-V2
(See note)
V600-CA8A-V2
(See note)
V600-CA9A-V2 V600-CD1D-V3
(See note)
V600-CM1D

8
V600V600
■Handheld ID Controllers
Note: 1. The continuous operating time is for new, fully charged nickel cadmium batteries or new alkaline batteries used at room temper-
ature.
2. Dispose of recyclable nickel cadmium batteries appropriately.
■Monitor Unit
V600-P01 (for use with V600-CA # A Controllers)
The Monitor Unit is a monitoring device that can be mounted to
an ID Controller. It can be used to test communications between
the R/W Head and Data Carrier when the RFID System is started
up, check the data in Data Carriers, and read error information or
statistical error information.
The specifications conform to those of the ID Controller, except
the operating temperature range is 0
 C to 40  C.
■V600-CB-US-S Configuration
Note The V600-CB-US-S1 is not provided with the V600-A14.
Item
Power supply Built-in nickel-cadmium batteries (6 VDC) or 9-V alkaline batteries (9 VDC) (see note)
Power consumption 700 mA max.
Continuous operating time (see
note) 3 hrs min. when using the built-in nickel-cadmium batteries; 1.5 hrs min. when using the alkaline batteries
Automatic power–saver The power is turned OFF automatically if a key input or response is not received in 10 min
Automatic command cancellation A command will be cancelled automatically if a response is not received from a Data Carrier
within 2 min
Low battery indicator This display appears when the battery voltage falls below the minimum voltage required for op-
eration
User memory 32K bytes (Data will be retained for at least 24 hrs after batteries are removed)
Vibration resistance Destruction: 10 to 150 Hz, 0.15-mm single amplitude for 32 min each in X, Y, and Z directions
Shock resistance Destruction: 200 m/s23 times each in X, Y, and Z directions (18 times total)
Ambient temperature Operating: 0
 to 45  C
Storage:
- 20  to 60  C (excluding the battery pack)
Ambient humidity Operating: 35% to 85%
Operating conditions No corrosive gases
Protection rating IEC 60529 IP30
Weight 680 g max. (including the battery pack)
V600-CB-US
Model Name Remarks
V600-CB-
US Handheld ID Controller Controller
V600-A14
(See note) Battery Charger (120 VAC) Accessory
V600-A11 Battery Case Accessory (for alkaline
batteries)
V600-A12 Ni-Cd Battery Pack Accessory (built-in to
ID Controller)
V600-A13 Carrying Belt Accessory

9
V600V600
■IDSC Series
Note Refer to the applicable ID Controller Operation Manual for details.
■ID Sensor Units
Note The C500-IDA02 must be used with the C500-IDS02-V1. The cable can be extended to a maximum of 200 m.
Item IDSC Series
IDSC-CIDR-A
IDSC-CIDT-A
Host interface RS-232C
Possible number of R/W Heads 1
Power supply voltage 100 to 240 VAC, 50/60 Hz
Acceptable power supply voltage 85 to 264 VAC
Power consumption 60 VA max.
Insulation resistance 20 M
W min. (at 500 VDC) between power terminals and case, between I/O terminals and case,
or between the power supply terminals and I/O terminals
Dielectric strength 2,300 VAC, 50/60 Hz for 1 min between the points listed above;
Leakage current: 10 mA max.
Noise immunity 1,500 V (p-p) pulses of 100 ns to 1 µs pulse width with a 1 ns rise time
Vibration resistance 10 to 57 Hz, 0.075-mm double amplitude, 57 to 150 Hz, 9.8 m/s2acceleration for 80 min each
in X, Y, and Z directions
Shock resistance 150 m/s23 times each in X, Y, and Z directions
Ambient temperature Operating: 0
 to 55  C
Storage:
- 20  to 75  C (excluding the battery pack)
Ambient humidity 10% to 90% (with no condensation)
Operating conditions No corrosive gases
Memory back–up The battery life is 5 years regardless of whether an RTC is provided.
The period that data is retained after a power interruption depends on the ambient temperature.
Replace the battery within one week of the battery low indicator flashing.
Diagnostic functions Checks for CPU errors, memory errors, power interruptions, and transmission errors
Ground Ground to 100
W or less.
Construction For inter-panel installation
Weight Approx. 1,500 g
Item C500-IDS01-V2 (for general use)
C500-IDS02-V1 (for long-distance
transmission)
(See note)
C200H-IDS01-V1
Communications control Dedicated time sharing
Possible number of R/W Heads 1 R/W Head
DC memory format 8–bit dedicated format
Commands The following 7 commands are used: Read, Write, Auto read, Auto write, Abort, Cancel auto–com-
mand, Data management processing
Transmission capacity Up to 502 bytes (251 words) of data can be
batch–transferred using the Intelligent I/O in-
structions (READ/WRITE)
Up to 1024 bytes (512 words) of data can be
transferred (at 20 words/PLC cycle)
Diagnostic functions 1. CPU watchdog timer
2. Detects transmission error with DC, absence of DC
3. Error log function, records transmission errors (with capacitor back-up)
Monitoring functions A Handheld Programming Console (with a special keysheet) can be used to monitor operation
(max. cable length: 4 m). The following operations are possible: Read 1-byte, Write 1-byte, Contin-
uous write, Test, and Monitor error log
Memory back-up The error information has a capacitor back-up. Data retained at least 15 days (at 25
 C).
I/O word allocation Two words are allocated when the Intelligent I/O
instructions (READ/WRITE) are used
Four words are allocated when the Intelligent I/O
instructions (READ/WRITE) are not used (se-
lectable)
Five words are allocated within the Special I/O
(IR) area (IR 100 to IR 199)
External power supply 250 mA min. at 24 VDC ---
Internal current consumption 400 mA max. at 5 VDC 250 mA max. at 5 VDC
120 mA max. at 26 VDC
(to drive the R/W Head) (see note)
Weight 700 g max. 400 g max.

10
V600V600
■Transmission Distance Specifications for Battery-less DCs
Recommended combinations Installation Controller
mode Transmission distance Condition for DC and R/W head Installation
Data Carrier R/W Head Stationary Read/
Write
distance
Irrelevant 10 to 70 mm (max. axial
offset ±10 mm)
Moving 30 to 60 mm (max. axial
offset ±10 mm)
Stationary Read/
Write
distance
Irrelevant 5 to 40 mm (max. axial
offset ±10 mm)
Moving 15 to 40 mm (max. axial
offset ±10 mm)
Stationary Read/
Write
distance
Irrelevant 10 to 50 mm (max. axial
offset ±10 mm)
Moving 30 to 40 mm (max. axial
offset ±10 mm)
Stationary Read/
Write
distance
Irrelevant 5 to 30 mm (max. axial
offset ±10 mm)
Moving 15 to 30 mm (max. axial
offset ±10 mm)
Stationary Read
distance Transmis- sion dis-
tance
priority
5 to 45 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
5 to 35 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 5 to 35 mm (max. axial offset ±10 mm)
Moving Read
distance Transmis- sion dis-
tance
priority
25 to 40 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
25 to 30 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 25 to 30 mm (max. axial offset ±10 mm)
Stationary Read
distance Transmis- sion dis-
tance
priority
5 to 30 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
5 to 25 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 5 to 25 mm (max. axial offset ±10 mm)
Moving Read
distance Transmis- sion dis-
tance
priority
15 to 25 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
15 to 20 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 15 to 20 mm (max. axial offset ±10 mm)
V600-D23P71 V600-H07
V600-H07/11/51
R/W Head
V600-D23P71/D23P72
Data Carrier
Iron
Non-metallic
(Plastic, wood, etc.)
These Data Carriers are for
installation on non-metallic sur
faces only.
Note: Data transmission will be
impossible if the DC is
installed directly on a
metal surface. The
transmission distances
will be reduced to 70% of
the listed figures if the
DC is 10 mm from the
metal surface, and 90%
of the listed figures if the
DC is 20 mm from the
metal surface.
Refer to the section on
installation in the Data
Carrier or R/W Head's
Operation Manual or
Supplement for more
details.
V600-H11/H11-R
V600-D23P72
V600-H07
V600-H11/H11-R
V600-D23P66N
V600-H07
V600-H07/11/51
R/W Head
V600-D23P71/D23P72
Data Carrier
Iron
Non-metallic
(Plastic, wood, etc.)
Note: Data transmission will be
impossible if the DC is
installed directly on a
metal surface. The
transmission distances
will be reduced to 70% of
the listed figures if the
DC is 10 mm from the
metal surface, and 90%
of the listed figures if the
DC is 20 mm from the
metal surface.
Refer to the section on
installation in the Data
Carrier or R/W Head's
Operation Manual or
Supplement for more
details.
V600-H11/H11-R

11
V600V600
Stationary Read
distance Transmis- sion dis-
tance
priority
5 to 40 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
5 to 30 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 5 to 30 mm (max. axial offset ±10 mm)
Moving Read
distance Transmis- sion dis-
tance
priority
20 to 40 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
20 to 30 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 20 to 30 mm (max. axial offset ±10 mm)
Stationary Read
distance Transmis- sion dis-
tance
priority
5 to 25 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
5 to 20 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 5 to 20 mm (max. axial offset ±10 mm)
Moving Read
distance Transmis- sion dis-
tance
priority
10 to 25 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
10 to 20 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 10 to 20 mm (max. axial offset ±10 mm)
Recommended combinations Installation Controller
mode Transmission distance Condition for DC and R/W head Installation
Data Carrier R/W Head
V600-D23P66SP V600-H07
V600-H07/11/51
R/W Head
V600-D23P71/D23P72
Data Carrier
Iron
Non-metallic
(Plastic, wood, etc.)
Note: Data transmission will be
impossible if the DC is
installed directly on a
metal surface. The
transmission distances
will be reduced to 70% of
the listed figures if the
DC is 10 mm from the
metal surface, and 90%
of the listed figures if the
DC is 20 mm from the
metal surface.
Refer to the section on
installation in the Data
Carrier or R/W Head's
Operation Manual or
Supplement for more
details.
V600-H11/H11-R

12
V600V600
Stationary Read
distance Transmis- sion dis-
tance
priority
2 to 19 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
2 to 16 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 2 to 16 mm (max. axial offset ±10 mm)
Moving Read
distance Transmis- sion dis-
tance
priority
12 to 19 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
12 to 16 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 12 to 16 mm (max. axial offset ±10 mm)
Stationary Read
distance Transmis- sion dis-
tance
priority
1 to 16 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
1 to 14 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 1 to 14 mm (max. axial offset ±10 mm)
Moving Read
distance Transmis- sion dis-
tance
priority
7 to 16 mm (max. axial
offset ±10 mm)
Transmis-
sion time
priority
7 to 14 mm (max. axial
offset ±10 mm)
Write
distance Irrelevant 7 to 14 mm (max. axial offset ±10 mm)
Recommended combinations Installation Controller
mode Transmission distance Condition for DC and R/W head Installation
Data Carrier R/W Head
V600-D23P61
V600-H11/H11-R
These Data Carriers can be
installed on all surfaces.
Note: The listed transmission
distances apply for
installation on metallic
and non-metallic sur
faces.
V600-H51
R/W Head
V600-D23P61
Data Carrier
Iron Iron (SC, SS)
V600-H11
R/W Head
V600-D23P61
Data Carrier
Iron
Iron (SC, SS)
V600-H51

13
V600V600
Stationary Read
distance Transmis- sion dis-
tance
priority
0.5 to 4.0
mm (max.
axial off-
set ±2
mm)
0.5 to 4.5
mm (max.
axial off-
set ±1
mm)
Transmis-
sion time
priority
0.5 to 3.0
mm (max.
axial off-
set ±2
mm)
0.5 to 3.5
mm (max.
axial off-
set ±1
mm)
Write
distance Irrelevant 0.5 to 3.0 mm (max.
axial off-
set ±2
mm)
0.5 to 3.5
mm (max.
axial off-
set ±1
mm)
Stationary Read
distance Transmis- sion dis-
tance
priority
0.5 to 4.0
mm (max.
axial off-
set ±2
mm)
0.5 to 4.5
mm (max.
axial off-
set ±1
mm)
Transmis-
sion time
priority
0.5 to 3.0
mm (max.
axial off-
set ±2
mm)
0.5 to 3.5
mm (max.
axial off-
set ±1
mm)
Write
distance Irrelevant 0.5 to 3.0 mm (max.
axial off-
set ±2
mm)
0.5 to 3.5
mm (max.
axial off-
set ±1
mm)
Stationary Read
distance Transmis- sion dis-
tance
priority
0.5 to 4.0
mm (max.
axial off-
set ±2
mm)
0.5 to 4.5
mm (max.
axial off-
set ±1
mm)
Transmis-
sion time
priority
0.5 to 3.0
mm (max.
axial off-
set ±2
mm)
0.5 to 3.5
mm (max.
axial off-
set ±1
mm)
Write
distance Irrelevant 0.5 to 3.0 mm (max.
axial off-
set ±2
mm)
0.5 to 3.5
mm (max.
axial off-
set ±1
mm)
Recommended combinations Installation Controller
mode Transmission distance Condition for DC and R/W head Installation
Data Carrier R/W Head
V600-D23P53 V600-HS51 These Data Carriers are for
installed in metallic only.
Note: The listed transmission
distances apply for
installation on metallic
and non-metallic sur
faces.
V600-HS61
R/W Head
V600-D23P53/D23P54
Data Carrier
Iron
Iron (SC, SS)
V600-HS51
R/W Head
V600-D23P53/D23P54
Data Carrier
Iron Iron (SC, SS)
V600-HS52
R/W Head
V600-D23P53/D23P54
Data Carrier
Iron Iron (SC, SS)
V600-HS61
V600-H52

14
V600V600
Stationary Read
distance Transmis- sion dis-
tance
priority
0.5 to 6.0
mm (max.
axial off-
set ±2
mm)
0.5 to 6.5
mm (max.
axial off-
set ±1
mm)
Transmis-
sion time
priority
0.5 to 5.5
mm (max.
axial off-
set ±2
mm)
0.5 to 6.0
mm (max.
axial off-
set ±1
mm)
Write
distance Irrelevant 0.5 to 5.0 mm (max.
axial off-
set ±2
mm)
0.5 to 5.5
mm (max.
axial off-
set ±1
mm)
Stationary Read
distance Transmis- sion dis-
tance
priority
0.5 to 6.5
mm (max.
axial off-
set ±2
mm)
0.5 to 7.0
mm (max.
axial off-
set ±1
mm)
Transmis-
sion time
priority
0.5 to 5.5
mm (max.
axial off-
set ±2
mm)
0.5 to 6.0
mm (max.
axial off-
set ±1
mm)
Write
distance Irrelevant 0.5 to 5.5 mm (max.
axial off-
set ±2
mm)
0.5 to 6.0
mm (max.
axial off-
set ±1
mm)
Stationary Read
distance Transmis- sion dis-
tance
priority
0.5 to 6.5
mm (max.
axial off-
set ±2
mm)
0.5 to 7.0
mm (max.
axial off-
set ±1
mm)
Transmis-
sion time
priority
0.5 to 5.5
mm (max.
axial off-
set ±2
mm)
0.5 to 6.0
mm (max.
axial off-
set ±1
mm)
Write
distance Irrelevant 0.5 to 5.5 mm (max.
axial off-
set ±2
mm)
0.5 to 6.0
mm (max.
axial off-
set ±1
mm)
Recommended combinations Installation Controller
mode Transmission distance Condition for DC and R/W head Installation
Data Carrier R/W Head
V600-D23P54 V600-HS51 These Data Carriers are for
installed in metallic only.
Note: The listed transmission
distances apply for
installation on metallic
and non-metallic sur
faces.
V600-HS61
R/W Head
V600-D23P53/D23P54
Data Carrier
Iron
Iron (SC, SS)
V600-HS51
R/W Head
V600-D23P53/D23P54
Data Carrier
Iron Iron (SC, SS)
V600-HS52
R/W Head
V600-D23P53/D23P54
Data Carrier
Iron Iron (SC, SS)
V600-HS61
V600-H52

15
V600V600
Note: 1. The transmission distance/transmission time priority mode setting can be made only with the lower-level communications mode
setting switch with a serial-interface Controller or ID Sensor Unit. With parallel-interface Controllers, the mode setting is always
transmission distance priority.
2. With Data Carriers that can be installed on metal surfaces (V600-D23P61/D23P53/D23P54), the transmission distance will vary
depending on the metal used. The figures given in the table above are valid for iron (SC, SS). Refer to the section on installation
in the Data Carrier or R/W Head Operation Manual or Supplement for more details.
3. The specifications take fluctuations in temperature and slight differences between products into account.
Stationary Read
distance Transmis- sion dis-
tance
priority
0.5 to 9.5 mm
Transmis-
sion time
priority
0.5 to 8.0 mm
Write
distance Transmis- sion dis-
tance
priority
0.5 to 9.0 mm
Transmis-
sion time
priority
0.5 to 8.0
Stationary Read
distance Transmis- sion dis-
tance
priority
0.5 to 7.0
Transmis-
sion time
priority
0.5 to 6.0
Write
distance Transmis- sion dis-
tance
priority
0.5 to 7.0
Transmis-
sion time
priority
0.5 to 6.0
Stationary Read
distance Transmis- sion dis-
tance
priority
0.5 to 9.0
Transmis-
sion time
priority
0.5 to 8.5
Write
distance Transmis- sion dis-
tance
priority
0.5 to 8.5
Transmis-
sion time
priority
0.5 to 8.5
Recommended combinations Installation Controller
mode Transmission distance Condition for DC and R/W head Installation
Data Carrier R/W Head
V600-D23P55 V600-HS51
V600-HS51
Iron
V600-HS52
R/W Head
V600-D23P55
Data Carrier
(plastic, wood, etc.)
Nonmetal
V600-D23P55
Data Carrier
R/W Head
V600-HS51
Sensor
Iron
These Data Carriers are for
installed in metallic only.
Note: The listed transmission
distances apply for
installation on metallic
and non-metallic sur
faces.
V600-D23P55
Data Carrier
Iron
(plastic, wood, etc.)
Nonmetal
(plastic, wood, etc.)
Nonmetal
V600-HS61
V600-H52

16
V600V600
■Transmission Distance Specifications for Built-in-battery DCs
Recommended combinations Installation Controller
mode Transmission distance Condition for DC and R/W head Installation
Data Carrier R/W Head Stationary Flush-
mountedin
metal
Irrelevant 10 to 50 mm (max.
axial offset ±10 mm)
Surface-
mounted
on metal
10 to 60 mm (max.
axial offset ±10 mm)
Moving Flush-
mountedin
metal
25 to 50 mm (max.
axial offset ±10 mm)
Surface-
mounted
on metal
25 to 60 mm (max.
axial offset ±10 mm)
Stationary Flush-
mountedin
metal
Irrelevant 5 to 40 mm (max. ax-
ial offset ±10 mm)
Surface-
mounted
on metal
5 to 45 mm (max. ax-
ial offset ±10 mm)
Moving Flush-
mountedin
metal
25 to 40 mm (max.
axial offset ±10 mm)
Surface-
mounted
on metal
25 to 45 mm (max.
axial offset ±10 mm)
Stationary Flush-
mountedin
metal
Irrelevant 10 to 30 mm (max.
axial offset ±10 mm)
Surface-
mounted
on metal
10 to 35 mm (max.
axial offset ±10 mm)
Moving Flush-
mountedin
metal
20 to 30 mm (max.
axial offset ±10 mm)
Surface-
mounted
on metal
20 to 35 mm (max.
axial offset ±10 mm)
Stationary Flush-
mountedin
metal
Irrelevant 10 to 30 mm (max.
axial offset ±10 mm)
Surface-
mounted
on metal
10 to 30 mm (max.
axial offset ±10 mm)
Moving Flush-
mountedin
metal
15 to 30 mm (max.
axial offset ±10 mm)
Surface-
mounted
on metal
15 to 30 mm (max.
axial offset ±10 mm)
V600-D8KR12
V600-H07
Flush-mounted in metal
All metal
Surface-mounted on metal
All metal
Data
Carrier
Data
Carrier
All metal
R/W head
Note: The listed transmission
distances apply for
installation on metallic
and non-metallic sur
faces.
V600-H11
V600-D8KR13
V600-H07
V600-H11

17
V600V600
Note When Data Carriers are flush-mounted in metal, the read/write distance will depend on the distance (x) between the side of the DC
and the metal surface.
Refer to the appropriate R/W Head Operation Manual for details
on the influence of metal.
Stationary Flush-
mountedin
metal
Irrelevant See note
Surface-
mounted
on metal
10 to 100 mm (max.
axial offset ±10 mm)
Moving Flush-
mountedin
metal
See note
Surface-
mounted
on metal
50 to 100 mm (max.
axial offset ±10 mm)
Stationary Flush-
mountedin
metal
Irrelevant See note
Surface-
mounted
on metal
10 to 65 mm (max.
axial offset ±10 mm)
Moving Flush-
mountedin
metal
See note
Surface-
mounted
on metal
30 to 65 mm (max.
axial offset ±10 mm)
Stationary Flush-
mountedin
metal
Irrelevant 2 to 15 mm (max. ax-
ial offset ±10 mm)
Surface-
mounted
on metal
Moving Flush-
mountedin
metal
6 to 15 mm (max. ax-
ial offset ±10 mm)
Surface-
mounted
on metal
10 to 15 mm (max.
axial offset ±10 mm)
Recommended combinations Installation Controller
mode Transmission distance Condition for DC and R/W head Installation
Data Carrier R/W Head
V600-D8KR04
(unsealed)
V600-H07
Flush-mounted
in metal
x mm x mm
20 mm max.
All metal
Note: The listed transmission
distances apply for
installation on metallic
and non-metallic sur
faces.
V600-H11
V600-D2KR16
V600-H11
Data
Carrier
All metal
Note: The listed transmission
distances apply for
installation on metallic
and non-metallic sur
faces.
Flush-mounted
in metal
x mm x mm
20 mm max.
All metal
Combined with V600-H07 Combined with V600-H11
(Axis deviation: ±0 mm)
(Axis deviation: ±0 mm)
R/W Head Data Carrier
Above 100 Above 100
Distance from metal surface (x) (mm)Distance from metal surface (x) (mm)
Transmission distance (mm)
Transmission distance (mm)
R/W Head Data Carrier

18
V600V600
Transmission Range Graphs
Battery-less Compact DCs
The values shown in the following graphs are in millimeters. Refer to pages 10 to 17 for details on Data Carrier and R/W Head mounting
conditions.
Read range (in transmission
distance priority mode)
Write range (in transmission
distance or transmission time
priority mode)
Read range (in transmission
time priority mode)
V600-D23P71 & V600-H07 V600-D23P71 & V600-H11
V600-D23P66SP & V600-H07 V600-D23P66SP & V600-H11
V600-D23P61 & V600-H11 V600-D23P61 & V600-H51
V600-D23P66N & V600-H07 V600-D23P66N & V600-H11
V600-D23P72 & V600-H07 V600-D23P72 & V600-H11

19
V600V600
Read range (in transmission
distance priority mode)
Write range (in transmission
distance or transmission time
priority mode)
Read range (in transmission
time priority mode)
0ー5ー10ー15 5
15
10
5
10 15 X
YY
X
V600-D23P55 & V600-HS51 V600-D23P55 & V600-HS61 V600-D23P55 & V600-H52
0ー5ー10ー15 5
15
10
5
10 15 X
YY
X
0
ー5 ー10 ー15 5
15
10
5
10 15 X
YY
X
V600-D23P53 & V600-HS51 V600-D23P53 & V600-HS61 V600-D23P53 & V600-H52
V600-D23P54 & V600-HS51 V600-D23P54 & V600-HS61 V600-D23P54 & V600-H52

20
V600V600
Built-in-battery DCs
Battery-replaceable DCs
Transmission Time Specificatios
The transmission time does not depend on the model of R/W Head or Data Carrier, although transmission times differ between Data Car-
riers with and without batteries.
The turn around time (TAT) is the total time required from the issuance of a command from the host device (for example, a host computer)
until the reception of a response.
The lower-level communications time does not include the host communications; it is the time required for communications between the R/
W Head and Data Carrier. The lower-level communications time is used in the equation for the DC speed.
DC Speed = (Distance travelled in the transmission range)/(Lower-level communications time)
V600-D8KR12 & V600-H07 V600-D8KR12 & V600-H11
V600-D8KR04 & V600-H11
V600-D8KR13 & V600-H11
V600-D8KR04 & V600-H07 V600-D8KR04 & V600-H11
V600-D8KR13 & V600-H07
V600-D2KR16 & V600-H11
Note: Changing the direction of the DC will change the transmission range.
Command
RDH1
Lower-level
communications time
TAT (Turn Around Time)
Response
RD001122
s
s