OMT-Veyhl OV1008 User manual

USER GUIDE
OV1008 | Part No. 84867
OV1008
FIXED AND FLIP TABLES

2 | OV1008
User Guide: OV1008
FEATURES
• Multiple base options
• Meets BIFMA X5.5 standards
• Ten-year warranty
• Easy assembly
• Over 150 colors with two-tone combinations available
The Irons Table solution combines easy assembly and hundreds
of color combinations with a well-designed and contemporary
product. This line is both useful and attractive with coordinating
xed-height T-Leg, C-Leg, X-Base and Flip Top options. Irons features
knock-down construction and single box packaging for easy
shipping and storage.
Appreciate the style, quality construction and durability this
product line offers. Engineered and tested for dependability.
PRODUCT OVERVIEW
OV1008
FIXED AND FLIP TABLES

OV1008 | 3
User Guide: OV1008
Parts Diagram 4-5
24"/30" T-Leg 4
24"/30" C-Leg 4
30" X-Base 5
30" Flip Top Base 5
Safety Information 6
Assembly Instructions 7-13
T-Leg, C-Leg, X-Base 8-9
Flip Top 10-13
Customer Service 14
Standards & Certications 15
TABLE OF CONTENTS
TABLE OF CONTENTS

4 | OV1008
User Guide: OV1008
PARTS Qty/Package
1. Column 2
2. Foot Assembly 2
3. M6 x 40mm Button Head Cap Screw 8
PARTS Qty/Package
1. Column 2
2. Foot Assembly 2
3. M6 x 40mm Button Head Cap Screw 8
24"/30"T-LEG
24"/30"C-LEG
PARTS DIAGRAM
2
1
3
3
2
1
OV1008
PARTS DIAGRAM

OV1008 | 5
User Guide: OV1008
PARTS Qty/Package
1. Caster 4
2. Caster Stem 4
3. Foot Assembly 2
4. M6 x 40mm Button Head Cap Screw 8
5. Column 2
6. M6 x 12mm Button Head Cap Screw 8
7. Mounting Plate 4
8. Support Rail 1
9. Top Support Assembly 2
10. Cord Clip 4
11. Paddle Assembly 1
12. Plastic Spacer 1
13. #10x1.00 " Phillips Head Wood Screw 1
PARTS Qty/Package
1. Column 1
2. Bottom Foot Assembly 1
3. Top Foot Assembly 1
4. Mending Plate 1
5. #8 x ½" Self-Drilling Screw 4
6.
M6 x 40mm Button Head Cap Screw 4
FLIP TOP
30"X-BASE
PARTS DIAGRAM
2
1
3
4
5
6
1
2
3
4
5
6
7
8
9
13
10
12
11

6 | OV1008
User Guide: OV1008
SAFETY INFORMATION
SAFETY
INFORMATION
IMPORTANT SAFETY INSTRUCTIONS Save these instructions.
INSTALL ONLY APPROVED WORK SURFACES
This table system does not include a work surface (desktop). Maximum load for table is 200 lb, including
work surface. Desktop dimensions for X-Base are not to exceed 24" (square) or 30" (round). Maximum
desktop depth for C- and T-Leg not to exceed 30". If you are unsure if your preferred work surface meets
specications, contact customer service.
DO NOT OVERLOAD DESK
To prevent table from tipping or collapsing, make sure the desk frame is not overloaded by the weight
of tabletop and objects on table. Evenly distribute load; excess loads near edges can reduce stability
and cause table to tip over.
• Do not exceed maximum load (including weight of desktop) of 200 lb (91Kg)
• Do not exceed edge load of 25 lb when positioning monitors or mounting accessories
• Do not sit or stand on table
USE CARE WHEN MOVING TABLE
• Remove all objects and mounted accessories from the table before moving
• Clear objects and equipment from table before rolling to reduce the risk of tipping over
WARNING: To reduce the risk of death, serious injury, or property damage, read and
follow this safety information and the provided instructions when assembling this product.
Do not change or replace components and accessories provided by OMT-Veyhl.

OV1008 | 7
User Guide: OV1008 ASSEMBLY INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
ASSEMBLY OVERVIEW FIXED BASES (page 8-9)
1. Assemble the foot to the column
2. Attach the column to the table top
FLIP TOP BASE (page 10-13)
1. Assemble the foot to the column
2. Attach column assemblies to the support rail
3. Install plastic spacer
4. Mount the assembled ip base to table top
5. Mount the paddle to the table top
6. Install wire clips and adjust the cable tension
Assembly of the table frame to be made in accordance with this manual.
Changes to the table frame or improper use may affect the safety, function, and life of your product.
This manual applies to the following table bases: 24"/30"T-Leg, 24"/30"C-Leg, 30"X-Base, Flip Top

8 | OV1008
User Guide: OV1008
ASSEMBLY INSTRUCTIONS
ATTACH COLUMN TO THE TABLE TOP
Use the chart below to locate the position of the pilot holes on the table top.
X-Base on a square work surface must be mounted with feet in line with the corners of the
work surface, as shown. Failure to follow this step will result in poor stability.
2
X
Center Line of Table Top
Y
X
Y
OINCORRECT
PCORRECT
FIXED BASE ASSEMBLY
ASSEMBLE THE FOOT TO THE COLUMN
Install four (4) M6 button head screws through the bottom of the foot and into the threaded holes
in the bottom of the column.
X-Base: Be sure to attach mending plate on bottom with accompanying screws.
NOTE: Do not drive the screws into the column with a drill or impact driver without rst starting the
screws by hand.
1
LEG CONFIGURATION FRONT CORNER HOLE DEPTH LOCATION (X)
24 in T-Leg 1.5 in
FRONT CORNER HOLE WIDTH LOCATION (Y)
2.5 in
30 in T-Leg 1.5 in 2.5 in
24 in C-Leg 1.5 in 6.25 in
30 in C-Leg 1.5 in 7.25 in

OV1008 | 9
User Guide: OV1008 ASSEMBLY INSTRUCTIONS
Mark the locations of the pilot holes. Drill the pilot holes to the size recommended by the table top
manufacturer. Install the screws through the mounting plate into the table top.
NOTE: The holes in the mounting plate are .280" in diameter.
5in
2.5in
2.5in
5in
If you have any difculty assembling this unit, or need to order replacement parts, please contact
our Customer Service department. Use the parts diagram on page 4-5 as a reference.

10 | OV1008
User Guide: OV1008
ASSEMBLY INSTRUCTIONS
FLIP-TOP BASE ASSEMBLY
ASSEMBLE THE FOOT TO THE COLUMN
Install four (4) M6 button head screws through the
bottom of the foot and into the threaded holes in
the bottom of the column.
NOTE: Do not drive the screws into the column
with a drill or impact driver without rst starting
the screws by hand.
1
ATTACH COLUMN ASSEMBLIES
TO THE SUPPORT RAIL
Refer to Illustrations A, B and C.
2
ILLUSTRATION A:
Slide mounting plates into the support rail.

OV1008 | 11
User Guide: OV1008
2"
CUSTOMER SERVICE
ILLUSTRATION B:
Install each column assembly to the support rail using M6x12 button head screws.
Be sure to mount column assembly 2" from the end of the support rail.
ILLUSTRATION C:
Slide the sides of the top support assembly
onto the support rail.

12 | OV1008
User Guide: OV1008
ASSEMBLY INSTRUCTIONS
MOUNT THE ASSEMBLED FLIP BASE
TO THE TABLE TOP
Center the ip base on the table top,
screw (4) #10x1" screws into each top support.
4
INSTALL PLASTIC SPACER
Center the plastic spacer in center of work
surface. Use the #10x1" screw to attach.
Spacer is required to prevent table top
from bowing.
3

OV1008 | 13
User Guide: OV1008 CUSTOMER SERVICE
MOUNT THE PADDLE TO THE TABLE TOP
Center the paddle on the length of the table,
with the edge of the paddle inset 1" from the
front edge of the table top.
Do not overtighten. Doing so may crack
the component.
5
INSTALL WIRE CLIPS AND ADJUST
THE CABLE TENSION
Carefully turn the table upright and depress
the release paddle.
Adjust the tension by turning the collar of the
cable at the paddle counter-clockwise until the
cable is loose, but still connected. Turn clockwise
until a slight resistance is felt. Repeat for the
opposite side.
Lower table top to at position and press the
release paddle to test. If table does not release,
turn collar another quarter turn clockwise.
Repeat until table releases.
6

14 | OV1008
User Guide: OV1008
ASSEMBLY INSTRUCTIONS
CUSTOMER SERVICE
If you have any problems with
your table base, please contact
our service department.
PHONE: [phone]
FAX: [phone]

OV1008 | 15
User Guide: OV1008 CUSTOMER SERVICE
CUSTOMER SERVICE
CONTACT YOUR SALES REPRESENTATIVE
FOR WARRANTY INFORMATION
WARRANT Y
STANDARDS &
CERTIFICATIONS
Meets 2014 BIFMA standards

OV1008
USER GUIDE
Part No. 84867
Rev 120517