OMT-Veyhl UNIVERSAL WORK SURFACES User manual

USER GUIDE
UNIVERSAL
WORK SURFACES

2
User Guide
PRODUCT OVERVIEW
This page was intentionally left blank.

3
User Guide
Safety Information 4
Installation Instructions 5-8
TABLE OF CONTENTS
WARRANTY
TABLE OF CONTENTS
CONTACT YOUR SALES REPRESENTATIVE FOR WARRANTY INFORMATION

4
User Guide
SAFETY INFORMATION
SAFETY
INFORMATION
KEEP AWAY FROM CHILDREN
This table system is not designed for use in homes or other areas accessible by small children.
For indoor commercial ofce use only.
DO NOT OVERLOAD DESK
To prevent table from tipping or collapsing, make sure the desk frame is not overloaded by the weight
of tabletop and objects on table. Evenly distribute load; excess loads near edges can reduce stability
and lead to tip over.
• Do not exceed maximum load of table base (including weight of desktop)
• Do not exceed edge load of 25 lb. when positioning monitors or mounting accessories
• Do not sit or stand on table
USE CARE WHEN MOVING DESK
• Clear objects and equipment from table before moving to reduce the risk of tipping over
• Do not move a loaded desk
• Do not pull or push the table along the oor. Pick table up when moving it.
ATTENTION CA RESIDENTS
WARNING
This product can expose you to chemicals that are known to the State of California to cause cancer,
birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
MATERIAL FLAME SPREAD RATING: 155
IMPORTANT SAFETY INSTRUCTIONS Save these instructions.
WARNING: To reduce the risk of death, serious injury, or property damage, read and
follow this safety information and the provided instructions when assembling this product.
Do not change or replace components and accessories provided by the manufacturer.

5
User Guide INSTALLATION INSTRUCTIONS
INSTALLATION
INSTRUCTIONS
The installation of the work surface to be made in accordance with this manual.
Changes to the work surface or improper use may affect the safety, function, and life of your product.
These instructions are intended to assist the installer with the most common product congurations.
If your base requires the use of different hole locations, please disregard these locator holes and
follow instructions provided with your product.
PRE-DRILLED LOCATOR HOLES
optional grommet