OMUARK SOLO Series User manual

USER MANUAL
SOLO series
V2.0

01/16
What’s Included
1 x Solo LockBox
HELLO
Screw Driver x 1
1 x Reset Tool
1 x HELLO Card
3 x Screw Cap
6
8
7
9
0
5
4
3
2
1
3 x Mounting Screws
3 x Screws Anchors
What are the differences
>1. OTA upgrade: Support remote software upgrade
>2. App: Simplified user interface / features

01/16
02/16
Specification
Model
Unlock Mechanism
Battery
Material
Solo
Body Zinc Alloy, SUS304
4 x AAA Alkaline Battery
Bluetooth, PIN Code, App
Front Inside Back
Jump Start USB-C
) ’ ’49.3
(
mm001
43mm ( 1.69’‘ ）43mm ( 1.69‘’ ）27mm ( 1.06 ‘’ )
) ’ ’49.3
(
mm001
Depth
6
8
7
9
0
5
4
3
2
1

Lock&Unlock
Emergency
Battery
Mobile Control
03/16
Administrator Unlock
.......
Anti-peeping Auto Locking
User Unlock
Add up to 10 digits before and after PIN code to
intensify your PINs.
This LockBox allows to add up to 100 user PIN
codes for your family, friends and visitors.
If there are no opening motions in 10 seconds
the box will be automatically locked.
Bluetooth one-touch unlock Offline Unlock
Mobile Administrator
With your Mobile you could unlock the LockBox by
tapping the ” ” on the App. You could generate offline code through
mobile App, for scheduled access, parcel
delivery, housekeeping, etc.
Set Administrator PIN Codes from your Mobile to
unlock, add users, delete users, etc.
Battery Life
4 AAA batteries, the life cycle will be more
than 12 months, please use good batteries.
Low Battery
When the battery runs out of power, system
will remind you to replace the batteries.
When the power is down and use USB-C to
jump start the lock and get it unlocked
Jump Start
Set a Master Administrator PIN for Unlocking,
settings, operations etc. and only the administrator
could change the administrator PIN code.
System Lockdown
The lock will be lockdown for 5 minutes
if continuously enter wrong PINs for 5 times.
AA A
AA A
AA A
AA A
Low Consumption
BLE broadcasting turns to sleep mode if no
operations.
.......
OTA Upgrade
Upgrade online, Fix bugs,
Update functions and optimize user experience.
Features

03/16
04/16
+
+
A A AA A A
+
+
A A AA A A
Quick Start
Step 1>Install Battery
>1. Remove the battery cover
>2. Put 4 AAA batteries into the battery dock.

05/16
Step 3>Add Device
>1. Scan QR Code below and download the App and turn on your mobile Bluetooth
>1. Go to App Home page, click Add Device or click “+” on the upper right.
Step 2>Download Mobile App

05/16
06/16
6
8
7
9
0
5
4
3
2
1
> 2. Press +9+ and enter Admin password + , when the light slowly blinks in blue
the KeyBox is ready to pair.
Activate Bluetooth to enter pairing mode

07/16
>3. You will see the detected device and click “Go to add”.

07/16
>4. Connecting, you need to wait for few seconds to let it finish.
>5. Device added
08/16

Step 4>Change Admin Password-Initial Admin Password:123456
>1. Press and hold for 3 beeps
08/16
09/16
6
8
7
9
0
5
4
3
2
1
6
8
7
9
0
5
4
3
2
1
>2. Right after the 3 beeps please key in:
Initial Admin code 123456 + +new admin code+ +new admin code again + , when
you hear a long beep with green light, the new admin password has been set.

Mechanical Instructions
Password & Factory Mode:
Bluetooth broadcasting & re-connecting:
Touch any key to activate the Bluetooth, LockBox will get reconnected again with App.
09/16
10/16
Password must be 6 digits (no more no less)
1. Password Length
Bluetooth will turn to sleep mode and lights out if no operations within 1 minute.
2. Add User Password
Tap + 0 + until the blue light blinks
>. Enter admin password +
>. Enter new user password +
>. Enter new user password again and press
>. When the (Enter button) blinks in green, user password has been set.
7. Reset Factory Mode
Use the reset tool press and hold the reset button for 5 seconds until a long beep.
5. Virtual digits-Anti Peeping
Add any digits before and after the correct password the LockBox unlock as always
6. System Lockdown
LockBox will Lockdown for 5 minutes if entering wrong password continuously 5 times.
4. Delete All User Password
Tap + 00000 + until the blue light blinks
>. Enter admin password and press
>. When the (Enter button) blinks in green, all user passwords have been deleted.
3. Delete User Password
Tap + 2 + until the blue light blinks
>. Enter admin password and press
>. Enter the user password you wish to delete and press
>. Enter the user password again and press
>. When the (Enter button) blinks in green the password has been deleted.

11/16
10/16
App Instructions
You will see all devices on the home page.
Tap the Smart Lock Box to start operating.
Swipe the to the right to unlock.
How to unlock:

11/16
12/16
Tap “Temporary Code”
Tap “OK” to confirm and also can Tap “Share” to share this code with family or friend.
Tap “Obtain Password” to get Dynamic code which is valid for 5 minutes.
How to get Temporary code:

12/16
13/16
Tap “Member Management” to add family member or others.
Tap “+” to add member and edit member’s information and save.
How to add Members:
Member will receive an invitation on the App, after he/she accept it, Admin can find the
member in the list.

滚滚长江东逝水
13/16
14/16
Tap the Admin “Me” to add Permanent code.
Tap “Add” to enter the Permanent code you want to set or get Random Permanent code and save.
You are able to use the Permanent code to unlock the device.
How to add Permanent code:

15/16
Tap the Member you want to manage.
Tap “Add” to set the Permanent code for the Member and save.
Tap ”Effective Time” to set this Member is Permanent or Custom and save.
How to manage Members:
Set the validity period of Custom Member(Year/Month/Day/Hour/Minute).
Members have no permission to access admin.

You will find out when and whom opened the Keybox.
Tap to check the Log.
How to check Opening Log:
16/16

16/16
31 Building, Shahe Rd, Longgang District, Shenzhen 518115, China Copyright @ 2016 - 2022 OMFOCUS TECH. All rights reserved.
www.omconnect.com / www.omuark.com