One Forall Cordless Audio Video Sender User manual

SV-1700
701895
DK
E
F
D
I
NL
N
GR
P
SF
S
UK
Cordless Audio Video Sender

WWW.ONEFORALL.COM 3
TRANSMITTER
RECEIVER
PICTURE 2
c: adapter
AUDIO
LEFT
CHANNEL
1234 4/8
SEC VIDEOAUDIO
RIGHT
AUDIO
LEFT
CHANNEL
1234
VIDEOAUDIO
RIGHT
1234 5
DC IN
DC IN
VCR, DVD, SAT / CBL
LINE OUT LINE IN
PICTURE 1
PICTURE 3
PICTURE 4
PICTURE 5
PICTURE 6
TV
OFF • ON
X2
1234 4/8
OFF•ON AUDIO
LEFT
CHANNEL SEC VIDEOAUDIO
RIGHT
1234 5
DC IN
a: CHANNEL b: RCA
IR Eye
1
3
4
5
6
2

WWW.ONEFORALL.COM 4
Thank you for purchasing the ONE FOR ALL Cordless Audio Video (AV)
Sender. ONE FOR ALL is continuously striving to develop, produce and
market high quality innovative products to remotely control your
equipment. We hope the Cordless AV Sender will give you the freedom of
wireless control. Your Cordless AV Sender can be connected to all your
audio and video equipment.
The AV Sender is a solution for distributing audio and video signals to
every place in the house without the need of wires.
The AV Sender package contains a transmitter, a receiver, an infra-red (IR)
Eye, two power adapters and two SCART cables. The AV Sender enables
you to watch, hear and control your devices in all rooms of your house
without the need for wires.
The cordless technology is achieved in two ways. The transmitter sends the
audio and video signals from the source device (VCR, DVD, SATELLITE/
CABLE BOX, CAMCORDER, etc) by 2.4 GHz to the receiver that is connected
to the destination device. The built in Remote Control Extender sends the
IR signal in the opposite direction (from receiver unit to transmitter unit) at
a frequency of 433MHz.
Transmitter
The transmitter operates on 9 Volts DC 300mA that is supplied by the
AC/DC Adapter (included in package). Connecting from the audio or video
device to the transmitter is done by an RCA to SCART cable (included in
package). The Audio and/or video signals are transformed to a 2.4GHz
frequency that will be sent via the rotatable antenna.
Furthermore the transmitter transforms the Remote Control Extender
signal (at 433MHz) back to an IR command.
Receiver
The Receiver operates on 9 Volts DC 300mA that is supplied by the AC/DC
Adapter (included in package). Connecting from the audio or video device
to the receiver is done by an RCA to SCART cable (included in package).
The high frequency signal (2.4GHz) received by this unit are captured by
the rotatable antenna and will be transformed into the original audio and
video signals.
Secondly the receiver has a built in remote control extender. When an infra
red signal is received by the receiver, it will transform the IR command to
433 MHz and can be sent through walls and ceilings.
Please note that this feature may not operate on Pace Digital Cable Box
models DITV1000, DITV2000, DI1003 and any other models that use the 2-
way-TV IRDA waveform. If you are unsure of the details of your Pace
Digital Cable Box, please contact your local cable supplier.
Thank You
The Product
UK UK

WWW.ONEFORALL.COM 5
Before starting the installation make sure that both the transmitter and
receiver are switched off (see picture 1).
Put the channel selectors of the Transmitter and the Receiver on the same
channels (see picture 2:A). The receiver has dip switches. For selecting the
desired channel on the receiver place the dip switch number corresponding
to the channel on the transmitter in top position and the rest of them on
the low position.
For example, channel 3 is configured as shown here:
Connecting the Transmitter
Use the cable labeled “Transmitter”. Connect the RCA-plugs (Red, White
and Yellow) to the corresponding connectors of the transmitter unit (see
picture 2:b). Connect the SCART connector to the device that you select for
supplying the picture (source). Make sure that the SCART is connected to
the correct Output of the device, normally called “Line Out” (see picture 3).
If you wish to remotely control the source device from another room, for
example to change channels on your satellite, you will need to either:
A) Place the transmitter in front of the source device, pointing towards the
IR receiver window.
B) Connect the IR eye to the transmitter (see picture 4) and place the eye
next to the IR receiver window on the source device.
Connecting the Receiver
Use the cable labeled “Receiver”. Connect the RCA-plugs (Red, White and
Yellow) to the corresponding connectors of the receiver unit (see picture
2:b). Connect the SCART connector to the device you selected for displaying
the picture (destination). Make sure that the SCART is connected to the cor-
rect Input of the device, normally called “Line In” (see picture 5).
Insert the adapter plug into the connector on the backside (see picture 2:c).
If you want to control the source device, place the receiver on top or
beside the destination device where it is able to catch the IR command
from your remote control.
Now that both units are connected you can switch on the units using the
on/off switch (see picture 1). The red LED on the front should blink. Place
the units as high as possible to avoid interference of any kind. Rotate the
antennas in such a way that both antennas are facing each other with the
curved side. Note that the antennas cannot rotate freely over 360º, when
resistance is felt stop rotating otherwise you will damage the unit perma-
nently (see picture 6). If transmitter and receiver are placed less then 10
feet (3 meters) apart, place the antenna in the chassis (flat).
The following paragraphs contain a few examples.
Installation
Getting Started
ON DIP
12345

6WWW.ONEFORALL.COM
ON DIP
12345
Play video on the VCR (source) in the living room and watch the
picture on the TV (destination) in the bedroom.
Connect the transmitter to the VCR and the receiver to the TV in the
bedroom. Switch on the video. Place the Transmitter or the IR eye in front
of the Video. Switch on the TV in the bedroom. Select the mode on the TV
for “Line In” (AV, EXT or channel 0). Start playing the VCR by aiming the
VCR remote control (or a universal remote control) to the receiver unit and
press play. The video should start playing and picture and sound should
appear on your bedroom TV screen.
View with camcorder (source) in the baby bedroom and watch the
picture on the TV (destination) in the living room.
Note: for this application you require another set of cables, not included in
this package. Please refer to the instruction guide of your camcorder to
determine what type of cable is required.
Connect the transmitter to the camcorder and the receiver to the TV in the
living room. Switch on the camcorder and focus on the spot that you want
to watch. Switch on the TV in the living room. Select the mode on the TV
for “Line In” (AV, EXT or channel 0). The picture and sound of the
camcorder should appear on your TV screen in the living room.
Security application.
With this product you are able to build a security system. You can receive
up to four video signals. Note that you require the same amount of
transmitters as video signals you want to receive.
Connect every transmitter to a security camera and connect the receiver to
the TV.
Select a different channel for every transmitter. On the receiver put the dip
switches to the high position if you want to monitor that picture. DIP
switch 5 is used to change the interval time from 8 seconds (in ON position)
to 4 seconds (in OFF position).
Switch on the cameras. Switch on the TV for displaying the various camera
pictures. The picture of the security cameras should appear on the TV on
interval basis.
Examples dip switches:
In this example the receiver will change channels between
channel 1 and 3 every eight seconds.
In this example the receiver will change channels between
channel 1 and 4 every four seconds.
To stop the auto sequence just select 1 channel on the receiver unit.
If no channel is selected it will turn automatically to channel 1.
ON DIP
12345

WWW.ONEFORALL.COM 7
You do not receive any signal:
1. Is the power switched on, are the adapters connected to the mains and
do the red LEDs blink?
2. Are the channel selectors on both transmitter and receiver the same?
3. Check the connections of the transmitter and receiver unit.
4. Check the connections of the devices that are connected to the AV
Sender.
5. Are all necessary devices switched on?
6. Did you switch the devices in the correct mode: ext, av, line in?
You receive a poor signal:
1. Try if changing the position of the antenna improves the quality.
2. Change to another channel on both transmitter and receiver.
3. Is the range from transmitter to receiver within 300 feet (100 meters)?
4. Is there a microwave oven between transmitter and receiver? Turn it off
or replace units in such a way that they can not interfere anymore.
You can not control the source with the IR extender:
1. Does the remote control work pointing it directly at your device
(source)?
2. Is the transmitter unit or IR Eye placed in direct sight of the source?
3. Does the red LED flash if you press a key on your remote while pointing
at the receiver unit?
General:
If your house has a heavy metal construction or is equipped with a PC
network, it can disturb the radio signal. Try to move the transmitter and
receiver to another place in the house. This should determine if your cord-
less Audio Video Sender is functioning. Even moving the units a few inches
can improve the performance. If you experience problems, try placing the
units away from electrical appliances.
Please read the instruction manual carefully. If you still experience
problems operating the Cordless Audio Video Sender you may
contact us at:
- [e-mail] (Just send blank message, you will get auto-reply)
- www.oneforall.com
After having installed your Cordless Audio Video Sender, it would be
convenient to have one single remote control for all your equipment.
ONE FOR ALL is world market leader in the field of Universal Remote
Controls. ONE FOR ALL offers a wide range of preprogrammed Universal
Remote Controls ranging from easy Zappers to models that are capable to
control all your equipment which is remote controlled. Ask your dealer for
ONE FOR ALL Universal Remote Controls and he will be happy to inform
you about our products.
Trouble Shooting
Customer Service
Universal Remotes make
your life easier

8WWW.ONEFORALL.COM
R
FUTURE
PROOF
FUTURE
PROOF
V
I
A
B
U
I
L
T
-
I
N
M
O
D
E
M
I
N
T
E
R
N
E
T
D
O
W
N
L
O
A
D
SV 9120
FUTURE
PROOF
FUTURE
PROOF
V
I
A
B
U
I
L
T
-
I
N
M
O
D
E
M
I
N
T
E
R
N
E
T
D
O
W
N
L
O
A
D
TUNERTUNERTUNERTUNER
MDMDMDMD
AMPAMPAMPAMP
Mosai Tou h
S reen

64 WWW.ONEFORALL.COM
Declaration of Conformity
I hereby declare that the product
One for All Cordless AV Sender, SV-1700 (model: TTA-20T/TTA-20R)
is in conformity with the essential requirements as described in Directive 1999/5/EC
and satisfies all the technical regulations applicable to the product within this directive
ETS300 440/2000
ETS300 683/1997
EN 300 220-1/2000
EN 60065: 1998
Equipment Class Identifier
The product is a class 2 device under the scope of the R&TTE. The frequency band
used for this product is not harmonized. No geographical restrictions are applicable for
this product.
Manufacturer:
TRANWO Technology Corp.
6F, NO49, Guangming 6th Rd.,
Jubei City, Hsinchu, Taiwan 302, R.O.C.
Point of contact:
Mr. G. Flint, Tel [phone], fax [phone], email: [email protected]
Enschede, 18 July 2001
Mr. P. Bennett
Managing Director
Übereinstimmungserklärung
Hiermit erklären wir, dass das Produkt
One For All Schnurloser Audio/Video Sender, SV1700 (modell : TTA-20T/TTA-20R)
mit den, in der Direktive 1999/5/EC bschriebenen, Grundvorraussetzungen
konform geht und alle in dieser Direktive für das Produnkt zutreffenden
technischen Bestimmungen erfüllt.
ETS300 440/2000
ETS300 683/1997
EN 300 220-1/2000
EN 60065: 1998
GeräteklassenKennung
Das Produkt ist ein Klasse 2 Gerät, unter Aufsicht der R&TTE. Das
Frequenzband ist nicht harmonisiert. Keinerlei geographische Beschränkungen
treffen für dieser Produkt zu.
Hersteller:
TRANWO Technology Corp.
6F, NO49, Guangming 6th Rd.,
Jubei City, Hsinchu, Taiwan 302, R.O.C.
Kontaktperson:
Herr G. Flint, Tel.: [phone], Fax: [phone], email: [email protected]
Enschede, 18 Juli 2001
Herr P. Bennet
Managing Direktor

SV-1700
701895
Printed on Recycled Paper
DD-1101
Guarantee UK UNIVERSAL ELECTRONICS INC./ONE FOR ALL warrants to the original purchaser that this
product will be free from defects in materials and workmanship under normal and correct use for a period of one (1)
year from the date of original purchase. This product will be replaced free of charge if it has been proven to be
defective within the one (1) year warranty period. This warranty does not cover cartons, carrying cases, batteries,
broken or marred cabinets or any other item used in connection with the product. Any further obligation than listed
above is excluded. Please notice that we need your purchase receipt so that we may establish your eligibility for
service.
GARANTIE DUNIVERSAL ELECTRONICS INC./ONE FOR ALL garantiert dem Kunden, dass dieses Produkt
bei sachgemässem und ordentlichem Gebrauch für die dauer eines Jahres volkommen frei von Defekten materieller
oder technischer Art bleiben wird, gerechnet ab Kaufdatum. Falls erwiesen werden kann, dass innerhalb der
Garantiezeit eines Jahres ein Defekt entstanden ist, wird dieses Produkt gebührenfrei ersetzt, falls besagtes Produkt
innerhalb der Garantiezeit auf Kosten des Kunden zurückgeschickt wird. Diese Garantie erstreckt sich nicht auf
Verpackungen, Transportbehältnisse, Batterien, zerbrochene oder beschädigte Gehäuse oder ander Objekte, die in
Verbindung mit dem Produkt verwendet werden. Jegliche weitere Verpflichtung als die oben aufgeführte wird
ausgeschlossen. Bitte beachten Sie, dass wir Ihren Kaufbeleg brauchen un fest zu stellen ob Sie Anspruch auf unseren
Garantieservice erheben können.
GARANTIE F UNIVERSAL ELECTRONICS INC./ONE FOR ALL garantit à l’acheteur d’origine que ce produit
est certifié franc de défauts matériels et de main d’œuvre durant une période d’un (1) an à partir de la date d’achat
original à la condition exclusive que ce produit ait été utilisé de manière normale et correcte. Ce produit sera remplacé
gratuitement s’il s’est révélé défectueux pendant la dite période d’un (1) an, produit devant être retourné à la charge du
client durant la période de garantie. Cette garantie ne saurait couvrir d’aucune manière que ce soit emballages en
carton, coffrets portables quelconques, piles, corps d`’ appareil cassé ou endommagé ou tout autre article utilisé en
combinaison avec ce produit. Nous nous réservons le droit de rejeter tout autre engagement que ceux cités plus
haut. Veuillez noter que la preuve d’achat est obligatoire afin de pouvoir déterminer votre droit à ce service.
GARANTIA EUNIVERSAL ELECTRONICS/ONE FOR ALL garantiza al comprador que este producto estará
libre de defectos materiales o de fabrcación, al menos durate 1 año desde la fecha actual de su adquisición ,y en caso
de que se utilice de un modo normal y correcto. Este producto será sustituido de forma gratuita siempre y cuando se
pueda demostrar que es defectuoso y que esto haya sucedido dentro del año de garantía, corriendo a cuenta del
comprador los gastos de su devolución. Esta garantia no cubre embalajes, maletines, envoltorios, pilas, armarios u
otros objetos utilizados en conexión con este producto. Se excluyen otras obligciones, cualesquiera que sean,
además de las mencionadas más arriba. Por favor, asegúrese de tener su recibo o ticket de compra para que podamos
establecer su legitimidad a este servicio.
GARANTIA PA UNIVERSAL ELECTRONICS INC>/ONE FOR ALL garante ao cliente a a protecção deste produto no
que respeita a defeitos de fabrico de material, dentro de um período de uso correcto e normal de 1 ano a partir da data da compra
do mesmo produto. Este produto será substituido sem qualquer encargo no caso de ter sido comprovada qualquer avaria dentro
do período de 1 ano e após o seu retorno ( custos de envio da responsabilidade do consumidor ) dentro deste mesmo prazo.
Esta garantia não cobre embalagens de cartão , caixas , pilhas, ou outros items usados em conjunto com este produto. Qualquer
outra obrigação para além daquela acima descrita não será tida em consideração. Por favor tome nota que ser-lhe á pedido o
comprovativo de compra, de forma a que possamos confirmar a sua legitimidade para este serviço.
GARANZIA I La compagnia Universal Electronics inc./ ONE FOR ALL garantisce L’ acquisto originale che
questo prodotto sarà esente da difetti di mano d’ opera dietro l’ utilizzo proprio di 1 anno. Questo prodotto sarà
sostituito gratuitamente se verrà provato che e’ diffetttoso entro l’ anno di garanzia e ovviamente accompagnato dalla
prova dello scontrino che assicura la data d’ acquisto. La garanzia non copre la scatola, L’ imballaggio, le pile o ogni altro
articolo che abbia a che vedere con il prodotto. Non ci sono ulteriori obblighi di qui sopra elencati. Vi chiediamo
cortesemente di conservare lo scontrino affinche’ noi possiamo stabilire la vostra credibilità, per richiedere un nostro
servizio.
GARANTIE NL UNIVERSAL ELECTRONICS INC./ONE FOR ALL garandeert de klant, dat dit produkt bij
normaal en correct gebruik vrij van materiële of technische defecten zal blijven voor een periode van één jaar,
gerekend vanaf de datum van aankoop. Als aangetoond kan worden dat binnen de periode van één jaar een defect is
ontstaan, zal dit produkt gratis vervangen worden als het genoemde produkt op kosten van de klant binnen de
garantieperiode teruggestuurd wordt. Deze garantie is niet van toepassing voor verpakkingen, dozen voor transport,
batterijen, gebroken of beschadigde behuizing of enig ander object, dat in verbinding met dit produkt gebruikt wordt.
Elke andere verplichting dan het bovengenoemde wordt uitgesloten. Wij maken u erop attent dat wij uw bewijs van
aankoop nodig hebben om vast te stellen of u voor deze garantieservice in aanmerking komt.