One Remote DabWiFi2 User manual

OneRemote DabWiFi2
DAB+/FM/ Internet Radio & Media Player
Modified for use with B&O remotes only
Installation Manual
30012724s1uk

1
www.oneremote.dk
Getting Started 3
Direct Control or CableLink Control ............................................................3
Connection to Bang & Olufsen Equipment 4
Set Up for Direct Control ............................................................................5
Set Up for CableLink Control .......................................................................5
Option Programming –fit the tuner to the B&O set up 6
Setup wizard 7
Access Wireless Network ............................................................................8
Connecting to a Wired Network .................................................................9
Shift to Wireless Network ...........................................................................9
Access Code...............................................................................................10
Start the Setup Wizard..............................................................................10
View SW Version and Tuner ID .................................................................10
Connection to Bang & Olufsen Equipment 11
The Direct Control Option: ........................................................................11
The CableLink Control Option: ..................................................................11
Antenna Connection 12
Source & Option Selection 13
BeoSound 5 ...............................................................................................13
BeoSound 5 Encore ...................................................................................13
BeoCenter 2...............................................................................................13
BeoSound 4 ...............................................................................................14
BeoSound 1 ...............................................................................................14
BeoSound Century.....................................................................................14
BeoSound 9000 .........................................................................................15
BeoSound 3000 BeoSound 3200 ...............................................................15
BeoSound Ouverture.................................................................................15
BeoSystem 2500 BeoCenter 2500.............................................................16
BeoCenter 2300.........................................................................................16
BeoMaster 3300........................................................................................16
BeoMaster 5500........................................................................................16
BeoMaster 3500........................................................................................17
BeoMaster 4500........................................................................................17
BeoMaster 6500........................................................................................17
BeoMaster 7000........................................................................................17
BeoCenter 8000.........................................................................................17
BeoCenter 8500 BeoCenter 9000 BeoCenter 9500 ...................................17
BeoCenter 9300.........................................................................................18
BeoSystem 3..............................................................................................18

2
www.oneremote.dk
Connection via a BeoLink Converter 1611/ 1612. 19
Connection via a BeoLink Active in any Link Room 20
Connection to a 21 Pin AV Socket on any Bang & Olufsen TV. 21
Setup the Media Player 22
Windows Media Player 11 Shared Media Set Up .....................................22
Setup Media Sharing in the MAC OS.........................................................23
Troubleshooting 24

3
www.oneremote.dk
Getting Started
This OneRemote DAB+/FM/WiFi tuner has been re-designed for operation in a Bang & Olufsen remote
control system, allowing full control with a Bang & Olufsen remote control terminal either directly or via
connection to Bang & Olufsen equipment.
Thus the tuner is BeoLink compatible.
If the Bang & Olufsen system comprises one or more link rooms in a BeoLink System, sound may be
distributed to these rooms, and in some cases –see below –the tuner might even be controlled from
there.
Operation details described below require correct connection of the tuner to the Bang & Olufsen system.
When initially powered up the DabWiFi2 tuner is programmed to be switched on by pressing bor
yon the Bang & Olufsen remote. In most cases though reprogramming shall be carried out during
this initial installation. See below.
Hereafter the daily operation shall –in most cases - be limited to selecting a pre-set favorite program.
The OneRemote DabWiFi2 tuner is supplied with a DataLink cable enabling connection to most Bang &
Olufsen radios. But some system configurations require an adaptor as shown later in this manual and
explained in detail in the Installation Manual.
Direct Control or CableLink Control
The OneRemote DabWiFi2 tuner connects to Bang & Olufsen equipment with the 7-pin DIN-cable with or
without adaptor, and through option programming it may be controlled as follows:
1. Via the tuner’s built in IR-receiver,”Direct Control”
Direct Control is used, when connection to an input with control data is not possible. The tuner is
controlled directly with a regular Bang & Olufsen remote.
2. Via the cable connected Bang & Olufsen equipment,”CableLink Control”
CableLink Control is used, when connection to an input with control data is possible with the 7-pin
DIN cable. All the control data passes through the connected Bang & Olufsen equipment.
B&O Remote control model
Source
Beo4, Beo5, Beo6 or BeoOne
b
Beolink 1000
y
If DabWiFi2 is not connected to the Bang & Olufsen equipment as a b/ysource, the option
programming has to be changed to the source corresponding to the used input. Check Option
Programming below.
The OneRemote DabWiFi2 tuner is supplied initially programmed for direct control.

4
www.oneremote.dk
Connection to Bang & Olufsen Equipment
This OneRemote DabWiFi2 tuner may be connected to any Bang & Olufsen BeoSound, BeoCenter,
BeoMaster, BeoSystem or BeoVision TV and controlled with a Bang & Olufsen remote control terminal. It
may also be connected to equipment of any other brand, but it still needs to be controlled with a Bang &
Olufsen remote control terminal.
Through the years Bang & Olufsen equipment has had input sockets added, removed and renamed. A
newer Bang & Olufsen remote control has the button N.MUSIC, which is identical to SHIFT A.TAPE or
A.TAPE2 on older remotes.
Below tables, see Source & Option Selection, are showing available input sockets and their designation
on various Bang & Olufsen equipment. The tables below also show the source that has to be selected to
open a given input.
Thus with identified Bang & Olufsen equipment and the selected input socket the required option for the
tuner to be operable may be determined. Some input sockets allow for the CableLink option to be
selected, whereas most of the newer audio equipment requires the Direct Control option to be used. See
the special application with a BeoLink Converter below.

5
www.oneremote.dk
Set Up for Direct Control
The Bang & Olufsen remote terminal controls both the OneRemote DabWiFi2 tuner and the Bang &
Olufsen audio equipment.
When selecting the tuner connected source with the Bang & Olufsen remote the corresponding input
socket is opened, and the tuner is turned on simultaneously.
The tuner can be listened to in any connected link room, but not controlled from there.
Direct Control
Set Up for CableLink Control
The Bang & Olufsen remote terminal controls the OneRemote DabWiFi2 tuner via the Bang & Olufsen
audio equipment that is transmitting control data via the 7-pin DIN connection cable.
When selecting the tuner connected source with the Bang & Olufsen remote terminal the corresponding
input socket is opened, control data transmitted via the connection cable and the tuner is turned on.
Control data is only available via some input sockets in various Bang & Olufsen audio equipment.
A OneRemote DabWiFi2 tuner connected via CableLink can be controlled from any connected link room.
CableLink Control

6
www.oneremote.dk
Option Programming –fit the tuner to the B&O set up
Option programming is only required for the initial installation of the tuner. The programming itself is
carried out with a Bang & Olufsen remote, pointing directly towards the tuner. The tuner does not need
to be connected to a Bang & Olufsen device, in order to be Option programmed.
The objective is to fit the tuner’s performance to the actual audio set up.
Some installations require the tuner to be operated as an ysource, whereas in some other
installations only the Bsource might be available.
The option programming procedure is always initiated by pressing the programming switch on the
tuner’s back shortly to make it ready for programming.
The programming sequence itself using the Bang & Olufsen remote, starts off with pressing the L
key followed by 3 digits and finished by pressing the wkey.
All allowed options have a 3 digit configuration.
If the programming procedure is not successful the first time, repeating it is recommended.
Option 106 is programmed as follows:
L*1 106w
*1 Using a Beolink 1000, MK I or II Lhas to be replaced by h.
Allowed options are listed in the tables found in Source & Option Selection below.
LINK

7
www.oneremote.dk
Setup wizard
When the tuner is turned on initially,
“Setup wizard” is being displayed after
a few seconds.
The Setup Wizard is a guide through the
basic set up of the tuner.
Prior to the initial power up the tuner should be connected to the Bang & Olufsen equipment and
programmed correctly. See the chapter about Option programming.
With the Factory set option:
The tuner will power on, when bor yis pressed,
on a Bang & Olufsen remote control, pointed directly at the tuner.
Select”YES” by using A/S and confirm by pressing OO.
Select 12 or 24 hour format and
press OO.
Select automatic update via DAB or
Network and press OO.
Select correct time zone and
press OO.
Decide on automatic daylight saving
change or not and pressOO.
Select the correct WLAN region and
press OO.
Select the appropriate network SSID
and press OO.
If the selected network is not encrypted
the tuner automatically connects to the
internet and display:

8
www.oneremote.dk
With an encrypted network the required
password has to be entered via the
displayed entry screen.
Use A/S to move the cursor
to the desired character and select by
pressingOO.
WEP/WPA passwords are case sensitive!
The entered password is stored permanently,
and no re-entry is required.
The correct password has been entered.
Press OOto exit the setup wizard.
Access Wireless Network
With the Setup Wizard completed select
Station list and press OO.
Various internet sources are available:
If ‘Network error’is displayed:
-Check the router.
-Relocate the tuner to
obtain a better signal.
Check the entered password.

9
www.oneremote.dk
Connecting to a Wired Network
Connect LAN cable to the tuner’s LAN
socket. Open Main Menu by pressing
OO.
Move cursor to System settings and
select by pressing OO.
Select Network and confirm by
pressing OO.
Move cursor to Manual settings
and confirm by pressing OO.
Select Wired and then DHCP enable
and confirm by pressing OO.
Connection of the tuner to the wired LAN
has been completed.
Shift to Wireless Network
Refer to above display
Connection type
Select Wireless by pressing OO.
Select DHCP enable by pressingOO.
Enter the name of the router.
Access to the wireless network has been
established.

10
www.oneremote.dk
Access Code
With the tuner connected to a network an
access code and FAQ may be displayed.
Select Internet Radio and then Help
Select Access code and confirm by
pressing OO. The tuner’s ID is
then displayed.
Select FAQ and confirm by
pressing OO.
Start the Setup Wizard
Point at System settings and select
Setup wizard by pressingOO.
To re-start the tuner select YES and
confirm by pressing OO.
View SW Version and Tuner ID
Point at System settings then Info
and select by pressing OO.
The tuner’s software version and the ID
are being displayed.
This information may be requested when dealing with technical support issues.

11
www.oneremote.dk
Connection to Bang & Olufsen Equipment
This OneRemote DabWiFi2 tuner may be connected to any Bang & Olufsen BeoSound, BeoCenter,
BeoMaster, BeoSystem or BeoVision TV and controlled with a Bang & Olufsen remote control terminal,
but it may also be connected to equipment of any other brand and still be controlled with the Bang &
Olufsen remote control terminal.
Below tables are showing available input sockets and their designation on various Bang & Olufsen
equipment. The tables below also show the source that has to be selected to open a given input.
Thus with identified Bang & Olufsen equipment and the selected input socket the required option for the
tuner to be operable may be determined. Some input sockets allow for the CableLink option to be
selected, whereas most of the newer audio equipment requires the Direct Control option to be used.
The Direct Control Option:
The tuner is controlled directly with the Bang & Olufsen remote control terminal.
Control from a link room is not possible, although the tuner may be listened to there.
The CableLink Control Option:
The tuner is controlled with the Bang & Olufsen remote control terminal through the connected Bang &
Olufsen equipment sending control data via the connection cable. The tuner may be controlled from any
link room too.
The CableLink Control option allows for the
tuner to be listened to and controlled from any
link room.
The Direct Control option allows for the tuner
to be listened to but not controlled from any
link room.

12
www.oneremote.dk
Antenna Connection
The OneRemote DabWiFi2 tuner may be connected to any antenna picking up the FM and the DAB
frequencies.
If the FM signal strength is not sufficient the reception will be noisy.
If the DAB signal strength is not sufficient the reception is varying from disturbing ”bubbles” to complete
quietness.
The supplied ‘antenna’ is only sufficient when the tuner is situated in a location, close to the FM or DAB
transmitter. An outdoor FM+DAB antenna is often needed to obtain noiseless reception.

13
www.oneremote.dk
Source & Option Selection
The following tables show the available input sockets in various Bang & Olufsen audio and video
products, how to select them using a remote control terminal and what the corresponding option
program of the One Remote DabWiFi2 tuner should be.
The OneRemote DabWiFi2 tuner has to be programmed with the right option, to operate in the B&O
environment that it is situated.
Refer to the chapter ‘Option Programming’ above about how to enter the options from tables below, in
the tuner.
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoSound 5
MasterLink
v
T
-
410
If the MasterLink socket is
not used, the DabWiFI2
tuner might be connected
and operated via a
BeoLink Converter.
See page 15 for details on
connection of the BeoLink
Converter 1611.
f
s
-
416
a
-
412
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoSound 5
Encore
LINE-IN
B
hu
100
-
The Encore input is a mini
jack socket.
Use a OneRemote
adaptor cable, type
39207437.
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoCenter 2
AUX-IN
B
hu
100
-
The input is RCA phono sockets. Use a
OneRemote adaptor cable, type 39207438.

14
www.oneremote.dk
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoSound 4
AUX
B
hu
100
-
The input is RCA phono
sockets. Use a
OneRemote adaptor
cable, type 39207438.
MasterLink
T
v
-
410
If the MasterLink socket is
not used, the DabWiFI2
tuner might be connected
and operated via a
BeoLink Converter.
See page 15 for details on
connection of the BeoLink
Converter 1611.
f
s
-
416
a
-
412
Input
Socket
Source
Selected
Direct
Optio
n
CableLin
k Option
Remarks
BeoSound 1
AUX
B
h
u
100
-
AUX
b
y
102
-
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoSound
Century
AUX
$
K
hy
103
-
AUX
U
Y
106
-
AUX
B
hu
100
-

15
www.oneremote.dk
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoSound 9000
AUX
B
h
u
100
-
AUX
b
y
102
-
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoSound 3000
BeoSound 3200
AUX
B
hu
100
-
AUX
b
y
102
-
AUX
$
K
hy
103
-
AUX
U
Y
106
-
Input
Socket
Source Selected
Direct
Option
CableLink
Option
Remarks
BeoSound
Ouverture
AUX
$
K
hy
103
302
In the CableLink mode
numeric commands are
not accepted.
AUX
U
Y
106
206
In the CableLink mode
numeric commands are
not accepted.
AUX
B
hu
100
-
In the CableLink mode
numeric commands are
not accepted.
MasterLink
T
v
-
410
If the MasterLink socket is
not used, the DabWiFI2
tuner might be connected
and operated via a
BeoLink Converter.
See page 15 for details on
connection of the BeoLink
Converter 1611.
f
s
-
416
a
-
412

16
www.oneremote.dk
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoSystem 2500
BeoCenter 2500
AUX
B
hu
100
-
In the CableLink mode
numeric commands are
not accepted.
AUX
$
K
hy
103
302
In the CableLink mode
numeric commands are
not accepted.
AUX
U
Y
106
206
In the CableLink mode
numeric commands are
not accepted.
Input Socket
Source Selected
Direct
Option
CableLink
Option
Remarks
BeoCenter 2300
AUX
B
hu
100
300
In the CableLink mode
numeric commands are not
accepted.
AUX
b
y
102
302
In the CableLink mode
numeric commands are not
accepted.
AUX
$
K
hy
103
303
In the CableLink mode
numeric commands are not
accepted.
AUX
U
Y
106
306
In the CableLink mode
numeric commands are not
accepted.
Input Socket
Source Selected
Direct
Option
CableLink
Option
Remarks
BeoMaster 3300
BeoMaster 5500
TP
b
y
102
302
In the CableLink mode
numeric commands are not
accepted.
CD
z
104
204
In the CableLink mode
numeric commands are not
accepted.

17
www.oneremote.dk
Input Socket
Source Selected
Direct
Option
CableLink
Option
Remarks
BeoMaster 3500
BeoMaster 4500
TP1
b
y
102
302
In the CableLink mode
numeric commands are not
accepted.
CD
z
104
204
In the CableLink mode
numeric commands are not
accepted.
TP2
$
K
hy
103
302
In the CableLink mode
numeric commands are not
accepted.
PHONO
U
Y
106
206
In the CableLink mode
numeric commands are not
accepted.
Input Socket
Source Selected
Direct
Option
CableLink
Option
Remarks
BeoMaster 6500
BeoMaster 7000
TP1
b
y
102
302
CD
z
104
204
TP2
$
K
hy
103
302
PHONO
U
Y
106
206
Input Socket
Source Selected
Direct
Option
CableLink
Option
Remarks
BeoCenter 8000
TAPE2
$
K
hy
103
302
In the CableLink mode
numeric commands are not
accepted.
Input Socket
Source Selected
Direct
Option
CableLink
Option
Remarks
BeoCenter 8500
BeoCenter 9000
BeoCenter 9500
TAPE2
$
K
hy
103
302
In the CableLink mode
numeric commands are not
accepted.
AUX
B
100
-

18
www.oneremote.dk
Input Socket
Source Selected
Direct
Option
CableLink
Option
Remarks
BeoCenter 9300
PHONO
U
Y
106
In the CableLink mode
numeric commands are not
accepted.
TAPE2
$
K
hy
103
302
In the CableLink mode
numeric commands are not
accepted.
AUX
B
100
-
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoSystem2
BeoSystem 3
AV1
AV2
AV3
T
d
a
-
410
414
412
The input is a scart
socket, 21 pin AV socket.
Use a OneRemote
adaptor cable, type
39207496.
AV4
AV5
AV6
T
d
a
-
410
414
412
The input is RCA phono
sockets. Use a
OneRemote adaptor
cable, type 39207438.
MasterLink
uetc.
-
If the MasterLink socket is
not used, the DabWiFI2
tuner might be connected
and operated via a
BeoLink Converter.
See page 15 for details on
connection of the BeoLink
Converter 1611.

19
www.oneremote.dk
Connection via a BeoLink Converter 1611/ 1612.
The OneRemote DabWiFI2 tuner may be connected to a Bang & Olufsen stand-alone audio or video
master, TV, via a BeoLink Converter using MasterLink and the AAL inputs.
Connected to an audio master and programmed as a ”video source” the DabWiFI2 may be selected as
that, VMEM as an example. Connected to a video master and programmed as an “audio source” the
DabWiFI2 may be selected as that, ATAPE as an example. Notice that the Bang & Olufsen equipment has
to be programmed in option 2. See the relevant Bang & Olufsen user guide.
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoLink Converter
1611 or 1612 used
with a Bang &
Oluf-sen audio
master
and the DabWiFI2.
AAL
T
v
-
410
The DabWiFI2
connects to the
BeoLink
Converter with a
OneRemote
VSNUT adaptor
cable, type
39207434.
AAL
a
-
412
AAL
d
-
414
AAL
f
s
-
416
The BeoLink Converter 1611 connects to a stand-alone Bang & Olufsen
audio master with a MasterLink cable. Connection of more Bang &
Olufsen equipment might create control conflicts.
Input
Socket
Source
Selected
Direct
Option
CableLink
Option
Remarks
BeoLink Converter
1611 or 1612 used
with a Bang &
Olufsen TV and
the DabWiFI2.
AAL
b
y
-
402
The DabWiFI2
connects to the
BeoLink Conver-
ter with a One-
Remote ASNUT
adaptor cable,
type 39207432.
AAL
z
-
404
AAL
U
Y
-
406
AAL
u
-
408
The BeoLink Converter 1611 connects to a stand-alone Bang & Olufsen TV
with a MasterLink cable. Connection of more Bang & Olufsen equipment
might create control conflicts.