ONE 102LHS-HDCT-V7 User manual
QUICK START GUIDE
LCD HAND
SANITISER
DISPLAY
MODEL: 102LHS-HDCT-V7
LETS GET STARTED...
FILLING & MAINTENANCE
STEP 1 STEP 2
Open the front cover by
inserting the key into the
lock and turning left by
90°.
Please refer to filling and
maintenance
instructions for setting up
the dispenser and filling
the resevoir for the first
time.
Turn the unit over and
plug the power lead
(figure of 8 power
adapter) into the
transformer.
There is a cut out in the
side of the unit to bring
out the power if
mounting on a stand.
STEP 2
Put your hand below the
sensing area to get the
sanitiser.
Note: Detection range is
15-100mm
Always close and lock the
lid before trying the
dispenser as the lid can
interfer with the IR
detection.
SOFTWARE INSTRUCTIONS
The built in Plug & Play software will allow you to display one full screen image or video at a time for a specific time.
To follow this guide, you will require the Offline Playlist Editor software, you can download the installer file from the
following url...
The following content can be displayed using the DSA Plug & Play software:
MPEG-4 (.mp4) H.264 AVC (1920 x 1080), (1080 x 1920)
JPEG (Not interlaced),(1920 x 1080) , (1080 x 1920)
PNG (Not interlaced),(1920 x 1080) , (1080 x 1920)
To upload content using the plug and play software, follow the steps below:
Once downloaded and installed, double click onto the Offline Playlist icon to launch the software. The software
should load & you should be presented with the following screen:
On the left-hand side of the software window, you have various
buttons to use to modify your playlist.
Move the content to the desired position within the playlist by
using the “Move up” & “Move down” button.
Once you are ready to save your playlist, insert a blank USB stick
into your PC, then press the save button.
You should be presented with a save popup, navigate to your
USB drive and press save, this will then create the required
playlist file for the screen.
You can now plug the USB into the screen and the files will copy
and play automatically. The USB can then be removed.
Add Files
Duration
Move Up
Move Down
Apply
Delete
Open
Save
This allows you to add media files into your playlist, the software will
automatically set the duration to the time stated in the ‘Duration’ box
(described below).
The length of time that a selected piece of content will play for.
HH:MM:SS
Allows you to change the order of play for an item in the current
playlist.
Allows you to change the order of play for an item in the current
playlist.
This applies the set duration to a piece of content.
This removes the selected content from the playlist
Allows you to open a previously saved .SBP file for further
editing.
Allows you to open a previously saved .SBP file for further editing.
www.onedigitalsignage.com/support/downloads/
Note: Please only have one .SBP file on your USB stick at once. If there is more than one, the software will not know
which file to display, and will result in an error.
To Make a playlist firstly set the default duration each piece of content will be displayed for once you have done
that press “Add Files” this should open a File Explorer box for you to select the content you wish to use. Press ‘Open’
in the File Explorer box to add the item into the playlist queue. Multiple items can be inserted into the queue at
once.
Registered Office: B64 7JZ Company Registration in UK: 11178850 VAT Number: 288 6745 36
SERVICE & TECHNICAL SUPPORT
onedigitalsignage.com
Monday - Friday: 9AM - 5PM
