ONEQ Legs Mini User manual

oneQ B.V. Nederland ®
www.one-q.com
Manual
oneQ legs
(mini, standard, large, xl)
-2-
oneQ B.V. Nederland ®
www.one-q.com
01
02
03
04
“click”
“click”
fasten with knobs
place knobs
“click”
“click”
place knobs
assemble panels
with hooks
mind cris-cross
orientation of
male and female
panels
!

-3-
oneQ B.V. Nederland ®
www.one-q.com
build your oneQ set
male-panel goes into female-panel of other leg
place the under-plate
(only xl)
place in legs
(only standard & large)
05
06
07
08
assemble cross and fasten with knobs
(only standard & large)
“click”
“click”
-4-
oneQ B.V. Nederland ®
www.one-q.com
When using a standard or mini leg with a flame or glow, use the “inner-plate”. Follow step 09 & 10
When using a xl with a flame or glow, first place “oneQ separate” in step 11 & 12, and then place two
inner-plates as shown in step 09 & 10.
When you encounter any problems or you want to order spareparts, consult your oneQ dealer or
contact oneQ directly on www.one-q.com.
09
10
11
12
place “oneQ separate”
fasten with knobs
“click”
assemble inner-plate with hooks
and fasten with knobs
“click”
place inner-plate
“click”