ONESONIC BB-HD1 User manual

User Manual
BB-HD1

1 x BB-HD1.
1 x Micro USB Cable.
1 x 3.5mm Audio Cable.
1 x User Guide.
In cases where any defects occur within 12 months from the date of purchase,
Onesonic or their service partners will replace the unit with a fully operational
unit of the same type, or will provide a repair service after inspection without
charge for labour or parts. This excludes any artificial damage. The head-
phones and packaging must be kept intact and free of scratches.
1. LED Indicator
2. ANC
3. Micro USB Connector
4. LED Indicator
5. Increase Volume/Previous Song
6. Power On/Function Button
7. Decrease Volume/Next Song
8. 3.5mm Jack
9. Microphone
Packing List
Warranty
Product Functions
2

1
2
3
4
5
6
7
8
9
Product Functions
Low Battery Red LED Indicator flashes.
Charging Mode When charging mode is active the red
LED Indicator is on. When charging
is complete, the blue LED Indicator
will flash
Bluetooth Connected The blue LED Indicator flashes slowly.
Bluetooth Not Con-
nected
The blue LED Indicator flashes quickly.
Bluetooth Pairing Mode Red and blue LED Indicators flash
alternately.
LED Indicator
3

Product Specifications
Product Name ONESONIC BB-HD1
Chipset Qualcomm QCC3008
Bluetooth Version 5.0
Operating Voltage 3.7V
Battery Capacity 500mAh
Play Time 20H (Bluetooth Mode), 13H (ANC)
Charging Voltage DC 5V
Charging Interface Micro USB
Charging Time 2H
Charging Current 250mA
Bluetooth Protocol aptX, aptX Low Latency, SBC and
AAC Codecs
Bluetooth Transmission Range 10m
Speaker Impedance 32 Ohms
Speaker Size
40mm
Active Noise Reduction Average 20-25dB
Frequency Response 20Hz - 20kHz
Sensitivity 102dB ±3dB @ 1kHz
4

The indicator light on the headphone flashes red. A voice prompt will alert
you that the battery level is low. Insert the micro USB adaptor into the
headphones and connect the USB end to a power source. The LED indica-
tor light on the headphone will remain red throughout the charging process.
Once the battery is fully charged, the indicator light will remain blue.
Ensure Bluetooth is switched on and activated on the device you wish to
pair with.
Long press the power button until the read and blue LED Indicators flash
alternately. Ensure Bluetooth is activated on the device you wish to pair
with. Open the Bluetooth devices list on your device and select ‘ONESONIC
BB-HD1’. Click connect to start pairing.
Search for nearby Bluetooth devices on the device you wish to pair the BB-
HD1 with, and then pair with ‘ONESONIC BB-HD1’. Click connect to start
pairing procedure. Upon a successful connection, the blue LED Indicator
will flash slowly.
Charging Procedure
Pairing Procedure
5

Power On Long press the power button until the
blue LED Indicator turns on. A voice
prompt alerts you that the headphones
are on.
Power Off Long press the power button until the
red LED Indicator turns on. A voice
prompt alerts you that the headphones
are off.
ANC On Short press the ANC switch to turn on
ANC. The green LED Indicator is on when
ANC is active.
ANC Off Short press the ANC switch. The green
LED indicater is off when ANC is inactive.
Increase Volume Press the ‘+’ button to increase volume.
Decrease Volume Press the ‘-’ button to decrease volume.
Track Selection Long press ‘-’ for next track. Long press ‘+’
for previous track.
Play/Pause Short press the power button to pause
the music. Press again to re-activate
music playback.
Answer Call/End Call Short press the power button.
Reject Call Double press the power button.
Redial last number Double press the power button.
Operating Instructions
6

Do not use the headphones at a high volume for extended periods as hear-
ing loss may occur. Check the volume of the headphones after placing them
over the ears before playing any audio.
Do not use the headphones while driving or operating heavy machinery.
The use of headphones while operating a vehicle may be illegal in some
areas. Check and obey the applicable laws and regulations regarding the
use of headphones while operating a vehicle. Stop listening to your audio
device if you find it distracting while driving or operating any type of vehicle.
Do not use this device if you find it disruptive to any activity that requires
your full attention to ensure personal safety.
Do not use the headphones while walking in dangerous areas where full
hearing capability is required for personal safety. Example areas include
but are not limited to: construction sites, while crossing the road, at railway
intersections etc.
The headphones and accessories may present a choking hazard or cause
other injury to small children and infants. Ensure that these devices are
stored carefully in an area away from small children.
With regular usage, headphones may lead to ear infections or skin irrita-
tion. Clean the headphones regularly using a soft, lint-free cloth. Do not
get moisture in any of the openings or clean the product using aerosols,
solvents or abrasives. If skin irritation occurs, discontinue use. If the problem
persists, seek help from a qualified medical professional.
Safety Information
7