OnReal M1 User manual

User Manual
M1

1
M1
Product Manual
Content Guide
1.Product IIIustration.............................................2-3
2.How to install........................................................4-5
3.Keys and Functions.............................................6-7
4.Specifications............................................................8
5.Menu Setting Instruction................................9-16
6.Using the APP:DashCamPlayer...................17-20

2
1.Product Illustration

3
①Menu / Mode ②Up
③SOS / WIFI switch
④Down ⑤OK / Confirm ⑥Power
⑦TF slot ⑧HDMI port ⑨USB port
⑩MIC ⑪Reset ⑫Speaker
⑬Lens
⑯IPS screen
⑭Holder ⑮AV IN port

2.How to Install
4

5
1.Select and clean installation position
2.Fix car holder
3.Arrange charging cable
4.Insert car adapter to cigar lighter socket
5.Insert memory card to device
6.Insert holder to device
The text description cannot explain the installation
diagram in detail. Please search for "How to install
dash cam" on YouTube or watch the video on the
OnReal Listing page.

6
3.Keys and Functions
M
Power
Turn on
Turn off
Short press Power to turn on and
indicator lighted
Long press Power to turn off and
indicator off
Menu
Short press
Long Press
Enter the setup menu interface,
short press in the setup submenu
interface to return to the previous menu.
Enter play-back, you can view the video
and picture, short press to return to the previous menu.
There have 5 select: Front EMR Record/ Front Record/
Rear EMR Record/ Rear Record and Photo.You can play,
download or delete by moving the cursor.
Up
Playback mode
Dual-channel
video mode
Press the button to switch the preview screen,
switch to picture in picture and display single
cameras video.
Press the button to select up.
Single video
mode Long press mute/unmute

7
！
Down
Playback mode Press the button to select down
Taking Picture Short press during recording
Emergency
Short press Emergency button for lock current video
during recording.
Short press Emergency button for record 20 seconds of
video and lock video during video mode.
Long press Emergency button to open wifi , and long press
to close wifi.
Reset
Press the reset button to restart the machine in any state.

8
4.Specifications
Chipsets
Sensor
Image Resolution
Lens
Screen
Video Resolution
Codec
File Type
Language
Storage
Power Supply
Interface
Dimensions
Color
Working Temperature
HI3559V200
OS08A10
8 Mega Pixels
6-layer glass lens
F1.8
1-ch:4K 3840*2160P@30fps, 2K 1440P@30fps,
1296P@30fps,1080P@30fps,720P@30fps
2-chs:4K+1080P
H.264
MOV
English, French, Spanish, Portuguese, German,
Italian, Simplified Chinese, Traditional Chinese,
Russian, Japanese, Polish. The defaults is English.
Support max 128GB TF card, Class 10(Not include)
250mAh Li-ion Battery
Micro-SD Card Slot,
USB, HDMI(HD OUT), AV IN
73.43*62.72*15.1mm
Black
-4°F~140°F

9
5.Menu Setting Instruction
Press the M key in the recording mode to enter the system setup
menu interface.
1.Lens switching
Set “Before”: the video front screen is enlarged in front of the
road and the rear channel is zoomed out.
Set “Back”: The video front screen is enlarged after the road,
and the front road is zoomed out.
Note:
*The system defaults to "before".
*The “Lens Switching” column will only be available
in the settings when the recorder has access to the rear camera.
2.Camera properties
1.Resolution: The video can be recorded at different resolutions
separately: 2160P30/1440P30/1296P30/1080P30/720P30. The
default resolution is 2160P30.
2.Video encode: The recorded video encoding can be set to the
encoding format of H265 and H264.
3.Distortion correction: The default is “Off” state. When set to
“On”,the distortion of the picture can be reduced.

10
3.Media
1 .Audio, can be adjust to ON or OFF, the default audio is “ON”.
2.Volume, can be adjust to: mute, low, medium, high. The default
is "medium".
3.Keytone, can be adjust to ON or OFF, the default is “ON”.
4.BootSound，can be adjust to ON or OFF, the default is “ON”.
5.Time Lapse Interval, can be adjust to: OFF, 5fp/s, 2fp/s, 1fp/s. The
default is "OFF".
6.Loop record, can be adjust to: OFF, off, 1min, 3min, 5min. The
default is "3min". For example:
When set to "3min", the recorded video saves a file in 3 minute, and
can save the video in a loop.
The system automatically deletes the video file at the earliest time.
When set to “Off”, the recording will stop and the recording will
not continue when the card is full. You must delete the video file
manually or format the card before you can continue to record and
save the video.
4.WDR: The default is "On".
5.Watermark: The default is "On". Turn off all watermark
information after setting "Off".

11
1.Luminaire frequency
Can be adjust to 50Hz, 60Hz with your local source frequency.
The default is 60Hz.
2.Time zone setting
You can set the time zone of the current location manually. The
defaults to UTC/GMT+8.
3.Speed Unit
can be set to: KM/H, MPH. The default is KM/H.
4.Screen Domant
can be adjust to: OFF, 1min, 3min, 5min. The default is "1min".
For example:
1.Setting for 1min, the dash cam does not do any operation,
the screen will turned off and goes to sleep after 1 minute.You
can check the recording status by looking at the green indicator
in the upper left corner:
*Frequent flashing indicates that recording is ON.
*Always on indicates that recording is STOP.
2.Setting for “OFF”, the screen will not go out to sleep, it will
light up.

12
5.Auto Power Off
can be adjust to: OFF, 3min, 5min, 10min. The default is "OFF".
6.USB Mode
can be set to: Charge, UVC, and Storage. The default is "Charge".
1.When set to "Charge", the machine plugged into the USB cable can
only be used for charging.
2.When set to "UVC", the device can be used as a PC camera when
the machine is plugged into a USB cable to connect to the computer.
3.When set to "Storage", after the machine is plugged into the
USB cable to connect to the computer, the external storage device
TF card in the machine can be read and written.
Note: To achieve UVC and storage function, the USB cable must be
equipped with data transmission.
7.G-Sensor
can be set to: OFF, Low, Middle and High. The default is "Middle".
If set to “OFF”, the device will not activate the emergency
recording function when it encounters a collision.

13
7.G-Sensor
can be set to: OFF, Low, Middle and High. The default is "Middle".
If set to “OFF”, the device will not activate the emergency
recording function when it encounters a collision.
8.Parking monitor
can be set to: OFF, Low, Middle and High. The default is "OFF".
1.When the recorder is in the off state, if there is a collision, the
recorder automatically starts and turns on the emergency recording.
2.If the recorder without external power supply, after starting the
parking monitoring video for 20 seconds, the recorder will shut
down automatically .
3.If the recorder has external power supply, after starting the parking
monitoring video for 20 seconds, the recorder will keep record.
9.Motion Detection
can be set to: OFF, Low, Middle and High. The default is "OFF".
After the recorder lens is still for about 5 seconds, if there is an
object moving in front of the lens, the recording function will be
automatically turned on.

14
10.Picture in Picture
can be adjust to ON or OFF, the default is “OFF”
1.Set to "ON", the recording interface can display the front and back
camera pictures.
2.Set to "OFF", the screen only displays the single-channel camera
picture.
3.When connect front camera only, the default is“OFF”
4.When the front and the rear are connected, the default is "ON".
11.Date/Time Setting
Setting based on local time.
Before setting the Date/Time stamp of the dash cam, go to
Time Zone Setting and select the Time Zone you are in.
E.g:Pacific Standard Time Zone is UTC/GMT-8.
12.Language
can be set to:English, French, Spanish, Portuguese, German,
Italian, Simplified Chinese, Traditional Chinese, Russian, Japanese,
Polish. The defaults is English.

15
13.GPS Info
With the GPS module connected, the OnReal M1 will release
several additional functions: Track Logger/ Speed Display/Time Sync.
Note: The GPS playback needs customized player, for windows
operating system only.Please mail us to get GPS software.
Official mailbox:[email protected]
14.Plate Number
set the license plate number of your car. If the watermark
information in the setting is on, the recorded video file will
display the license plate number.
15.Storage Space
You can check the total space, used space and the remaining of
the card in the recorder.
16.Format SD Card
1.Select “Cancel” to exit the interface, the card will not be
formatted.
2.Select “Confirm” the card will be formatted and all files in
the card will be deleted.

16
3.Regular formatting can increase the life of the SD card and
ensure the normal operation of the dash cam.
17.Reset System
1.Select “Cancel”to exit the interface.
2.Select “Confirm” to restore all modified settings to the factory
default settings, and the device will restart automatically.
18.WiFi
can be set to ON or OFF, the default audio is “OFF”.
1.Long press the emergency button or select the WiFi option in
the menu to open WiFi
2.Go to the WIFI settings page of the phone, select the WiFi name
of the dash cam (backview_xxxxxx), and enter the default
password: 88889999 to connect.(you can view the wifi name and
password in the last item in the menu settings)
19.About
you can view information about this device, such as model,
software, Kernel, WIFI SSID, WIFI password.

17
6.Using the APP:DashCamPlayer
1.Download and install the app “DashCamPlayer”---Step 1
2.Long press the emergency button or select the WiFi option in
the dash cam menu to open WiFi.
3.Go to the WIFI settings page of the phone, select the WiFi name
of the dash cam (backview_xxxxxx), and enter the default
password: 88889999 to connect.(you can view the wifi name and
password in the last item in the menu settings)---Step 2
4.Open the DashCamPlayer software, and click “Connect Recorder”
to enter the recorder preview interface---Step 3、4

18