OOMNEX MS-22S2 User manual

User Manual
MS-22S2

Preface
Dear Users,
We ’ re pleased to present to you our 2-in-1 multifunctional beauty
instrument for deep cleaning, hydration and rejuvenation, which can
effectively relieve the problems such as skin dryness, dehydration,
nutrient shortage, clogged pores and excess grease secretion. It is a
professional beauty machine, which needs to be handled by
professionals with proper training. Any improper use will result in
adverse outcomes. Therefore, we advise any personnel to read this
manual thoroughly and follow the instructions strictly before operation.
We believe our quality product will bring in good returns on your
end. Also, you can count on our worry-free after-sales service.
Thank you!

Table of Contents
Preface
Part I
Introduction
Advantages
Working Principles and Treatment Programs
Skin Cleaning and Oxygenation Treatment
Part II
1. Detailed Operations
2. Technical Parameters
3. User Contraindications
4. Dos and Don’ts
5. Troubleshooting & Solutions
6. FAQs
7. Packing List
8. Operational Diagrams

Part I
Brief Introduction
Diamond micro-dermabrasion and oxygen spray are currently the most popular beauty
machines that focus on deep cleaning, whitening and rejuvenation for skin. It ’ s an effective
replacement of manual treatment programs for cleaning, rejuvenation and hydration in beauty
salons. Moreover, it is convenient and easy to operate, which can relieve skin problems for
beauty-seekers. This instrument requires no injection, no medication, and no operation, for
which it has no side effects. It is used externally during the whole process and has an immediate
effect. Diamond microdermabrasion works to clean the grime on the epidermis through vacuum
in conjunction with the oxygen spray that can lead nutrients and oxygen into skin through high
pressure to whiten, hydrate and repair skin.
Advantages
1. This 2-in-1 multifunctional beauty instrument can solve those problems of face care.
2. A variety of operation tips, different operation tips are changed according to different
requirements.
3. Suitable for all skin, improve skin texture, and smooth fine lines
4. It is painless and non-invasive during the process. There is no healing period, which means
you can go back home as long as the treatment is finished without affecting any work and life
plans.
5. No consumption, low cost and quick returns.
6. Wilder treatment range with remarkable and immediate effects
7. Unevenness, bleeding, and swelling will not appear after treatment.
8. The special tip in diamond microdermabrasion can effectively relieve face problems to restore
cleanliness of skin.
9. Oxygen spray can lead liquid nutrients and oxygen into skin through high pressure to whiten,
hydrate and repair skin.
Skin Cleaning and Oxygenation Treatment
Working Principles
Diamond Micro-Dermabrasion
It uses a special tube, on the top of which is inlaid fine diamond particles of different thickness.
By rubbing back and forth with the vacuum suction, the shallow layer of epidermis is worn off,
which is a non-invasive physical skin abrasion. By abrading dead cells on the surface of the skin,
the regenerating ability and skin texture are improved. After treatment, the fine wrinkles will be
reduced, the skin will become smooth, and the skin will be rejuvenated. Meanwhile, it will have
the effect of lifting skin in conjunction with hand operation.
Physical effects:
The vacuum suction technology is adopted to reduce the internal air pressure, which can
effectively remove corneum, and suck out the pore waste such as blackhead and excess grease.
In this way, it can realize free substance circulation of skin. Generally, it has the effect of
dredging pores, improving pore size and brightening skin tone.

Oxygen Spray
It uses high pressure to make oxygen and water smaller than 80 μm work on skin in the form of
spray, which can lead the molecules of water and oxygen into deep skin to accelerate nutrient
absorption. It directly and quickly provides nutrients for skin by making them penetrate through
pores and skin crevice from epidermis to deep skin through high pressure to accelerate cell
regeneration and remove deep waste. Moreover, the oxygen and nutrients can stimulate the
regeneration of fiber tissue in dermis and accelerate metabolism to deliver the results of
hydrating& rejuvenating skin and removing skin yellowness.
Physical effects:
Putting the advanced technology of Pressure Swing Adsorption(PSA) into practice, the 8-
kilogram built-in high-pressure oxygen pump can quickly separate highly pure oxygen from air
and then transport the mixture of 80% pure oxygen and 0.9% water molecules to deep cells to
replace waste and toxin, by which it can promote cell metabolism to make skin have cleanliness,
clarity and glow.
Effects
1. Clean deep skin and dredge pores
2. Remove excess corneum and regulate grease secretion
3. Make nutrients absorbed in deep layer and accelerate absorption
4. Relieve rough skin and large pores
5. Remove blackheads, acne and relieve strawberry nose
6. Accelerate blood circulation and promote skin metabolism
7. Brighten skin and contract pores
Applicable Range
1. Those who have dry skin and lack nutrients
2. Those with rough skin and large pores
3. Those who have low skin absorption and lack moisture in deep skin
4. Those with dull or uneven skin tone.
5. Those who have clogged pores and excess grease secretion.
6. Those with sallow and lacklustre skin.
Inapplicable Range
1. Those who have severely sensitive skin or are having allergic reactions.
2. Those who have large wounds on face
3. Pregnant women or patients with severe heart diseases, severe hypertension, hyperglycemia,
hyperlipemia, major diseases and so on
4. Those who have skin diseases or contagious diseases
5. Those who have just taken skin booster, and micro-needle treatment or who have incisions
on skin.
Do’s and Don’ts after Operation
1. Drink more water and use sunscreen
2. Do not use irritating products such as AHA, scrubbing and exfoliating products within one
week
3. Do not stay up late, avoid drinking alcohol and smoking cigarettes and eat more fruits,
vegetables and light foods.

4. Apply face mask three days in a row
5. Wash face with lukewarm water within 3 days
Part II
1. Detailed Operation
After checking that the instrument is connected properly, the following starting interface will
appear when the power supply is turned on.
①Function Selection
home button and reset button
time adjustment and display
start/pause button
detailed display of suction level (adjust the suction level
according to individual endurance and the situation of skin blockage. It is recommended that
suction be set at the lowest level for the first-time users. After users adapt to it, the suction can
be increased slowly)
② Detailed Operation of Diamond Micro-Dermabrasion

Press to enter the following interface
button for adjusting working time. Range:0-20 minutes. Recommended
time: 5-15 minutes on face.
buttons for adjusting time
start/pause button
return button
the direction in which suction level can be decreased
the direction in which suction level can be increased
choose proper tip according to the size of the treatment area of skin
the large-size tips are suitable for large area, such as eye area,
both sides of nose, cheeks and face

this kind of tips are suitable for forehead, jaw and cheeks for cleaning and
wrinkle removal
The pointy tips are suitable for removing blackheads, mites, relieving pore blockage
on nasal fossa and reducing fine lines.
Please note: check the black rubber seal and filtering cotton are installed before performing
dermabrasion treatment.
Black rubber seal(The rubber seal must be installed during the operation, otherwise there is no
suction or weakened suction.)
Filtering cotton(The filtering cotton must be installed when the treatment is performed to
prevent dirt from entering the instrument to cause damage. In addition, the cleaning effects will
be noticed through the cotton)
③Detailed Operation of Oxygen Spray
Press to enter the following interface
button for adjusting working time. Range:0-20 minutes. Recommended
time: 5-15 minutes on face.
buttons for adjusting time

start/pause button
return button
2. Technical Parameters
Vacuum Therapy Parameters
Power: 60W
Pressure: >250kPa
Air flow: >10L/minute
Noise level: <70dB (30cm away)
3. User Contraindications
Patients with the following symptoms should be cautious about using this instrument. Please
consult a doctor or a professional before using the instrument. The details are as follows:
1. Those who are in pregnancy or lactation.
2. Those with heart disease or who are equipped with pacemaker.
3. Those whose wounds have not healed and who are recovering from theoperation.
4. Those with epilepsy, severe diabetes and hyperthyroidism.
5. Those with malignant tumor, hemophilia or severe bleeding.
6. Those with skin diseases and infectious diseases.
7. Those who have metals implanted in the body such as stent, or who are sensitive to metals.
4. Dos and Don’ts
1. The plug with grounding pin must be used before the instrument is used and the power
socket of the instrument is properly grounded.
2. Ensure that the voltage of the instrument is suitable. If the voltage of the local power supply is
not stable, we suggest that the user add a voltage regulator with matching power between the
mains and the instrument.
3. In order to ensure the treatment effect and normal service life of the instrument, please use
the specified parts provided or suggested by the original manufacturer.
4. The instrument should not be placed in damp places or near water sources, and should not be
directly exposed to sunlight.
5. Do not place the instrument near a strong heat source as this may affect the service life and
normal use of the instrument.
6. Please turn off the power switch of the device, and ensure that the total power supply of the
device is turned off before the staff leaves after daily use, so as to ensure the safety of the
electrical products.
7. Use device or train device operators in strict accordance with instructions in the user manual.
8. Set the energy at the lowest level at the beginning of operation and increase the level slowly
after adapting to it.
9. Make sure the treatment area is moisturized during the operation to avoid performing the
treatment on dry skin.
10. Do not use the instrument in eyes, ears and the areas where there is skin diseases or plastic
surgery is taken.
11. Adjust the suction level according to customer’s sensation during the operation of
dermabrasion
12. Do install the rubber seal during the operation of dermabrasion. Otherwise, there is no

suction or weakened suction
13. Do install filtering cotton during the operation of dermabrasion to filter out the waste of the
skin.
14. Clean the instrument with normal saline after operation to ensure its cleanliness and
hygiene and prolong its service life.
5.Troubleshooting & Solutions
1. The instrument cannot be started, and the button light on the back of the instrument does
not work?
A. Make sure the power cord is connected to a power socket with normal power supply.
B. Check whether the fuse on the back of the instrument is loose or blown.
2.There is no suction when the diamond dermabrasion treatment is performed?
A. Please check whether the rubber seal in the wand is installed overly tight which leads to air
leakage.
B. Please check whether the rubber seal is installed
C. Please check whether the hose is connected with the main machine properly and whether
there is damage on the hose.
3. There is no spray coming out during the oxygen spray operation?
A. Please check whether the nozzle is blocked.
B. Please check whether the adjustable parts are screwed tight.
4. I can start the instrument, but the screen displays erroneous message?
A. Please unplug the power plug behind the instrument and wait for about 1 minute before
restarting the instrument.
B. If the above methods cannot solve the problem, please contact the instrument dealer for
assistance.
6. FAQs
1. Will skin become thin and sensitive after the diamond microdermabrasion treatment?
A: No. Only the corneum will be removed during the operation. Our skin will be renewed every
28 days, so this treatment will only make skin smoother with great clarity instead of being
sensitive.
2.Why do we need to exfoliate skin?
A: The corneum is a layer above the epidermis, on which the cells have completely died.
Depending on different parts of the body, the corneum is composed of 15 to 20 layers of dead
cells. Human skin has a metabolic cycle which is normally 28 days. It is also the metabolic cycle
of people in adolescence. If you are an adult, your metabolic cycle should be 10 days more than
your age value. However, due to various reasons, it is possible that the aging and dead cells can
not fall off in time, which will result in corneum hypertrophy. In addition, skin’s lack of clarity will
affect the skin color and the metabolic renewal of the skin. Therefore, in the case that there is
no way to normally complete this normal metabolic process, it is necessary to use artificial
methods to achieve the goal.
3. Is there any dependence on taking this treatment?
A: No dependence. This is aimed at refining and cleaning the skin, which is a kind of preservation
approach that helps skin avoid problems caused by other factors, helps the skin absorb nutrients,
relieves skin dullness, dryness and roughness and wrinkles. If you do not take this treatment in