OPENTEXT Tableau Forensic TX1 User manual

QUICK
REFERENCE GUIDE
Tableau Forensic TX1 Imager
BEFORE USING THE UNIT



 

security.opentext.com/tableau/download-center
 

 
TFU automatically determines if the firmware on the SD card is current or if an
update is available. If an update is available, it can be applied on command.
PRODUCT INTRODUCTION



 Source Drive(s)
 
* TX1 needs to be powered off and a Tableau PCIe Adapter is required to connect PCIe media.
** The Tableau IDE-PCIe Adapter [TDA7-5] is required to connect IDE drives.
 Destination Drive(s)
 

* With TX1 powered off, align TX1 into place on top of the TX1-S1 and then slide TX1 to lock it
in place. See product labels or User Guide for additional instructions.
 Ethernet 

 Power 
 Power On
 
USB 3.0 Accessory Ports (Optional)

 
SD Card Slot 

Status LED 


Copyright © 2021 Open Text. All Rights Reserved. Trademarks owned by Open Text.
For more information, visit: https://www.opentext.com/about/copyright-information • 09.21 | 18895.EN
opentext.com/contact
GETTING STARTED
Home Tab


Jobs Tab


Side Navigation Menu 


Clock
 
 

security.opentext.com/tableau/hardware/forensic-imagers-duplicators
CABLE RECOMMENDATIONS
For SATA/SAS Drive 

For USB Drive 

For PCIe Drive* 
For FireWire Drive 
For IDE Drive** 

Ethernet 

For Power (DC In) 
* TX1 needs to be powered off and a Tableau PCIe Adapter is required to connect PCIe media
(sold separately).
** Tableau Imager IDE Expansion Module [TDA7-5] is required for IDE drives (sold separately).
SUPPORT
opentext.com/support/contact/guidance
ABOUT OPENTEXT


opentext.com
CONNECT WITH US:
OpenText CEO Mark Barrenechea’s blog
TwitterLinkedIn