OpenVox VS-GW1202-16S User manual

This document applies to OpenVox VS-GW1202-16S analog gateway.
The Default IP is 172.16.99.1, Username is admin and Password
is admin too. There are two LAN ports, you can connect gateway to
Internet through either of them and you can see the connectivity by
LED status.
Elastix Server
172.16.1.194
SIP Phone
Soft SIP Phone
VS-GW1202-16S
Internet
Analog Phone
Analog Cards
VS-GW1202-16S Connect with
Elastix
®Server
QuickStart Guide
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

QuickStart Guide
www.openvox.cn
You can quickly configure your gateway as follow steps.
Step1. Log in your gateway Web GUI.
Step2. Network Settings
If your system topology like the figure described, please enter the gateway default IP
address to login web, and click “NETWORK—>LAN Settings” to set network parameters
such as IP.
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

QuickStart Guide
www.openvox.cn
Step3. Create a SIP Endpoint in Web
Please select “SIP—>SIP Endpoints—>Add New SIP Endpoint” to set a new SIP endpoint.
The following figure shows detail information about how to set it.
About other parameters in SIP, please set by your requirements for there is no need to set
them in simple calls.
Then you should modify your Channel Settings, “ANALOG -> Channel Settings”to set Sip
Account. You can press the button .
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

QuickStart Guide
www.openvox.cn
You can choose the Sip Account that you have set up for every port.
Step4. Create a SIP Trunk in Elastix®Server
Please login your Elastix®server to create a SIP trunk (666). On Elastix®server web,
please choose “PBX—>Trunks—>Add SIP Trunk” to set like that:
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

QuickStart Guide
www.openvox.cn
Step5. Configure Outbound Routes in Elastix®Sever
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

QuickStart Guide
www.openvox.cn
Step6. Set up a call
Please add one or more sip extensions, for example 1001.
After that, you can register a soft sip phone on your PC with the name “1001”to the Elastix
Server. Then as configurations ahead, you can dial “6666”, the analog phone “666”will
rang.
If you want to dial out, you should install analog cards on your server.
www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]