Opove M3 User manual

Percussion Massage Device
INSTRUCTION
MANUAL

Thank you for purchasing OPOVE M3. This instruction
manual contains important information about safety, usage
and warranty. Use the product as described and keep this
manual for future reference.
1
1. Safety Instructions 2
2. Product Description 3
3. Packing List 4
4. Technical Parameters 4
5. Operating Instructions 5
6. Warranty 6
7. FAQ 7
Table of Content

2
The people who should not use it
Do not expose the OPOVE M3 to sun or fire. Keep it away from the heat source.
Do not immerse in water. Keep the OPOVE M3 vent free of dust and debris.
Do not use any massage attachments other than the ones provided by OPOVE.
For adult use only. Children shall not use and play with the appliance.
Use the OPOVE M3 only on the body’s soft tissue. Do not use on the Adam's
apple, axilla, genitals or any hard or bony area of the body.
Use the OPOVE M3 only on the body for no more than 20 seconds per region
continuously in case of bruising.
Check treated areas frequently and immediately stop at the first sign of pain or
discomfort.
Do not operate continuously for more than 1 hour. Allow the OPOVE M3 to rest for
5 minutes before re-using.
Do not remove screws or attempt to disassemble in case of the electric shock,
explosions, exposure to chemicals and other risks.
Never leave the charging or working OPOVE M3 unattended.
Do not place your fingers, hair, or other parts of the body near the trigger of the
OPOVE M3 while massaging, as they may cause pinched.
Charge the OPOVE M3 with the original USB cable.
Turn off the OPOVE M3 for storage or travel. Keep out of reach of children.
Patients with osteoporosis
Heart disease and those who wear electro medicine and pacemakers
Infants
Pregnant woman
Physical trauma
People who had surgery recently
Note: Please consult a doctor or technical support if you are not sure whether can use
the massager.
To protect the environment, please dispose the OPOVE M3 in accordance with
local laws and regulations.
Safety Instructions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

1 2 3 54 6
Speed setting button
Charging port
Power switch
button
Pressure indicator
Speed level
Battery indicator
Flat
Ball
Bullet
Cushion
Fork
Shovel
3
Product Description
To make it easier to understand the different usages of the massage attachments,
we simulate the force sensibility and percussion accuracy for each of them. Gener-
ally, ten out of ten, the more pointed it is, the more sensible force it has. The less
the contact area is, the more accurate percussion it provides.
Massage
attachment
For targeted precise muscle, hands, foot, and other
trigger points.
For muscles near bone, beginners and people who
are sensitive to pain
For shoulders, muscles around the iliotibial band.
For Achilles tendon, both sides of spine muscles.
For large muscles such as legs, hips,etc.
For large muscles such as chest, backs, etc.
Suggested Use
Force
Sensibility
Percussion
Accuracy

4
Packing List
Technical Parameters
Adjust Speed
Percussion Frequency
Stroke Length
Input
1-5 Speed Levels
1300-2500/min
10 mm
5V-2A
Item Net Weight 1.5lbs (680g)
Item Size 6*2.3*7.5inch (154*58*192mm)
2500mAh
Battery Capacity

Choose a suitable massage attachment according to your needs. Rotate it firmly
into the massage gun.
Step 3
5
Step 1
Step 2
Operating Instructions
Attach
Rotate the attachment
slightly and push it in.
Detach
Rotate the attachment
slightly and pull it out.
With the power switch in the ON position, the display screen lights up. Press the
Speed Setting Button once to turn the device on to Level 1, continuous short press
will increase the speed level step by step, entering the cycle of 0-5 speed levels.
The current level can be confirmed by the numbers on the display.
Hold the machine and gently apply it to the muscle groups of the body. It is recom-
mended that beginners can start with a massage head with small force sensibility,
and gradually increase it according to their own adaptation.
Charging
1.
2.
3.
4.
5.
Fully charge the device with the original USB cable and a 5V/2A adapter before
first use.
When charging, the battery indicator on the display screen is pulsating. Full charge
is indicated when the top of the battery indicator lights stop pulsating.
The average run-time is 5-8 hours depending on speed level and pressure applied
during use. And the average charging time is about 3.5 hours. If the adapter output
is less than 2A, the charging time may be extended.
Please do not use this device while charging.
Fully charge the OPOVE M3 before the long-term non-use.

6
THE WARRANTY EXCLUDES:
Warranty
With the Speed Level in 1-5 position, press and hold the Speed Setting Button for 2
seconds, the device goes into the standby mode. Switch off the device completely
by moving the Power Switch to the OFF position.
IF WITHIN 12 MONTHS FROM THE DATE OF PURCHASE, THIS PRODUCT
FAILS DUE TO A DEFECT IN MATERIAL OR WORKMANSHIP, OPOVE LIMITED
WILL REPAIR OR REPLACE THE PRODUCT, OR NECESSARY COMPONENTS,
FREE OF CHARGE.
Some states and countries do not allow a limitation of damages, so the foregoing
limitation may not apply to you.
This warranty guarantees specific legal rights, and other rights may vary from coun-
try to country and from state to state. This warranty service is available through the
operating policies and procedures of OPOVE Limited and all OPOVE international
distributors. If you are a client, please contact the appropriate OPOVE business
entity, dealer or retailer, from whom you directly purchased the product for warranty
and return authorization procedures. This warranty is initiated and executed by
OPOVE Limited.
Step 4
Note:
With the standby mode, the device will go into sleep mode after 10 minutes with-
out operation. The screen light will turn off on the sleep model. Press and hold the
Speed Setting Button for 2 seconds to go into the standby mode.
•
The device will automatically turn off after 30 minutes of continuous use, subject to
the last operation. Press the Speed Setting Button again for further use.
•
a. Damage caused by accident, abuse, mishandling, or transport;
b. Units subjected to unauthorized repair or disassembly;
c. Units not used in accordance with OPOVE instructions;
d. Damage exceeding the cost of the product;
e. Deterioration of the delivered product resulting from abnormal storage and/or
safeguarding conditions on the client’s premises, and
f. Failure to provide the dated proof of purchase.

Stops working
during massage
Unable to
charge
Abnormal noise
The adapter is not compati-
ble.
7
Reasons Trouble shooting
FAQ
Questions
Power cord is not plugged
in tightly.
The battery runs out.
Touch the Speed Setting
Button or ON/OFF Power
Switch accidentally.
The pressure force is over
stall force, the device turns
off.
The device automatically
turns off after 30 minutes of
continuous use.
The attachment is not
plugged in tightly.
Make sure to use the original
USB cable and a 5V/2A adapter
during charging.
Make sure the power cord is
attached in place.
Please charge the device with
the original charger.
Please check the Speed Setting
Button and the ON/OFF power
switch.
Press the Speed Setting Button
to turn on the device again.
Please turn on the device
again.
Make sure the attachment is
attached in place.

Recipient’ s Name
Return Reason
Order ID
Note: Be assured the above info is not disclosed. It is only used for after-sales
service.
(The device is guaranteed for 12 months, from the date of purchase, providing not
damaged by the user.)
Contact Information
Recipient’ s Address
8
Warranty Card
replace repairreturn

www.opove.com
Designed by opove