OpticsPlanet OPMOD Survival Series User manual

SURVIVAL
SERIES
20-IN-1
EMERGENCY
SHOVEL
FLASHLIGHT INSTRUCTIONS
TO OPERATE:
Press and release power switch until desired mode is
reached:
Mode 1: High Lumen (240)
Mode 2: Low Lumen (100)
Mode 3: Blinker
Mode 4: SOS Light
Only the original battery can be charged inside the flashlight. Do not attempt to charge battery outside of flashlight housing. Should the battery be charged outside the
flashlight housing, or if a charger other than the supplied one is used, unpredictable and potentially dangerous results may occur.
For more information visit www.opticsplanet.com. © 2015 OpticsPlanet, Inc.
Work Lamp (White)
Power Button
Charge Socket Lithium Battery
Warning Light (Red)
Magnet
TO CHARGE:
Connect supplied USB Power Cable to flashlight
Insert other end of cable into the USB port on the supplied
charger
Insert charger into outlet via two-prong plug or into a
standard automobile outlet via 12v DC power socket
BATTERY:
Rechargeable Lithium Battery
Voltage: 3.7v
Charge Time: 4-5 Hours
Recharging Cycles: 500
SPECIFICATIONS:
Max Range: 200 Meters
Run Time (240 Lumens): 4 Hours
Run Time (100 Lumens): 8 Hours
Max Standby Time: 60 Days
Lamp Lifespan: 100,000 Hours

Designed by a team of survival experts and built to tackle any outdoor or emergency scenario, the OPMOD Survivor Series 20-in-1 Emergency
Shovel is the ultimate survival tool.
Accessing Tools:
Unscrew each handle segment by
turning counterclockwise.
Assembling Work/
Warning Light
Attach desired lamp shade to
objective end of flashlight.
Remove paracord and screw
opposite end of light into shovel
handle.
Adjusting Shovel Blade:
Pull down on collar and adjust
blade to desired position.
Release collar to lock blade
back into place.
Emergency Whistle
Screwdriver
Saw
Paracord
Ice Pick
Knife
Fire Flint
Bottle Opener
Extension Bar
Ruler
Multiple Cutting Tools:
Shovel head equipped with
built-in edges engineered for use
as a saw, knife and axe.
1
2
Wire Saw
SHOVEL INSTRUCTIONS