Optimus L-06D User manual
L-06D
INSTRUCTION MANUAL
2CTVUVCVGOGPV
&KDQJHRU0RGLILFDWLRQVWKDWDUHQRWH[SUHVVO\DSSURYHGE\WKHPDQXIDFWXUHUFRXOGYRLG
WKHXVHUVDXWKRULW\WRRSHUDWHWKHHTXLSPHQW
2CTVUVCVGOGPV
7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLPLWVIRUDFODVV%GLJLWDO
GHYLFHSXUVXDQWWR3DUWRIWKH)&&5XOHV7KHVHOLPLWVDUHGHVLJQHGWRSURYLGH
UHDVRQDEOHSURWHFWLRQDJDLQVWKDUPIXOLQWHUIHUHQFHLQDUHVLGHQWLDOLQVWDOODWLRQ7KLV
HTXLSPHQWJHQHUDWHVXVHVDQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\DQGLIQRWLQVWDOOHGDQG
XVHGLQDFFRUGDQFHZLWKWKHLQVWUXFWLRQVPD\FDXVHKDUPIXOLQWHUIHUHQFHWRUDGLR
FRPPXQLFDWLRQV+RZHYHUWKHUHLVQRJXDUDQWHHWKDWLQWHUIHUHQFHZLOOQRWRFFXULQD
SDUWLFXODULQVWDOODWLRQ,IWKLVHTXLSPHQWGRHVFDXVHKDUPIXOLQWHUIHUHQFHRUWHOHYLVLRQ
UHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQGRQWKHXVHULV
HQFRXUDJHGWRWU\WRFRUUHFWWKHLQWHUIHUHQFHE\RQHRUPRUHRIWKHIROORZLQJPHDVXUHV
5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKH
HTXLSPHQWDQGUHFHLYHU
&RQQHFWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWGLIIHUHQWIURPWKDWWRZKLFKWKH
UHFHLYHULVFRQQHFWHG
&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
(%%2CTV%NCUU$%QORNKCPEG
7KLVGHYLFHDQGLWVDFFHVVRULHVFRPSO\ZLWKSDUWRI)&&UXOHVDQG,&(6&ODVV%
GLJLWDODSSDUDWXVUHTXLUHPHQWVIRU,QGXVWU\&DQDGD2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJ
WZRFRQGLWLRQV7KLVGHYLFHDQGLWVDFFHVVRULHVPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQG
WKLVGHYLFHDQGLWVDFFHVVRULHVPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJ
LQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ
$QF[YQTP1RGTCVKQP
7KLVGHYLFHKDVEHHQWHVWHGIRUERG\ZRUQRSHUDWLRQVZLWKWKHGLVWDQFHRIFP
LQFKHVEHWZHHQWKHXVHUĜVERG\DQGWKHSKRQH7RFRPSO\ZLWK)&&5)H[SRVXUH
UHTXLUHPHQWVDPLQLPXPVHSDUDWLRQGLVWDQFHRIFPLQFKHVPXVWEHPDLQWDLQHG
IURPWKHXVHUVERG\7KLUGSDUW\EHOWFOLSVKROVWHUVDQGVLPLODUDFFHVVRULHVFRQWDLQLQJ
PHWDOOLFFRPSRQHQWVPD\QRWEHXVHG%RG\ZRUQDFFHVVRULHVWKDWFDQQRWPDLQWDLQFP
LQFKHVVHSDUDWLRQGLVWDQFHEHWZHHQWKHXVHUVERG\DQGWKHSKRQHDQGKDYHQRW
EHHQWHVWHGIRUW\SLFDOERG\ZRUQRSHUDWLRQVPD\QRWFRPSO\ZLWK)&&5)H[SRVXUHOLPLWV
DQGVKRXOGEHDYRLGHG
9+(+%CWVKQP
7KLVGHYLFHLVFDSDEOHRIRSHUDWLQJLQDQPRGH)RUDQGHYLFHVRSHUDWLQJ
LQWKHIUHTXHQF\UDQJHRI *+]WKH\DUHUHVWULFWHGIRULQGRRURSHUDWLRQVWR
UHGXFHDQ\SRWHQWLDOKDUPIXOLQWHUIHUHQFHIRU0RELOH6DWHOOLWH6HUYLFHV066LQWKH86
:,),$FFHVV3RLQWVWKDWDUHFDSDEOHRIDOORZLQJ\RXUGHYLFHWRRSHUDWHLQDQ
PRGH *+]EDQGDUHRSWLPL]HGIRULQGRRUXVHRQO\
,I\RXU:,),QHWZRUNLVFDSDEOHRIRSHUDWLQJLQWKLVPRGHSOHDVHUHVWULFW\RXU:,),XVH
LQGRRUVWRQRWYLRODWHIHGHUDOUHJXODWLRQVWRSURWHFW0RELOH6DWHOOLWH6HUYLFHV
7KLV GHYLFHLVQRWLQWHQGHGIRUVDOHLQWKH86$
Confirmation and Settings before Using
29
Confirmation and Settings before Using
There are three keys on the front of the terminal. The
roles of these keys are shown below.
Menu key
Tap this key to display the options menu for
the current screen or application.
Home key
rIf you tap this key, you will return to the
Home screen, regardless of the application
being used or the screen being displayed.
rIf you touch this key for over 1 second, the
icons of the most recently used applications
appear. Tap an icon to open the application.
(It may be displayed as horizontal screen.)
Back key
Tap this key to return to the previous screen. It
also closes a dialog box, an options menu, the
Notification panel, or the on-screen keyboard.
30
Confirmation and Settings before Using
UIM
UIM is an IC card that stores informations of each
customer.
You cannot use some of the terminal functions if the
UIM is not inserted. Before inserting or removing
the UIM, you must always turn OFF the power and
disconnect the AC adapter cable.
This terminal uses only the UIM. Bring your miniUIM/
FOMA card to a docomo Shop to exchange it.
UIM security codes
The UIM can set security code named PIN code. This
code is set to "0000" at the time of subscription, but you
may subsequently change it. For details about changing
this security code, refer to "Security Code and UIM
Protection" (P111).
Inserting the UIM
Insert a fingernail into the groove in the
back cover, and pull up in the direction
of the arrow (a) while pressing ●part
slightly to remove the back cover
31
Confirmation and Settings before Using
Remove the battery pack (P35), and
insert the UIM into the slot with the gold-
colored IC side facing down
Removing the UIM
Remove the back cover and the battery
pack. Gently press the UIM with your
fingertip and slide it out
32
Confirmation and Settings before Using
Battery Pack
Attaching the Battery Pack
Remove the back cover (P31)
Insert the battery pack in the direction of
the arrow (a) with the "CE" mark facing
up. Ensure that the tabs on the terminal
and the battery pack are aligned with
each other
Check the direction of the back cover
and attach it to the terminal (b). Press
portion to close it firmly (c)
rMake sure there is no gap between the terminal
and the back cover.
34
Confirmation and Settings before Using
Removing the Battery Pack
Remove the back cover (P31)
Put your fingernail into the groove, and
lift out the battery pack in the direction
of the arrow (b), pushing it to the
direction of the arrow (a)
Note
rTurn the power OFF before attaching/removing
the battery pack.
Charging
Battery Pack Life
rThe battery pack is a consumable accessory. The
usage time of the battery per one charge decreases
gradually each time the battery is recharged.
rWhen the usage time from one charge becomes
about half of a new battery pack, the life of the
battery pack is assumed to be almost over. We
recommend that you replace the battery ahead of
time. Refer to "Repairs" on the back of the manual
or consult a specified DOCOMO repair center for
battery exchanging information.
35
Confirmation and Settings before Using
Usage Time (estimate)
A list of the charging time (estimate) of a fully charged
battery is shown below. The usage time varies depending
on the usage conditions and the battery pack condition.
For details, refer to "Main Specifications" (P225).
Continuous
standby
time
Xi/LTE Stationary (Automatic):
Approx. 240 hours
FOMA/3G Stationary (Automatic):
Approx. 300 hours
GSM Stationary (Automatic):
Approx. 240 hours
Continuous
call time
FOMA/3G Approx. 340 minutes
GSM Approx. 240 minutes
1Seg watching time Approx. 240 minutes
36
Confirmation and Settings before Using
Turning ON/OFF the Power
Turning ON the Power
Press and hold the power key for over 1
second
Tap to release the screen lock.
Note
rThe "Locked" screen appears when the power is
turned ON or when the backlight is turned on.
rIf the screen lock has been set using a screen
unlock pattern, the "Draw pattern to unlock"
screen appears when the power is turned ON.
rIf the screen lock has been set using a PIN code
or password, the "Locked" screen appears
when the power is turned ON. After releasing
the screen lock by following Step 2, enter the
PIN code or password and tap "OK". To correct
the typing error, tap .
Turning OFF the Power
Press and hold the power key for over 1
second
"Power off"
"OK"
40
Confirmation and Settings before Using
Turning on Backlight
To prevent unintended operation and to save power,
the backlight turns off after a set period. If you then turn
on the backlight to release the screen lock, the screen
that was displayed before the backlight was turned off
appears again.
Press the power key
rThe "Locked" screen appears. The backlight
automatically lights up when you receive a call
or when alarm is ringing.
Note
rScreen gets locked if pressing the power key
while the backlight is on.
rYou can set the length of time before the
backlight turns off. For details, refer to "Display"
(P109).
rIf a screen unlock pattern has been set, you will
be prompted to enter the pattern when pressing
the power key. For more details about setting a
screen unlock pattern and releasing the screen
lock, refer to "Location & Security" (P110).
Basic Operations (Touch
Screen Operations)
The display of the terminal has a touch screen that
allows you to perform various operations by touching it.
Precautions on Using Touch Screen
The touch screen has been designed for finger touching
slightly. Do not press it with sharp objects (fingernail,
ballpoint pen, pin etc.) or press it hard with your finger.
The following user actions may cause the touch screen
not to work properly. They may also cause malfunction.
rTouching the screen with gloved hands
rTouching the screen with the tip of a fingernail
rPlacing a foreign object on the screen
rSticking a protective sheet or seal on the screen
41
Confirmation and Settings before Using
Touch Screen Operations
You can perform the following actions on the touch
screen.
rTap: Touch the screen lightly
rDouble-tap: Touch the screen lightly twice
successively
rTouch for over 1 second: Touch and hold down the
screen
rSwipe: Lightly flick the screen
rDrag: Touch and hold down to flick the screen, and
then release your finger
rPinch-out: Touch the screen with 2 fingers and then
move them apart
rPinch-in: Touch the screen with 2 fingers apart and
then move them together, as if pinching
Opening Items
Tap an item
Checking or Unchecking Options
Tap an item that has a checkbox
rIf the checkbox was unmarked, a check mark
now appears in it.
rIf the checkbox was marked, the check mark
now disappears from it.
Scrolling Screen
You can scroll the screen up or down. On some web
pages, you can also scroll side to side.
Drag up or down to
scroll.
Swipe to scroll quickly.
To stop scrolling, touch
the screen.
42
Confirmation and Settings before Using
Zooming In or Out
Some applications allow you to zoom in on small text
that is difficult to read. After zooming in, you can also
zoom out to a full-screen view.
The movement of your
fingers enlarges the
screen display by
pinching it out.
rThe movement of
your fingers reduces
the screen display by
pinching it in.
rPinch in on the Home
screen to display the
Home screen list, and
then set the Home
screen.
Note
rSometimes appears when you drag the
screen. You can also zoom in or out by tapping
this zoom control icon. Tap to zoom in by
one level. Tap to zoom out by one level.
However, or grays out if you have
already zoomed in to the maximum or zoom out
to the minimum. This grays out indicates that
you cannot zoom in or out any further.
43
Confirmation and Settings before Using
Using Motion Gesture
Various functions can be operated simply by moving the
terminal.
rTo use motion gestures, tap X"Settings" X
"Gesture" from the Home screen, and place a check
mark in each item.
Using motion gesture on alarm
Stopping alarm
Flip the terminal while alarm is ringing
rAlarm stops.
Using motion gesture while an incoming
call arrives
Muting ringtone
When an incoming call arrives, flip the
terminal
rThe ringtone is muted.
44
Confirmation and Settings before Using
Using motion gesture in gallery
Viewing previous/next image
While an image in gallery is being
displayed, tap the left or right side of the
terminal
rThe left or right image is displayed.
Changing Screen Orientation
The terminal screen automatically rotates to horizontal
(landscape) or vertical (portrait) views, depending on
the direction in which it is turned.
Note
rScreen orientation may not change in some
applications.
rYou can disable screen rotation by tapping X
"Settings" X"Display" on the Home screen, and
unmarking the "Auto-rotate screen" checkbox on
the "Display settings" screen.
45
Confirmation and Settings before Using
Initial Settings
First-time Settings
When the power is first turned ON, you need to set the
language and date for the terminal. Once you set those
settings, there is no need to set them the next time the
power is turned ON. You can also change these settings
later.
rProcedures differ depending on the connection with
network and settings. Here, an explanation is given
for the docomo Palette UI.
Press and hold the power key for over 1
second
Tap to cancel the screen lock
On the "あなたのL-06Dです。ガイドに
沿って設定をはじめましょう" screen, tap
"続ける"
"English (United States)" / "日本語" on
the "言語の選択" screen
Set each item on the "Set date & time"
screen and tap "Next"
"Mobile network or Wi-Fi" / "Wi-Fi only"
on the "Set internet connection" screen
Set each item on the "Wi-Fi settings"
screen and tap "Next"
Tap "Next" on the "Add a Google
account" screen and set by following
screen instructions
rIf you tap "Skip", you can skip the operation and
make the settings later.
"OK" on the "Software Update" screen
"Next" on the "docomo service initial
settings" screen
"Install" / "Not install" on the "Install all
apps" screen
X
"Next"
"Set"
/
"Not set"
on the
"Use Osaifu-
Keitai" screen
X
"Next"
Tap "Set" on the "docomo apps
password settings" screen, input a
docomo apps password, and then tap
"OK"
"Location providing ON" / "Location
providing OFF" / "Unknown blocking"
on the "Location providing setting"
screen
X
"Next"
"OK" on the "Complete setting" screen
46
Confirmation and Settings before Using
Configuring Wi-Fi Settings
The terminal connects to the Internet via access points
for Wi-Fi networks or public wireless LAN services.
To connect, you must configure the access point
connection settings on the terminal.
Reception interference caused by Bluetooth devices
rAs the terminal's wireless LAN devices and
Bluetooth device use the same frequency
(2.4 GHz), reception interference may occur or the
communications speed may lower. Also, you may
hear noise or have a connection problem. In these
cases, do the following:
- Keep the wireless LAN device over 10 m away
from the Bluetooth device.
- Within 10 m, turn off either the wireless LAN
device or the Bluetooth device.
Wi-Fi network status
When the terminal is connected to a Wi-Fi network,
appears in the status bar. An open network with
no security protection is detected when Wi-Fi network
notification is set to ON, always appears in the status
bar.
47
Confirmation and Settings before Using
Connecting to a Wi-Fi network
From the Home screen, X"Settings"
X"Wireless & networks"
rThe "Wireless & network settings" screen
appears.
Place a check mark on "Wi-Fi"
"Wi-Fi settings"
rThe "Wi-Fi settings" screen appears.
Tap the Wi-Fi network that you want to
connect to
rIf you try to connect to a protected Wi-Fi
network, you will be prompted to enter the
security key for that Wi-Fi network. Tap the
"Password" box, enter the network password
and tap "Connect".
rUsually, when you enter a password, the last
character entered is displayed and as many
"・" as the number of characters appear instead
of previously entered characters. All characters
can be displayed when you place a check mark
on "Show password".
Note
rThere are two types of available networks - open
networks and protected networks. The network
type is indicated by an icon to the network
name. represents an open network and
represents a protected network.
rThe icon also indicates the signal strength.
Strong signal
Weak signal
rTo search Wi-Fi network again, from the Home
screen, tap X"Settings" X"Wireless &
networks" X"Wi-Fi settings", and then tap X
"Scan".
rNetwork name does not appear depending
on the settings for the access point even if the
network is connectable. If this happens, you can
still connect to the network. Refer to "Adding a
Wi-Fi network" (P50).
rWhen establishing a Wi-Fi network connection,
the required information is generally obtained
from a DHCP server automatically. However, it is
possible to specify these items separately.
rTo check the Wi-Fi MAC address and IP
address, from the Home screen, tap X
"Settings" X"Wireless & networks" X"Wi-Fi
settings", and then tap X"Advanced".
48
Confirmation and Settings before Using
Connecting to a Wi-Fi network by
specifying a static IP address
From the Home screen, X"Settings"
X"Wireless & networks" X"Wi-Fi
settings"
rThe "Wi-Fi settings" screen appears.
X"Advanced"
Place a check mark on "Use static IP"
Tap in the order of "IP address",
"Gateway", "Netmask", "DNS 1", and
"DNS 2" to set
rA menu appears for each item. Set the
appropriate value for each item. Make sure
to enter value on "IP address", "Gateway",
"Netmask", and "DNS 1".
Notifying when Wi-Fi network with no
security protection is detected
From the Home screen, X"Settings"
X"Wireless & networks" X"Wi-Fi
settings"
rThe "Wi-Fi settings" screen appears.
Place a check mark on "Wi-Fi"
Place a check mark on "Network
notification"
rYou will be automatically notified when an open
network with no security protection is detected.
49
Confirmation and Settings before Using
Adding a Wi-Fi network
From the Home screen, X"Settings"
X"Wireless & networks" X"Wi-Fi
settings"
rThe "Wi-Fi settings" screen appears.
Place a check mark on "Wi-Fi"
"Add Wi-Fi network"
rThe "Add Wi-Fi network" menu appears.
Enter the network SSID in the "Network
SSID" box
"Security"
r"Security" menu appears. Select the appropriate
type from "Open", "WEP", "WPA/WPA2 PSK", and
"802.1x EAP".
rThe setting method differs depending on the
security settings.
"Save"
rThe Wi-Fi network is added.
Changing the Wi-Fi network password
From the Home screen, X"Settings"
X"Wireless & networks" X"Wi-Fi
settings"
rThe "Wi-Fi settings" screen appears.
Touch the Wi-Fi network name for over 1
second
rA menu appears.
"Modify network"
rThe network settings are displayed. Tap the
"Password" box and enter the new password.
Disconnecting from a Wi-Fi network
From the Home screen, X"Settings"
X"Wireless & networks" X"Wi-Fi
settings"
rThe "Wi-Fi settings" screen appears.
Touch the name of Wi-Fi network that
you want to disconnect from for over 1
second
rA menu appears.
"Forget network"
rYou are disconnected from the Wi-Fi network.
50
Confirmation and Settings before Using
Table of contents
