Opus One 165mm 2-Way Wi-Fi Ceiling Speakers User manual

165mm (6.5”) 2-Way Wi-Fi Ceiling Speakers
Operation Manual

FEATURES:
WI-FI
• Built-in Wi-Fi
• Wireless network compatibility 802.11b/g/n
• Support online audio streaming media
• Support audio format: MP3/WMA/AAC/ACC/ACC+/ALAC/APE/WAV
Amplifier:
• Type: Class D (digital)
• RMS Power: 2x 50W/8ohm
• Power input: 24Vd.c./2.5A
Speaker Specifications:
• Frequency response: 65Hz-20kHz
• RMS power: 50W
• Impedance: 8 ohms
• Sensitivity (1w/1m):90dB
• Woofer: 16.5cm (6.5”) Kevlar woven cone
• Tweeter: 1.9cm (0.75”) Titanium dome
• Treble attenuation: +3dB/-3dB
INSIDE THE PACKAGE
OPUS ONE® 165mm 2-Way Wi-Fi Ceiling Speakers
1
Mounting Hole
Cut-Out Tem pl a te
Wi-Fi Speaker Passive Speaker
Mounting Template Power supply

SPEAKER PARTS
Figure 1: Active Wi-Fi Speaker with Amplifier - Front face
Figure 2: Active Wi-Fi Speaker - Rear Face
OPUS ONE® 165mm 2-Way Wi-Fi Ceiling Speakers
2
LED Indicator
WPS Button
R+ (Red)
B- (Black)
Power Input
RCA-(Black)
RCA+(Red)
LED indicator: Indicates
the power, Wi-Fi and music
operating status.
WPS: The trigger to
configure multi-room music
network or restore the
device to original default
settings.
Power input: Connect with
adaptor to provide power for
the speakers.
R+ (Red) B-(Black): To link passive
speaker to stream stereo sound.
RCA: To connect with your home TV
set or stereo amplifier.
Environment equaliser:
Cut-Neutral-Boost

CONTROLLER APP INSTALLATION
1. Controller APP Installation - Smartsonix
2. Wi-Fi Speaker testing
Before your Wi-Fi speaker is installed into ceilings, please arrange testing to make sure the
device works properly.
OPUS ONE® 165mm 2-Way Wi-Fi Ceiling Speakers
3
Please search “Smartsonix” to
download controller app from
Google Play (Android) or Apple
App Store (IOS).
Step 3: Start the controller APP Smartsonix
and click ADD DEVICE. Please ensure
the router is within range.
Step 4: Enter the router password and click
NEXT. This will be the same
password used for other Wi-Fi devices
linked to the network.
Step 1: Connect the Wi-Fi speaker to the
power supply
Step 2: Switch on the Wi-Fi function and
connect your phone to the Wi-Fi

OPUS ONE® 165mm 2-Way Wi-Fi Ceiling Speakers
4
Step 5: Press the WPS button on the front of
the speaker to configure the network
and click NEXT.
Step 6: After the pairing is completed, the
device will be connected to your
router automatically. If this fails, click
RETRY and repeat Step 4 and Step 5.
Step 7: Name the device according to the
room you will install and click FINISH.
Step 8: After naming the rooms, the Wi-Fi
speaker will appear in the device list.
If you have more than one set of Wi-Fi
speakers, add devices and name
them accordingly. Your multi-room
music network is now established.

WI-FI SPEAKER INSTALLATION
Equipment you will need:
Besides the cut-out template that is included in the box, you must have a ladder and ideally
the equipment shown below to guarantee a safe and efficient installation.
OPUS ONE® 165mm 2-Way Wi-Fi Ceiling Speakers
5
Step 9: Choose a device and play a track from your mobile player to test whether the device
works. If playback is operating properly, the App installation process is complete. If
Playback fails, reset the settings and start again.
Square head or phillips
head screwdriver
Tape measure Speaker cable
Wire cutter/stripper
Protective eyewear
Sharp pencil Stud finder Cutting tool Power drill
Step 1: Use the enclosed template to mark
out the cut out, then simply cut along the line.
This is the only cut you will need to make.
Step 2: Mount the DC adaptor in a suitable
place in your wall or ceiling. Leave the plug
end and jack end dangling through the ceiling
hole. The adapter must be able to plug into a
mains power supply.
Cutout Diameter: Ø210mm
Installation Depth: >102mm

OPUS ONE® 165mm 2-Way Wi-Fi Ceiling Speakers
6
Diagram showing Wi-Fi speaker and passive speak-
er connected to a TV monitor. The cables shown
ought to be installed before closing the speaker
grills as per Step 5.
Step 5: Cover the speaker with the supplied grill and plug in the DC adaptor to the power
supply
Device Resetting:
If the multi-room network fails during operation, you can
press the WPS button to restore the speaker to its original
factory default settings. Uninstall the Wi-Fi speaker from
the ceiling and press the WPS button for around 5
seconds. During this operation, make sure the speaker is
power switched on.
Device Personal setting:
* Rename: If you find the Wi-Fi speaker is wrongly named after installation, you can rename
the device as you see fit using the mobile App.
* Speaker info: To protect the speaker’s Wi-Fi signal from being hacked by others, you can
set a password for your device.
Step 3: Connect the DC adaptor jack to the
Wi-Fi speaker and mount the speaker into the
ceiling. The location should suit the room you
have identified in the controller APP.
Step 4: To enjoy a superior stereo sound
quality, install the passive speaker to be
paired with the Wi-Fi speaker in the same
room. The two speakers are physically con-
nected by wires between the matching black
and red terminal points on each speaker. The
Wi-Fi main active speaker is marked R+ and
R-, and the passive speaker is marked In+
and Out-.

OPUS ONE® 165mm 2-Way Wi-Fi Ceiling Speakers
7
Airplay Function:
You can use the Wi-Fi speaker with any smart device based on the IOS operating system -
iPhone, iPad and iMac. After installing the IOS app, connect your device wirelessly to the
speaker using Wi-Fi. In the pull-up menu, click Airplay and choose the Wi-Fi speaker. Then the
audio can be steamed from your smart device.