Opus HobbyCUT A4 User manual

User’s guide HobbyCUT A4 User’s guide HobbyCUT A4
Technical Data :
Trimmer OPUS HobbyCUT A4 cuts up to 8 sheets (80 g/m²)
Cutting lenght: 320 mm
Equipped with clamp bar and metal working base
Net weight: 0.9 kg
Gross weight: 1,1 kg
26.06.2012
OPUS Sp. z o.o. ●ul. Toruńska 8 ●44 – 122 Gliwice ●www.opus.pl
User’s guide
OPUS HobbyCUT A4

User’s guide HobbyCUT A4 User’s guide HobbyCUT A4
Health & Safety precautions
•Before using the equipment please read the Health & Safety precautions,
manufacturers’ recommendations and the operating manual
•The operating manual should be available at all times for the operator to
read
•The machine is intended for cutting paper only. Untypical paper (e.g.
coated paper, chalked paper) or cardboard should be cut one by one.
•The machine should be placed out of animal’s or children’s reach
•Do not exceed maximum number of sheets during single cut
•Danger!! The machine contains sharp elements area – pay special
attention during cutting
•Pay special attention on loose-fitting clothes during operating the trimmer.
•The machine should be kept on sturdy and solid surface
Installation
Before using install plastic safety cover on the machine. Put its edges into
special holes in the housing, close to the knife.
Operation
Lift the blade up and slide the paper to be cut. Using scale adjust paper to
desired position. Press the paper to the base with your hand and put the blade
down.