Oracle MICROS Express Station 4 Series Assembly instructions

Page 1
Express Station
(Model: MICROS Express Station 4)
Basic Operation Guide

Page 2
Table of Contents
Overview of Express Station ............................................................................................................. 3
Getting to know your Express Station .......................................................................................... 3
MICROS Express Station 4 – Hardware Specification ................................................................. 6
Using Your Express Station .............................................................................................................. 7
Positioning Your MICROS Express Station 4 ............................................................................... 7
1. Mounting your Express Station on the Docking Station / Stand ............................................... 7
2. Wall Mount ................................................................................................................................ 7
Working with Windows® 10 .............................................................................................................. 8
Starting for the first time ............................................................................................................... 8
Turning off the Station .................................................................................................................. 8
Appendix – Regulatory Caution........................................................................................................ 9

Page 3
Overview of Express Station
Here introduce ORACLE new generation of Express Station, model MICROS
Express Station 4.
Getting to know your Express Station
MICROS Express Station 4 Front View
Figure 1-1: MICROS Express Station 4 Overview
Power button with LED indicator
23.8” LCD or 23.8” touch LCD
MSR (magnetic card reader) Slot (optional)
Camera (optional)

Page 4
MICROS Express Station 4 Rear View
Figure 1-2: MICROS Express Station 4 Rear View
Hook (4 in total), to install the Express Station on the Stand or VESA mount
Finger Print module (optional)

Page 5
MICROS Express Station 4 I/O View
Figure 1-3: MICROS Express Station 4 I/O View
IDN IDN port for signal output to IDN printer
COM 1 Serial port
USB3, USB4 Dual USB 3.0 port
USB1, USB2 Dual USB 2.0 port
USB 5 USB Type C port
GbE1 Gigabit LAN port

Page 6
MICROS Express Station 4 – Hardware Specification
Specification Parameter
Processor Two alternate CPU
Intel® Atom™ x7-E3950 (1.6GHz), or Intel® Atom™
x5-E3930 (1.3GHz),
Memory Installed memory (RAM) 4GB
Up to 128GB SSD
Display with touch
screen
LCD display
 Type: TFT, supports transmissive display mode
 Size: 23.8" FHD TFT LCD Display
Network Gigabit LAN
WIFI&BT (optional) 802.11a/b/g/n WIFI and Bluetooth module
RFID (optional) 13.56MHz or 125kHz
Modulation ASK
MSR (optional) Encrypting MSR
Finger print (optional) HD3D active-pixel sensing finger print module
Button/Switch One Power Button
Rating 100-240VAC, 1.7A-0.8A 50-60Hz
Weight About 5.9kg
Dimension 560 x 340 x 45 mm
Storage Temperature -25 to 70 degree Celsius
Operating Temperature 0 to 60 degree Celsius
Passively cooled
Operating Humidity Up to 90% relative humidity non condensing @ 60
Celsius

Page 7
Using Your Express Station
Positioning Your MICROS Express Station 4
1. Mounting your Express Station on the Docking Station /
Stand
1. Place the docking station on a flat surface as a table or desk.
2. Align and insert the Station on the docking plate, make sure all of four
hooks securely attach to the mounting holes of docking station.
3. The lock button firmly
Figure 2-1: Positioning the Express Station to docking station
4. Connect the AC power cable to the Express Station.
2. Wall Mount
Through the VESA mount, mount the Express Station on the shelf or wall. This
will be provided by expertise personnel.
Docking S
tat
ion
MICROS
Express
S
tation
4

Page 8
Working with Windows® 10
Starting for the first time
When you start your MICROS Express Station 4 for the first time, a series of
screens may appear to guide you configuring the basic setting of your
Windows® 10 operating system.
Follow the instructions to configure.
Once you are done configuring the basic items, a Windows® 10 Start screen
appears after successfully signing in to your user account. It helps organize all
the programs and applications you need in just one place.
Figure 2-2: Windows® 10 Start screen
Turning off the Station
Do either of the following to shut down your Station.
 Tap from the Charm bar then tap > shut down to do a normal
shutdown.
 From the log-in screen, tap > shut down.
 If your Express Station is unresponsive, press and hold the power
button for at least 4 seconds until your Express Station turns off.

Page 9
Appendix – Regulatory Caution
FCC Class A Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy, and if it is not installed and used in accordance with
the instruction manual, it may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at his own expense.
Modifications: Any modifications made to this device that are not approved by Oracle
may void the authority granted to the user by the FCC to operate this equipment.
To satisfy FCC/IC RF exposure requirements, a separate distance of 20 cm or more
should be maintained between the antenna of this device and persons during device
operation.
To ensure compliance, operation at closer than this distance is not recommended.
Les antennes installées doivent être situées de facon à ce que la population ne puisse
y être exposée à une distance de moin de 20 cm. Installer les antennes de facon à ce
que le personnel ne puisse approcher à 20 cm ou moins de la position centrale de l'
antenne.
La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d'au
moins 20 cm des personnes pendant son functionnement.
This device complies with Industry Canada's licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
(i)the device for operation in the band 5150-5250 MHz is only for indoor use to

Page
10
reduce the potential for harmful interference to co-channel mobile satellite
systems;
les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés
uniquement pour une utilisation à l'intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes
canaux;
(ii)the maximum antenna gain permitted for devices in the bands 5250-5350 MHz
and 5470-5725 MHz shall comply with the e.i.r.p. limit;
pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne
permis pour les dispositifs utilisant les bandes de 5 250 à 5 350 MHz et de 5 470 à
5 725 MHz doit être conforme à la limite de la p.i.r.e;