Orava MF-402 User manual

1EN
Milk frother
MF-402
MF-402
Instruction manual EN

2EN
1. SAFETY INSTRUCTIONS
AND WARNINGS
1.1 General safety instructions
• Before using the appliance for the first time, read the user manual
carefully and make sure you have read all the instructions.
• There is a risk of injury if the user manual and the instructions given in it
are not followed.
• This appliance, including accessories, is intended only for the purpose
specified in this manual. Never use the appliance for any other purpose.
• The manufacturer is not responsible for the use of the device that is not
in accordance with the operating instructions for operation and for non-
observance of safety instructions and warnings.
• This appliance can be used by children aged at least 8 years, if they are
supervised or have received instructions regarding the safe use of the
appliance and if they understand the risks associated with such use.
Cleaning and maintenance must not be carried out by children unless
they are at least 8 years old and under supervision. Keep the appliance
and its cord out of the reach of children under 8 years of age.
• Appliances can be used by persons with reduced physical, sensory or
mental capabilities, or with a lack of experience and knowledge, if they
have been supervised or have been instructed in the safe use of the
appliance and understand the risks associated with its use.
• Children must not play with the appliance
• This appliance is intended for household use and for similar use as:
- in kitchen corners for employees in shops, offices and other work
environments,
- on farms,
- clients in hotels, motels and other living spaces,
- in facilities providing bed and breakfast.
WARNING!
Do not insert or remove the plug of the appliance‘s power cord into or
out of the electrical outlet with wet hands or by pulling on the cord.
• Do not use the appliance and the power cord if your hands or feet are
wet.
• Do not fill the frother above the maximum level mark. If it is overfilled,
the boiling milk may overflow.
WARNING!
If the milk is hot during, handle the lid and the container carefully so as
not to burn yourself with boiling milk or steam!

3EN
WARNING!
To avoid the risk of danger due to inadvertent reset of the thermal fuse,
this appliance must not be powered by external switching devices such
as a timer, or connected to a circuit that is periodically switched on and
off with a tool.
WARNING!
While the milk is heating up in the frother, never open the lid or touch it.
• Keep pets, plants and insects away from the frother when it is on.
1.2 Safety of Use
WARNING!
If the appliance is used incorrectly, there is a risk of injury.
• Plug the appliance into a grounded electrical outlet only.
• Check whether the voltage indicated on the label of the appliance
corresponds to your electrical outlet.
• When using an extension cable, always make sure that it is not
damaged and complies with applicable standards.
• Do not leave the power cable hanging within the reach of children or
over the edge of a table or worktop, there is a serious risk of injury.
• Check the power cable regularly.
• The power cable must not be damaged by sharp or hot objects, open
fire, immersed in water or bent over sharp edges.
• Never use the appliance, stand or power cable if it is damaged, dropped
on the ground, in water, if it is not working properly. In such cases,
contact the service center to check the safety of its use.
• Do not attempt to repair the appliance yourself or modify it in any way,
contact a specialized service.
• If you notice any anomaly during operation, immediately remove the
plug from the mains.
• The appliance is NOT intended for outdoor use.
• The appliance is NOT intended for explosive environments.
• Never use the frother or the power cord in the immediate vicinity of a
bath, shower or other water source.
• Always use the appliance only with the supplied stand.
• Use the frother only for frothing milk. Do not use the appliance to heat
other liquids! Never put tea bags, loose teas or any other ingredients for
making drinks, sauces or soups into the container!

4EN
• Do not touch the rotating foam attachment, there is a risk of injury!
• Never place the foamer, base or power cable near or on heat sources
(for example, a stove,heater, induction plate, etc.) Do not place the
appliance, base on window sills, the draining plate of the sink or
unstable surfaces. Always place it on a stable, flat, dry surface.
• Do not place the appliance near or under objects that can be damaged
by steam, such as walls, kitchen cabinets, sideboards, pictures,
curtains, etc.
• Before you start using the appliance, make sure that the milk level is
between the MIN and MAX marks.
• Never move the frother while heating the milk.
• Be careful not to burn yourself with hot milk or steam when heating,
pouring milk from the container, handling.
• Do not touch the external/internal surfaces while the frother is in
operation, there is a risk of burns.
WARNING!
After using the foamer, the surface in contact with the heating element
is hot. When handling, during heating until it cools down, use only the
handle!
• Never submerge the frother, stand and power cord in water or any other
liquid, even partially!
• Only use the handle to carry, use, lift the foamer.
• Do not leave the frother unattended during its operation and check it
during the entire time of heating the milk!
• Wipe surfaces that come into contact with food with a soft sponge
slightly moistened in clean, warm water. Never use abrasives.
• If you leave the appliance unattended and do not plan to use it, or if
you plan to move it or clean it, always disconnect it from the electrical
network by pulling out the power cord.
• Do not repair or modify the appliance in any way, there is a risk of injury.
By tampering with the appliance, you run the risk of losing your legal
rights due to defective performance and warranty. Entrust all repairs to
an authorized service center.

5EN
Characteristic properties
The device is designed for frothing or heating milk for coffee.
It is suitable for preparing latte, cappuccino, frappe and other drinks based
on foamed or hot milk.
Automatic modes of operation:
- heating and foaming/heating milk (max. capacity 250 ml for heating and
foaming milk, max. capacity 350 ml for heating milk)
- milk frothing without heating (max. capacity 250 ml)
The thermostat-controlled final temperature of approx. 65 °C guarantees
an optimal temperature and prevents the milk from overheating.
Non-stick coating:
- prevents the milk from burning by putting on the heating paddle
- makes cleaning easier
Easily replaceable handpiece:
- foam attachment
Transparent top cover for better control of the process. Internal marking
of the maximum milk level. Switch, light indication of heating and foaming.
Anti-slip treatment.
Heating base with covered heating spiral. Thermally insulated outer shell.
Automatic transition to standby mode.
Also suitable for hearing-impaired customers (light indication of operation).
Protection against overheating.
The device is made of high-quality and healthy materials.

6EN
Description of parts
1. transparent lid
2. frother whisk for frothing/warming milk
3. cup
4. power base
5. on/off button, mode dial

7EN
Preparation before use
Do not connect the device to the mains during preparations.
Unpack the device and remove all packaging material from it. To remove
any dirt from the device that may have formed during the packaging
process, clean the interior, the handpieces, and the cover with a dry, lint-
free cloth. When cleaning the interior and the handpieces, be careful not
to injure yourself on sharp parts (see the „Cleaning and maintenance“
section of this manual).
Rinse the accessories in lukewarm water. Do not submerge the body of
the base in water! Clean the surface with a cloth moistened with water.
Dry all parts thoroughly.
Operation
To use the device, please follow the basic procedure below
1. Before assembling the device, disconnect the device from the mains.
Place the base with the power cord on a flat, firm and stable surface.
2. Pour the appropriate amount of milk into the container according to the
minimum and maximum marks marked on the wall inside the container
according to the desired operating mode (see the volume in the table).
3. Close the container with a lid. Place the container on the base and
connect the power cable to the mains.
4. Use the rotary control to select the desired mode (see the activity mode
table).
5. According to the selected operating mode, the indicator lights up.
4. Turn on the device by pressing the power switch 1.
6. After the end of the activity, the device turns off automatically.
Disconnect the device from the power supply.
7. Always clean the device after use according to the instructions.

8EN
Mode Function Max.
volume
foaming cold milk 250 ml
frothing/hot foam (cappucino) 250 ml
hot fl uffy foam (latte) 250 ml
heating milk (chocolate, cocoa) 350 ml
Modes of operational activity
1. Heating and foaming of milk/heating of milk
• Use the attachment for heating and frothing milk - a
wire whisk (2).
• Pour milk into the container - min. 100 ml or max.
250 ml for foaming, min. 100 ml or max. 350 ml for
heating milk.
• Select the desired mode with the rotary control
(see the activity mode table).
• Press the switch button 1 – short press
(approx. 1 second).
• After the operation, the device automatically stops
and the selected mode indicator goes out.
• The device can be switched off at any time during
operation by briefl y pressing the switch button 1.
2. Foaming of cold milk
• Use the attachment for frothing milk - a wire
whisk (2).
• Pour milk into the container - min. 100 ml or
max. 250 ml.
• Select the desired mode with the rotary control
(see the activity mode table).
• Press the power button - long press (approx. 1 second).
• After the operation, the device automatically stops and the selected
mode indicator goes out.
• The device can be turned off at any time during operation by briefl y
pressing the switch button.
Režim činností
fi lling mark
MAX. and MIN.

9EN
Tips and warnings for operation
We offer some useful tips to achieve the best results.
• Always use the device to froth or heat the milk first. During its operation,
prepare coffee or hot chocolate and serve immediately.
• For better results, use whole milk (fat content > 3.0%).
• Cold milk can also be frothed. However, this device does not cool the
milk. The temperature will be normal.
• The milk is heated to approximately 65 °C. This is the ideal
temperature, which guarantees that the taste and aroma of the coffee
will not be affected, and you do not have to wait, so you can drink the
coffee immediately.
• Keep the handpiece in a safe place. It is small and can easily get lost.
• After foaming and heating, wait about 2 minutes until the thermostat
resets and you can use the device again.
To shorten this time, rinse the container with water and wipe it after
each use.
• The device is designed for heating and frothing milk.
If you add flavorings, granulated coffee or chocolate powder, thoroughly
clean the container and attachments after use.

10EN
Serving recommendations
We offer some tips for quick and easy drinks that you can prepare with
this device.
WITH FOAMED MILK
Cappuccino
1/3 espresso
Add 2/3 of frothed milk.
Sprinkle with cocoa.
Latte macchiato
Pour the frothed milk into a tall glass.
Carefully add the espresso along the
edge of the glass.
Instant coffee
Make instant coffee.
Add frothed milk.
WITH HOT MILK
Coffe Latte
1/3 espresso
Add 2/3 of the heated milk and mix.
Hot chocolate
Pour the heated milk into a large glass.
Add the chocolate powder and mix.
Instant milk coffee
Put instant coffee granules in a cup.
Add hot milk and stir.

11EN
Cleaning of functional areas and surfaces
intended for contact with food
Warning!
• Never use sharp objects or abrasive (harsh) cleaning agents to clean
the functional surfaces and external surfaces of the device.
There is a risk of mechanical damage to the non-stick layer of the
container or scratching of the polished surface of the device.
• Do not wash the device in the dishwasher.
Before cleaning
• Turn off the device and disconnect it from the power supply. Allow the
device to cool to ambient temperature. Remove the container from the
power base. Remove the lid and gasket. Remove the attachment for
frothing/mixing milk from the bottom of the container.
Cleaning
1. Container – functional (internal) surfaces
Always clean the heating container and functional parts and surfaces
immediately after each use.
Rinse the cleaned functional surfaces with clean, warm water to remove
the residues of the cleaning detergent. Be careful not to let water get
into the electrical parts of the device.
Finally, wipe the container with a soft dry cloth or paper towel.
2. Container and power base and power cord (external surfaces)
Wipe these parts and surfaces with a soft damp cloth or paper towel.
You can use a small amount of neutral liquid detergent. After washing
the part and the surface, thoroughly wipe dry.
Warning!
Do not immerse the power base with the power cord in water or any
other liquid.
3. Lid of container, handpiece for foaming and mixing
Wash these parts under running warm water and wipe with a soft cloth
with a small amount of liquid detergent.
After removing the milk residue, rinse these parts under running warm
water to thoroughly remove the detergent residue.
Wipe all parts thoroughly or let them dry.
4. Remains of milk at the bottom of the container
If a layer of settled milk remains at the bottom of the container, pour
a small amount of warm water with liquid detergent into the container.
Leave the cleaning solution on for about ½ to 1 hour.
Then pour out the solution and wipe off the residue with a soft cloth or
sponge with adequate pressure.
Rinse/wipe the cleaned surfaces with a cloth with clean warm water
and wipe dry or allow to dry thoroughly.

12EN
Troubleshooting
A problem Cause Solution
The indicator light
does not light up, the
frother does not work.
The power cord is not
connected properly
Plug the power cord into
the outlet properly.
Bad contact between the
frother and base
Place the frother properly
on the base.
The electrical outlet is not
energized
Try using a different
outlet.
Device malfunction Call/search for service.
After starting, the fro-
ther stopped working.
Foamer (3) temperature too
high Rinse with cold water.
Foamer damaged by
immersion in water Call/search for service.
The engine does not
work. Damaged engine Call/search for service.
The handpiece does
not work.
Make sure the handpiece is
properly attached to the
shafts on the inner bottom
of the kettle.
Attach the foaming
nozzle correctly.
Make sure the handpiece is
not broken. Call/search for service.

13EN
This symbol alerts users that the device is operating a dange-
rous electrical voltage. Do not remove protective covers on the
device.Failure to observe the safety instructions during use and
operation of the device may entail:
Danger of electric shock!
Danger of serious injury or life threatening!
This symbol alerts users that the following precautions can
be avoided if the following precautions are observed when
operating and operating the device:
Danger of serious injury or life threatening! Danger of damage to
equipment or other damage to property!
This symbol used on the product replaces the sentence:
Do not immerse in water or other liquids!
Technical specifications
Power supply: 220-240 V~ 50/60 Hz
Power consumption: 500 W
Container capacity (MAX.): 350 ml
Dimensions (w x h x d): 16 x 20.5 x 14 cm
Weight: 0.95 kg
The right to make changes reserved!

14EN
This product meets all the essential requirements of the EU directives that apply to it.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED
PACKAGING
Dispose of used packaging material at a municipal waste disposal site.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on the products or in the accompanying documents means that
used electrical and electronic products should not be mixed with general
household waste. For proper disposal, recovery and recycling, please return
these products to designated collection points. Alternatively, in some countries
of the European Union or other European countries, you may return your
products to your local retailer when purchasing an equivalent new product. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment natural resources and help
prevent potential negative effects on environment and human health, which
could be the consequences of improper disposal waste. Contact your local
authority or nearest office for more details collection point. Improper disposal
of this type of waste may result in penalties in accordance with national
regulations.
For business entities in the countries of the European Union
If you wish to discard electrical and electronic equipment, please request the necessary
information from your seller or supplier.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to discard this product, please request
obtain the necessary information on the correct method of disposal from the local authorities
or from the your supplier.
Producer:
Importer:
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika
ORAVA distribution CZ, s.r.o.
Ostravská 494
739 25 Sviadnov
Česká republika
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika