Oregon Scientific Global 5-Day Weather Adviser II I600 User manual

1
EN
Global 5-Day Weather Adviser I
Model: I300
USER MANUAL
CONTENTS
Introduction .................................................................. 2
Packaging Contents ..................................................... 2
Overview ....................................................................... 3
Front View .................................................................. 3
Back View ................................................................... 3
USB Communications Hub ......................................... 4
Outdoor Thermo Sensor ............................................. 4
Getting Started ............................................................. 5
Set Up Remote Sensor .............................................. 5
Set Up Main Unit ........................................................ 6
Set Up Software (First Time Use) ................................ 6
Windows XP ............................................................... 6
Windows Vista ............................................................ 7
Disable Sleep Mode ...................................................... 7
To Disable Sleep Mode on Computer (Windows XP) ..... 7
To disable sleep mode on computer (Windows Vista) ... 7
Set Up USB Communications Hub ............................. 7
Main Unit Screen Display ........................................... 8
To Change Display Modes ........................................ 8
To View Different Warning Messages ........................ 8
Weather Forecast ....................................................... 8
Clock ............................................................................. 8
To Manually Set Clock ............................................... 8
Alarm ............................................................................. 9
To Set Alarm .............................................................. 9
To Activate / Deactivate Alarm ................................... 9
To Silence Alarm ........................................................ 9
Backlight ...................................................................... 9
Reset ............................................................................. 9
Specifications .............................................................. 9
Main Unit .................................................................... 9
Indoor Temperature .................................................... 9
Indoor Relative Humidity ............................................ 9
Usb Communications Hub ........................................ 10
Outdoor Remote Thermo Sensor ............................. 10
Clock / Calendar ....................................................... 10
Precautions ................................................................ 10
About Oregon Scientific ........................................... 11
EU-Declaration of Conformity .................................. 11
FCC Statement ........................................................... 11
Declaration of Conformity ........................................ 12

2
EN
INTRODUCTION
Thank you for selecting the Oregon Scientific™ Global
5-Day Weather Adviser I (I300).
The weather station is capable of connecting to a PC
computer using the USB connection. By installing the PC
software, world cities can be user-selectable. The software
can also download and display the latest weather data and
real time of the selected cities.
For full details see software instructions.
PC system requirements
The minimum system requirements for use of the software is:
• Operating system: Microsoft Windows XP SP2 or
Vista
• Processor: Pentium III or 4 (recommended)
• RAM: Min. 256 MB or 512 MB (recommended)
• Hard disk free space: Min. 256 MB or 512 MB
(recommended)
• Screen Display Area:1024 x 768 pixels
(recommended)
NOTE
The USB is only used for the uploading and
downloading of weather data. It is not to be used for
charging battery power.
NOTE
Please keep this manual handy as you use your
new product. It contains practical step-by-step instructions,
as well as technical specifications and warnings you
should know about.
PACKAGING CONTENTS
1x Main Unit 1x USB
Communications
Hub
1x Remote
Sensor
3 x AA
UM-3 1.5V
batteries 1x USB Cable
2 x AAA
UM-4 1.5V
Batteries

3
EN
1
2
3
4
6
7
8
9
5
1
2
3
4
5
6
7
8
9
11
10
12
13
14
OVERVIEW
FRONT VIEW
1. : Indicate AM / PM
2. : Information signal reception indicator
3. : Indicate outdoor sensor reception status
4. Current outdoor temperature (home environment)
5. : Sensor batteries low
6. Current indoor temperature / humidity (home
environment)
7. Today’s regional weather forecast (user selected
city)
8. Next 4 day regional weather forecast with HI / LO
temperature (user selected city)
9. SNOOZE · MESSAGE: Activate snooze alarm; turn on
backlight; toggle between weather warning / advisory /
clock message
10. City name / Clock / Calendar / Scrolling warning
message
11. : Indicate alarm time is displayed
12. : Indicate daily alarm is On
13. : Main unit batteries low
14. Today’s regional HI / LO temperature (user selected
city)
BACK VIEW

4
EN
1
1
3
2
1. ALARM: Change settings / display; activate /
deactivate alarm; set alarm
2. MODE: Toggle between temperature and humidity
display, set clock
3. Battery compartment
4. ºC / ºF: Select temperature unit
5. Wall mount hole
6. : Initiate sensor search; increase value of the
setting; display next city’s data
7. : Decrease value of the setting; display previous
city’s data
8. Collapsible table stand
9. RESET: Reset unit to default settings
USB COMMUNICATIONS HUB
FRONT VIEW BACK VIEW
1
1
2
3
SEARCH
Front View:
1. LED status indicator: Blink during registration
with main unit or during sensor search; indicate a
successful USB connection
Back View:
1. SEARCH: Initiate search for remote sensors
2. RESET: Reset USB Communications Hub to default
settings
3. USB port: Upload / download records to / from PC
OUTDOOR THERMO SENSOR
FRONT VIEW BACK VIEW
Front View:
1. LED status indicator: Blink when transmitting a
reading

5
EN
Back View:
1. RESET: Reset unit to default settings
2. Channel Switch
3. Battery compartment
GETTING STARTED
SET UP REMOTE SENSOR
1. Slide open the battery door.
2. Select channel.
3. Insert the batteries, matching the polarities (+ / -) and
press RESET.
4. Close the battery door.
NOTE
• Install batteries in the remote sensor before installing
the USB Communications Hub and main unit.
• Press RESET after each battery change.
5. Secure the sensor in the desired location using the
wall mount bracket.
6. Press SEARCH on USB Communications Hub to
initiate search and start receiving data from the
sensor.
NOTE
USB Communications Hub will search only for
already registered sensor or new sensor reset within last
30 minutes. To register a new sensor, reset sensor prior
to search.
7. Press and hold and on the main unit to initiate
sensor search.
For best results:
• Place the sensor within 100 m (300 ft) of the USB
Communications Hub and main unit.
• Position the sensor so that it faces the USB

6
EN
Communications Hub and main unit, minimizing
obstructions such as doors, walls and furniture.
• Place the sensor out of direct sunlight and moisture.
• Place the sensor in a location with a clear view to the
sky, away from metallic / electronic objects.
• Position the sensor close to the USB Communications
Hub and main unit during cold winter months as below-
freezing temperatures may affect battery performance
and signal transmission.
TIP
The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.
NOTE
Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.
SET UP MAIN UNIT
1. Remove the battery compartment cover.
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change.
NOTE
Batteries should not be exposed to excessive heat
such as sunshine or fire.
SET UP SOFTWARE (FIRST TIME USE)
WINDOWS XP
To install software:
1. Run CD software provided.
2. Setup wizard dialogue box will appear and guide you
through the installation process.
3. After successful installation, double click on
desktop shortcut.
4. Click DISPLAY in Oregon Weather Station dialogue
box.
Select Cities:
5. Click next to 5 day weather forecast.
6. On the new page that appears, there will be cities set
as default. To change, click CHANGE.
7. In the Settings… dialogue box, City tab, select cities
in the drop down menus (Region; Country / Area; City
/ US Zip).
8. Click OK.

7
EN
WINDOWS VISTA
To Disable User Access Control (UAC):
1. From the desktop, My Computer > Control Panel >
User Accounts and Family Safety > Change your
Windows password > Turn User Account Control
On or Off.
2. Deselect the UAC option by un-ticking.
3. Follow steps 1-8 from above section.
DISABLE SLEEP MODE
To allow for continuous update of data, ensure Sleep Mode
on computer is disabled.
TO DISABLE SLEEP MODE ON COMPUTER
(WINDOWS XP )
1. Right click on Desktop.
2. Choose “Properties”.
3. Click on “Screen Saver” Tab in the Display Properties
window.
4. Click on “Power” located at the bottom half of
window.
5. A new window “Power Options Properties” will open.
6. Under “System standby” option, choose “Never” in
drop down menu.
7. Click “Apply” and then click “OK”.
8. Previous window will return. Click “OK” to confirm and
exit.
TO DISABLE SLEEP MODE ON COMPUTER
(WINDOWS VISTA)
1. Right click on Desktop.
2. Choose “Personalize”.
3. Click on “Screen Saver” Tab in the Display Properties
window.
4. Click on “Change Power Settings” located at the bottom
half of window.
5. Select “High Performance” and click “Change plan
settings”.
6. Click “Change advanced power settings”.
7. Click “Sleep” and click “Hibernate after”.
8. Click “Setting” and set “0” minutes.
9. Click “Apply” and then “OK”.
SET UP USB COMMUNICATIONS HUB
NOTE
Set up the remote sensor before installing the USB
Communications Hub.
Approximately 30 minutes daily connection to computer
is sufficient to receive current weather data.
For conti nuo us use, al ways connect the USB
Communications Hub to the computer using the USB

8
EN
cable provided.
There is a registration mode with the main unit when the
USB Communications Hub is turned on the first time, or
after each installation.
IMPORTANT
Registration can take half an hour. Do
not turn off computer / disconnect USB from computer
during this time.
Continuous display of indicates data transfer is
successful.
MAIN UNIT SCREEN DISPLAY
TO CHANGE DISPLAY MODES
To toggle between 5 cities:
Press / .
To view alarm time and status:
Press ALARM.
To toggle between temperature and humidity
display:
Press MODE.
TO VIEW DIFFERENT WARNING MESSAGES
Press SNOOZE · MESSAGE.
WEATHER FORECAST
For your convenience there is an enclosed sheet listing
individual weather icons and their respective meanings.
The number of days with weather forecast available is
dependent on data provided by local observatories.
CLOCK
TO MANUALLY SET CLOCK
NOTE
This product is designed to synchronise its calendar
clock automatically with the information downloaded from
the PC.
1. Press and hold MODE to enter settings.
2. Press / to change settings.
3. Press MODE to confirm settings.
The settings order is: 12/24 hr format, hour, minute, year,

9
EN
month-day / day-month, month, day and language.
NOTE
The language options are English (ENG), German
(GER), French (FRE), Italian (ITA), Spanish (SPA) and
Russian (RUS).
ALARM
TO SET ALARM
1. Press ALARM to enter Alarm mode.
2. Press and hold ALARM to enter settings.
3. Press / to set hour / minute.
4. Press ALARM to confirm settings.
5. Press MODE to confirm and return to clock display.
TO ACTIVATE / DEACTIVATE ALARM
1. Press ALARM to enter Alarm mode.
2. Press ALARM repeatedly until desired option is
displayed ( / “OFF”).
3. Press MODE to confirm and return to clock display.
TO SILENCE ALARM
• Press SNOOZE · MESSAGE to silence it for 8
minutes
OR
• Press any key to turn the alarm off and activate it again
after 24 hours.
BACKLIGHT
Press SNOOZE · MESSAGE to activate LED backlight
for 8 seconds.
RESET
Press RESET to return to the default settings.
SPECIFICATIONS
MAIN UNIT
Dimensions 135 x 27 x 135 mm
(L x W x H) (5.3 x 1.1 x 5.3 in)
Weight 260 g (9.17 oz) without battery
Power 3 x UM-3 (AA) 1.5V batteries
INDOOR TEMPERATURE
Temperature unit °C / °F
Displayed range 0°C to 50°C (32°F to 122°F)
Operating range -5°C to 50°C (23°F to 122°F)
Resolution 0.1°C (0.2°F)
INDOOR RELATIVE HUMIDITY
Displayed range 2% to 98%
Operating range 25% to 90%
Resolution 1%

10
EN
USB COMMUNICATIONS HUB
Dimensions 68 x 46 x 136 mm
(L x W x H) (2.7 x 1.8 x 5.4 in)
Weight 92 g (3.2 oz) without battery
Signal frequency 433 MHz
Transmission range 100 meters (300 feet)
unobstructed
Information update Approximately every
10 minutes
Registration period Approximately 20 minutes
Power Via PC through USB cable
OUTDOOR REMOTE THERMO SENSOR
Dimensions 62 x 20 x 90 mm
(L x W x H) (2.4 x 0.8 x 3.5 in)
Weight 50 g (1.76 oz) without battery
Temperature range -20°C to 60°C (-4°F to 140°F)
Temperature resolution 0.1°C (0.2°F)
Signal frequency 433 MHz
Transmission range 100 m (300 ft) unobstructed
Transmission period Approximately every
60 seconds
Number of channels 3
Power 2 x UM-4 (AAA) 1.5V
batteries
CLOCK / CALENDAR
Clock display HH:MM
Hour format 12hr AM/PM or 24hr
Calendar DD/MM or MM/DD
PRECAUTIONS
• Do not subject the unit to excessive force, shock, dust,
temperature or humidity.
• Do not cover the ventilation holes with any items such
as newspapers, curtains etc.
• Do not immerse the unit in water. If you spill liquid over
it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive
materials.
• Do not tamper with the unit’s internal components. This
invalidates the warranty.
• Only use fresh batteries. Do not mix new and old
batteries.
• Images shown in this manual may differ from the actual
display.
• When disposing of this product, ensure it is collected
separately for special treatment and not as normal
household waste.
• Placement of this product on certain types of wood
may result in damage to its finish for which Oregon
Scientific will not be responsible. Consult the furniture