Oregon Scientific WMR89 User manual

1
USER MANUAL
Full Wireless Weather Station Kit
with USB upload
Model: WMR89 / WMR89A

1
EN
Full Wireless Weather Station Kit
with USB upload
Model: WMR89 / WMR89A
USER MANUAL
CONTENTS
Introduction............................................................... 1
Packaging contents.....................................................1
Base station ..............................................................1
Wind sensor ..............................................................1
Temperature & humidity sensor ................................1
Rain gauge................................................................2
Accessories - sensors ................................................2
Overview.......................................................................2
Top view ....................................................................2
Back view..................................................................2
LCD display...............................................................2
Wind sensor ..............................................................3
Rain gauge................................................................3
Outdoor temperature / humidity sensor ....................3
Getting started.............................................................4
Set up remote wind sensor .......................................4
Set up remote temperature / humidity sensor...........4
Set up rain gauge......................................................4
Set up base station ...................................................4
Mounting/placing of sensors......................................5
Wind sensor ..............................................................5
Temperature / humidity sensor..................................5
Rain gauge................................................................6
Backlight ......................................................................6
Clock reception............................................................6
Clock / calendar...........................................................7
Moon phase..................................................................7
Auto scanning function ..............................................7
Weather forecast .........................................................7
Temperature and humidity..........................................7
Temperature and humidity trend ...............................8
Wind chill / direction / speed......................................8
Barometer/uv/rainfall...................................................8
Barometer .................................................................9
UV index ...................................................................9
Rainfall ......................................................................9
Review stored data......................................................9
Upload data to pc software.......................................10
Reset...........................................................................10
Specications ............................................................10
Base station ............................................................10
Indoor barometer ....................................................10
Indoor temperature .................................................10
Indoor relative humidity...........................................10
Radio-controlled / atomic clock ...............................10
Remote wind sensor unit ........................................10
Outdoor temperature / humidity unit .......................10
Remote rain gauge .................................................10
Precautions................................................................11
About Oregon Scientic ........................................... 11
EU-Declaration of Conformity .................................. 11
FCC statement ...........................................................11
Disposal information for users ................................12
INTRODUCTION
Thank you for selecting the Oregon Scientic™ Full
Wireless Weather Station Kit (WMR89/WMR89A).
This system can provide you with weather information
through several sensors with high levels of accuracy. All
sensors are cabled to a transmitter box which is battery
and solar powered operated for wirelessly communicating
and displaying the data on an indoor LCD main unit.
This system records the data up to 7 days for you to
monitor and analyze the weather status. You can also
export the data to a PC by an USB cable for systematic
data management and analysis.
The base station is compatible with other sensors. To
purchase additional sensors, please contact your local
retailer.
NOTE Please keep this manual handy as you use
your new product. It contains practical step-by-step
instructions, as well as technical specifications and
warnings you should know about.
PACKAGING CONTENTS
BASE STATION
AVG
GUST
1 x base station
3 x AA
UM-3 1.5V batteries
1 x USB cable
1 x adapter
WIND SENSOR
1 x wind sensor
(1 x wind vane
above and 1 x
anemometer below)
1 x sensor
connector 2 x AA UM-3 1.5V batteries
4 x screws
(Type A) 1 x round
U- bolt
TEMPERATURE & HUMIDITY SENSOR
2 x AAA UM-4
1.5V battery
1 x wall mount
bracket
1 x temperature /
humidity sensor
1 x table stand

2
EN
RAIN GAUGE
ACCESSORIES - SENSORS
This product can work with up to 3 sensors at any one
time to capture outdoor temperature, relative humidity
or UV readings in various locations.
Visit our website weather.oregonscientic.com for more
about accessory sensors.
* Features and accessories will not be available in
all countries.
OVERVIEW
TOP VIEW
LIGHT
1234 56
1. UP / DOWN: Increase/decrease values of the selected
setting; toggle to browse outdoor channels, toggle to
browse the time history
2. MODE: Switch between the different display modes/
settings; set clock; set altitude; activate auto-scan,
press to exit the history mode
3. MAX / MIN: Read the max/min memory readings;
clear readings
4. SELECT: Switch between the different areas
5. UNIT:Select unit of measurement
6. LIGHT: Activate backlight
BACK VIEW
6
7
EU/UK
1
2
3
4
5
1. Wall mount holes
2. Battery compartment
3. SEARCH:Searches for sensors or for the radio
controlled clock signal
2 x AA UM-3
1.5V batteries
4 x screws
(Type B)
1 x rain collector
4. RESET:Returns unit to default settings
5. EU / UK switch: Select the nearest radio signal
(WMR89 only)
6. Micro USB socket
7. AC adapter socket
LCD DISPLAY
1
2
A
3
B
C
D
AVG
GUST
1. : No main power supply
2. USB: indicates a successful USB connection
3. Weather forecast
A. Temperature/Humidity/Heat index/Dew point Area
B. Wind speed/Wind direction/Wind chill area
C. Barometer/UV/Rainfall area
D. Clock/Calendar/Moon phase/History area
A. Temperature/humidity/heat index/dew point area
10
11
12
13
1
2
3
6
5
4
7
9
8
14
1. MAX/MIN temperature
2. HEAT INDEX
3. Outdoor sensor low battery display
4. Remote sensor channel indicator
5. Select indicator
6. Outdoor temperature reading (C°/F°)
7. Indoor temperature indicator
8. Main unit battery low
9. Indoor temperature reading (C°/F°)
10. Temperature trend
11. DEW POINT
12. MAX/MIN humidity
13. Humidity trend
14. Humidity reading
6 x washers

3
EN
B. Wind speed/wind direction/wind chill area
AVG
GUST
1
4
5
67 8
3
2
1. MAX wind speed memory display
2. Wind speed reading (m/s, knots, kph or mph)
3. Outdoor wind sensor low battery display
4. Wind speed indicator (AVG/GUST)
5. Wind speed level indicator
6. Wind speed level description
7. Minimum wind chill display
8. Wind direction indicator
C. Barometer/UV/Rainfall Area
8
7
1
3
4
2
56
1. Barometer/UV/rainfall reading indicator
2. Outdoor UV/rain sensor low battery display
3. ACCUM/PAST 24hrs – displays accumulative/past
24 hours rainfall
4. Barometer/UV/rainfall readings
5. UV level indicator
6. Barometric pressure/UV/rainfall units display
7. MAX barometer/UV/rainfall display
8. Barometric pressure/UV/rainfall historical bar chart display
D. Clock/calendar/moon phase area
132
6 74 5
1. History mode display
2. AM/PM
3. Time zone offset
4. Timestamp indicator
5. Clock signal reception indicator
6. Time/date/calendar
7. Moon phase
WIND SENSOR
1
2
3
4
1. Wind direction 3. Anemometer
2. Wind vane casing 4. Solar power socket
RAIN GAUGE
12
3
1. Rain gauge
2. Battery compartment
3. RESET button
1
2
1. Funnel
2. Indicator
OUTDOOR TEMPERATURE / HUMIDITY
SENSOR
1
4
2
3
1. LED status indicator
2. RESET hole
3. CHANNEL switch
4. Battery compartment

4
EN
GETTING STARTED
NOTE Install batteries in the remote sensors before the
base station matching the polarities (+ and -).
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.
SET UP REMOTE WIND SENSOR
The wind sensor takes wind speed and direction
readings. The sensor is battery operated. It is capable
of transmitting data to the base station wirelessly within
an approximate operating range of 100 meters (328 feet).
To insert batteries:
1
2
1. Unscrew the anemometer from the wind sensor
carefully.
2. Insert batteries matching the polarities (+ / -) and
replace the anemometer.
SET UP REMOTE TEMPERATURE / HUMIDITY
SENSOR
The remote sensor can collect data from up to 3 channels.
To set up the remote sensor:
1. Slide open the battery door.
2. Slide channel switch to select a channel (1/2/3). Use
a different channel for each sensor.
3. Insert the batteries, matching the polarities (+ / -).
4. Close the battery door.
SET UP RAIN GAUGE
The rain gauge collects rain and takes rainfall readings.
The sensor can remotely transmit data to the base station.
To set up the rain gauge:
2
1
1. Remove screws and slide the cover off in an upwards
motion.
2. Insert the batteries (2 x UM-3 / AA), matching the polarities
(+ / -).
3
3. Remove the bre tape.
SET UP BASE STATION
NOTE Install batteries in the remote sensors before the
base station matching the polarities (+ and -).
For continuous use, please install the AC adaptor. The
batteries are for back-up use only.
NOTE Make sure the adaptor is not obstructed and is
easily accessible to the unit.
NOTE The base station and adaptor should not be
exposed to wet conditions. No objects lled with liquid,
such as vases, should be placed on the base station
and adaptor.
To completely disconnect from power, unplug adaptor
from the mains.
To insert batteries:
EU/UK EU/UK
1. Slide open the battery door.
2. Insert the batteries, matching the polarities (+ / -).
3. Close the battery door.
NOTE Do not use rechargeable batteries. It is recommended
that you use alkaline batteries with this product for longer
performance.
NOTE Batteries should not be exposed to excessive
heat such as sunshine or re.

5
EN
The battery icon indicator appears in the
following areas:
AREA MEANING
Weather Forecast
Area It displays when the AC
adaptor is disconnected.
Temperature or
Humidity Area
Low battery in the main unit or
outdoor sensor for displayed
channel.
Wind Speed / Wind
Direction / Wind Chil
Area
Low battery in wind sensor.
UVI / Barometer /
Rainfall Area
Low battery in UV/Rain
sensor.
MOUNTING/PLACING OF SENSORS
WIND SENSOR
Make sure the wind sensor is connected to the base
station before installation.
To check the connection:
Press SELECT until the selected area icon is in the
top right display area.
• Wind speed: Gently rotate the wind vane and conrm
a numerical reading on the base station, e.g. .
• Wind direction indicator. Move the direction of the
wind indication and verify the icon moves in the same
direction .
The sensor should be positioned in an open area
away from trees or other obstructions.
To install the wind sensor:
ab
Secure the sensor connector in the desired location:
a. Align the back of the sensor connector to an existing
pole. Secure in place by inserting the ends of the
U-bolt into the holes on the sensor connector and
securing it with washers and bolts.
OR
b. Insert 4 type A screws into the holes of the sensor
connector. Screw rmly into place, i.e., fence.
Slide wind vane onto the smaller end of the sensor
connector.
IMPORTANT Make sure the wind sensor points to north
in order to record accurate readings.
TEMPERATURE / HUMIDITY SENSOR
Make sure the temperature/humidity sensor is
connected to the base station before installation.
To check the connection:
1. Press SELECT until the selected area icon is in
the bottom left display area.
2. Press UP / DOWN to select channel 1 and verify
a numerical reading.
To install the temperature/humidity sensor:
1.5 m (5 ft)
TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not
more than 1.5 meters (5 feet) and which can shield it from
direct sunlight or wet conditions for an accurate reading.

6
EN
Secure the sensor in the desired location using the wall
mount bracket or table stand.
RAIN GAUGE
The base station and rain gauge should be positioned
within an effective range: about 100 meters (328 feet)
in an open area.
The rain gauge should be mounted horizontally about
1 meter (3 feet) from the ground in an open area away
from trees or other obstructions to allow rain to fall
naturally for an accurate reading.
Make sure the rain gauge is connected to the base station
before installation.
To check the connection:
1. Press SELECT until the selected area icon is in
the middle right display area.
2. Press MODE repeatedly until displays.
3. Tilt the tipping funnel on the rain gauge several times,
wait for a few seconds and then verify a numerical
reading on the base station.
If no reading displays, press the SEARCH button on
the back of the base station to initiate a wireless sensor
search.
To ensure a level plane:
Put a few drops of water on the cross at the base of the
funnel to check the horizontal level.
1
23
4
Water will pool to the center of the cross when the rain
gauge is level.
If water remains on 1-4, the gauge is not horizontal.
If necessary, adjust the level using the screw.
NOTE For best results, ensure the base is horizontal to
allow maximum drainage of any collected rain.
TIP Press RESET button on back of the base station to
erase all testing data.
BACKLIGHT
Press LIGHT to activate the backlight for 5 seconds.
CLOCK RECEPTION
This product is designed to synchronize its calendar
clock automatically once it is brought within range of a
radio signal:
WMR89:
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
Slide the EU/UK switch to the appropriate setting based
on your location. Press RESET whenever you change
the selected setting.
WMR89A:
• WWVB-60 signal: within 3200 km (2000 miles) of Fort
Collins Colorado.
The reception icon will blink when it is searching for
a signal. If the radio signal is weak it can take up to
24 hours to get a valid signal reception. indicates the
status of the clock reception signal.
ICON MEANING
Time is synchronized.
Receiving signal is strong.
Time is not synchronized.
Receiving signal is weak.
To enable (and force a signal search when previous
search was unsuccessful)/disable the clock radio
reception:
1. Press SELECT repeatedly to navigate icon to the
clock/calendar/moon phase area.
2. Press and hold SEARCH. displays when it is
enabled.
NOTE For best reception, place the base station on a
at, non-metallic surface near a window in an upper oor
of your home. Place the antenna away from electrical
appliances do not move the antenna when searching
for a signal.

7
EN
CLOCK / CALENDAR
To set the clock manually, disable the clock signal
reception rst
To manually set the clock:
(You only need to set the clock and calendar if you have
disabled the clock radio reception.)
1. Press SELECT repeatedly to navigate icon to the
clock/calendar/moon phase area.
2. Press and hold MODE to change the clock setting.
The setting part blinks.
3. Press UP / DOWN to increase/decrease the setting
value.
4. Press MODE to conrm.
5. Repeat steps 3 – 4 to set the time zone offset hour
(+/-23 hours), 12/24 hour format, hour, minute, year,
date/month format, month, date, weekday language
and hemisphere option for moon phase.
Time zone offset sets the clock +/- 23 hours from the
received clock signal time. If you have deactivated the
clock signal reception, do not set a value for time zone.
NOTE If you enter +1 in the time zone setting, the clock
displays 1 hour ahead of your set regional time.
If you are in the US (WMR89A only) set the clock to:
PA for Pacic time MO for Mountain time
CE for Central time EA for Eastern time
NOTE The weekday is available in English (E), German
(D), French (F), Italian (I), Spanish (S) or Russian (R).
To change the clock display:
1. Press SELECT repeatedly to navigate icon to the
clock/calendar/moon phase area.
2. Press MODE to toggle between:
• Clock with seconds
• Clock with weekday
• Calendar
MOON PHASE
The Calendar must be set for this feature to work (see
Clock / Calendar section).
New
Moon Full Moon
Waxing
Crescent
Waning
Gibbous
First
quarter
Third
quarter
Waxing
Gibbous
Waning
Crescent
NOTE The moon phase displays in opposite orientation
if you are in southern hemisphere.
AUTO SCANNING FUNCTION
To activate the outdoor temperature and humidity
auto-scan function:
1. Press SELECT repeatedly to navigate icon to the
Outdoor temperature reading in the or Humidity area.
2. Press and hold MODE to activate auto-scan. The
temperature and humidity display will scroll from
indoor to channel 1 – 3.
3. Press any key to stop the auto-scan.
NOTE Channel 1 is used for the outdoor temperature
and humidity sensor. Use other channels for additional
temperature and humidity sensors.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of weather
forecast within a 30-50 km (19-31 mile) radius.
Weather forecast area
ICON DESCRIPTION
Sunny
Partly cloudy
Cloudy
Rainy
Snowy
TEMPERATURE AND HUMIDITY
The weather station displays indoor and outdoor
readings for:
• Temperature/Relative humidity (current/maximum/
minimum)
• Trend line
• Wind chill/Dew point level/Heat index
The weather station can connect up to 3 remote sensors.
indicates the current sensor viewing.
1. Temperature / relative humidity (current / maximum
/ minimum)
2. Trend line
3. Wind chill (current / minimum) and dew point level
(current / maximum / minimum)
The timestamp records the date and time when storing
the MAX/MIN temperature record and humidity readings
in memory.
To select the temperature measurement unit:
Press UNIT to select °C/ °F.
NOTE The unit of all temperature related displays will
be changed simultaneously.

8
EN
To view current temperature, heat index and MAX/
MIN readings:
1. Press SELECT repeatedly to navigate icon to the
temperature/heat index area.
2. Press UP / DOWN to select the channel in outdoor
temperature area.
3. Press MODE repeatedly to toggle between the
temperature/heat index displays.
4. Press MAX / MIN to toggle between current / MAX /
MIN readings.
To view humidity , MAX/MIN and dew point readings:
1. Press SELECT repeatedly to navigate icon to the
humidity/dew point area.
2. Press UP / DOWN to select the channel in outdoor
humidity area.
3. Press MODE repeatedly to toggle between the
humidity/ dew point displays.
4. Press MAX / MIN to toggle between current/MAX/
MIN readings.
The timestamp is displayed accordingly in the clock area.
To clear the memories and timestamp for the
temperature, humidity, heat index and dew point
readings:
In the temperature or humidity area, press and hold MAX
/ MIN to clear the readings as current data.
NOTE The heat index provides an indication on how hot
it feels based on air temperature and relative humidity.
NOTE The dew point advises at what temperature
condensation will form.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the temperature and
humidity readings. The trend is shown as follows:
RISING STEADY FALLING
WIND CHILL / DIRECTION / SPEED
The base station provides
wind speed and wind direction
information.
To read the wind direction, nd
the compass point the is
pointing to.
The timestamp records the date and time when storing
the wind speed readings.
To select the wind speed unit:
1. Press SELECT repeatedly to navigate icon to the
wind speed/wind direction/wind chill area.
2. Press UNIT to switch between:
• Kilometers per hour (kph)
• Miles per hour (mph)
• Meters per second (m/s)
• Knots (knots)
The wind level is shown by a series of icons:
ICON LEVEL DESCRIPTION
N/A < 0.9 meters/s (<1.5 km/s)
Light 0.9-3.6 meters/s (1.5-2.4 km/s)
Moderate 3.6-11.2 meters/s (2.4-18km/s)
Strong 11.2-24.4 meters/s (18-39.2 km/s)
Storm >24.4 meters/s (>39.2 km/s)
To view the maximum wind speed and minimum wind
chill readings:
1. Press SELECT repeatedly to navigate icon to the
wind speed/wind direction/wind chill area.
2. Press MAX / MIN to toggle between current/MAX
wind speed and current/MIN wind chill readings.
The timestamp of when maximum wind speed or the
minimum wind chill recorded is displayed accordingly.
To clear minimum wind chill reading/maximum wind
speed reading:
1. Press SELECT repeatedly to navigate icon to the
wind speed/wind direction/wind chill area.
2. Press MAX / MIN repeatedly until minimum wind chill
reading or maximum wind speed reading displays.
3. Press and hold MAX / MIN to clear the readings as
current data.
The wind chill factor is based on the combined effects of
temperature and wind speed. Wind chill reading display is
calculated solely from channel 1 sensor.
BAROMETER/UV/RAINFALL
The weather station works with one UV sensor and
one rain gauge. The station is capable of storing and
displaying the hourly history data for the last 10 hours
of UV index, and 24 hours of rainfall and barometric
pressure readings.
BAROMETER UV RAINFALL
The bar chart display shows the current and historical
data for the barometric pressure, UV index and rainfall
readings.