Original BTC Oxford Double FT620 User manual

Oxford Double
Instruction Manual
MADE IN BRITAIN
ORIGINALBTC.COM
[phone]
UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND
Table Light
FT620
Floor Light
FF630
Safety Instructions
Cleaning and Maintenance
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or Injury.
Please retain for future reference. When fitting is in operation, some parts will become hot; take care when
using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to over tighten lamp.
- Do not touch the lamp (bulb) or lamp holder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps carefully.
- Adjust light fitting only when power to the fitting is off and has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of the cable
does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be unplugged from
the power supply immediately and not operated until the damaged parts are fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any liquids.
Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or abrasives. Bone china can be
cleaned by hand, using a soft damp cloth with a diluted mild detergent (nonabrasive) if necessary. Switch off
power to the fitting before cleaning.
Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and
contemporary homes.
All products are hand-assembled in Oxford from high quality components, produced in the UK.
Desk Light
FT625
FT620 / FT625 / FF630
v1.1-10.18

Oxford Double
FT620/BR - Oxford Double Table Light FF630/BR - Oxford Double Floor Light
230V ac 50Hz IP20
Fig 1
A
C
D
B
G
E
F
F
I
H
GU10 PAR16
LAMP GUIDANCE
TYPE* WATTAGE** BASE SHAPE


HALOGEN
LED
n/a
10W
Supplied with 4.6W LED bulb * Use LED lamps only. Warm white (2700k) recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
- With the bulb installed, place the first 47mm washer (F) on top of the shoulders of the
shade bracket (H) . Next, place the cyclindrical shade on top of this washer.
- Place the 2nd large washer (F) on top of the shade hole, and then place the spacer (E)
on top of this, aligning the 3 legs with the legs of the shade bracket underneath (fig 1.)
- Put the small 20mm washer (D) over the threaded tube, onto the spacer.
- Place the conical shade (C) onto this, place the brass disc (B) on top (logo up) and fix
in place with the finial (A). DO NOT OVER TIGHTEN.
Contents
A C
G
H
I
B
D
E
F
Contents
A
B
C
D
E
F
G
H
I
Finial
Disc
Conical shade
20mm Rubber washer
Spacer
47mm washer (x2)
Cylindrical shade
Base
Bulb
Contents
A
B
C
D
E
F
Base
Lampholder
Conical shade
Cylindrical shade
Plastic shade ring
Brass shade ring
B
- Place the large conical shade (C), then the smaller cylindrical shade (D)
over the lampholder (B) and hold in place.
- Next place the plastic shade ring (E) followed by the brass shade ring
(F) over the lampholder. Screw on the brass shade ring until the shades
are secure (make sure the brass shade ring is aligned when threading it
on)
- Gently screw a bulb. The light is now ready to use.
A
C
D
E
F
B
FT625/BR - Oxford Double Desk Light
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
E27 GLS
LAMP GUIDANCE
TYPE* WATTAGE** BASE SHAPE




INCANDESCENT
CFL
ECO-HALOGEN
LED
40W MAX
15W
28W
10W
BALL
Assembly
Contents
Assembly
C
D
E
F
A