ORiNG PCard-E 021-D9 Series User manual

Quick Installation Guide
Version 1.0
Quick Installation Guide
Introduction
PRINTED ON RECYCLED PAPER
Q I G PCard-E 021-D9 Seriesx 1907-2-29-PCAREX021D9-1.0
The 2 Ports PCI Express Cards are designed for POS, ATM and KIOSK
applications. Each card supports 50~921600 baudrate. The PCard-E1021-
S-D9, PCard-E2021-S-D9, PCard-E3021-S-D9 are for 6KV surge protect
models. In addition, the andPCard-E 021-S-D9 PCard-E 021-D9 seriesx x
provide full modem control signals to ensure compatibility with a wide range
of serial peripherals.
Preparation
Before you begin installing the switch, make sure you have all of the package
contents available and a PC with Microsoft Internet Explorer 6.0 or later, for
using web-based system management tools.
Elevated Operating Ambient: If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
Reduced Air Flow: Installation of the equipment in a rack should be such
that the amount of air flow required for safe operation of the equipment is
not compromised.
Mechanical Loading: Mounting of the equipment in the rack should be
such that a hazardous condition is not achieved due to uneven mechanical
loading.
Circuit Overloading: Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits
might have on overcurrent protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when addressing
this concern.
Safety & Warnings
Dimension
Panel Layouts
DB9 Serial Ports
Package Contents
Contents
QIG
PCard-E1021-D9 or
PCard-E2021-D9 or
PCard-E3021-D9 or
PCard-E1021-S-D9 or
PCard-E2021-S-D9 or
PCard-E3021-S-D9
Number
X 1
X 1
Front View
I N D U S T R I A L
P C I
C A R D
Industrial 2-Ports PCI Express Card
The shipped with the following items. If any of these items isdevice is
missing or damaged, please contact your customer service representative
for assistance.
PCard-E 021-D9 Seriesx
Low profile bracket X 1
Cable Order Information (Optional)
Model Name
9_CYASWL0008_XXB0
9_CYASWL0010_XXB0
Pictures Description
DB9 Male to DB9 Female, 150cm
RJ45 Plug to DB9 Male, 150cm
DB9 Serial Port
5 4 3 2 1
9 8 7 6
DB9 Male connector
DIP Switch Definition for RS485
PIN1/PIN2 Pull Hi/Lo
PIN3 Terminator
For PCard-E1021-S-D9 / PCard-E1021-D9
The DB9 connector supports RS232 / RS422 / RS485
operation modes. Please refer to the following table for
the pin assignments of the DB9 connector.
PIN RS232 RS422 4W-RS485 2W-RS485
1 DCD -- -- --
2 RXD -- -- --
3 TXD -- -- --
4 DTR -- -- --
5 GND -- -- --
6 DSR -- -- --
7 RTS -- -- --
8 CTS -- -- --
-- -- -- -- --
For PCard-E2021-S-D9 / PCard-E2021-D9
PIN RS232 RS422 4W-RS485 2W-RS485
1 -- TX- TX- --
2 -- TX+ TX+ --
3 -- RX+ RX+ D+
4 -- RX- RX- D-
5 -- GND GND GND
6 -- -- -- --
7 -- -- -- --
8 -- -- -- --
-- -- -- -- --
DIP Switch Definition for RS485
PIN1/PIN2 Pull Hi/Lo
PIN3 Terminator
For PCard-E3021-S-D9 / PCard-E3021-D9
PIN RS232 RS422 4W-RS485 2W-RS485
1 DCD TX- TX- --
2 RXD TX+ TX+ --
3 TXD RX+ RX+ D+
4 DTR RX- RX- D-
5 GND GND GND GND
6 DSR -- -- --
7 RTS -- -- --
8 CTS -- -- --
-- -- -- -- --
Pictures
9_CYASWL0009_XXB0 Rj45 Plug to DB9 FeMale, 150cm

Q I G Quick Installation Guide
PRINTED ON RECYCLED PAPER
Version 1.0
Quick Installation Guide
Specifications
I N D U S T R I A L
ORing Model PCard-E1021-S-D9/
PCard-E1021-D9
LED Indicator
Power con sumption 630 mA @ 3.3 VDC
Physical Characteristic
Dimen sion 85.0 x 101.9 mm (3 .35x 4.01inch.)
Environmental
-40 to 85 C (-40 to 1 85 F)
o o
Storage Temperature
Operating Temperature
5% to 95% N on-condensingOperat ing Humidity
Warranty
5 years
-40 to 75 C (-40 to 1 67 F)
o o
Conne ctor DB9(male) x2
Serial Port
RS-23 2 TxD, RxD, RTS, CTS, DTR, DSR , DCD, GND
RS-42 2 TX+, TX-, RX+, RX-, GND
Seria l Baud Rate 5 0 bps to 921.6 Kbps
Operation Mode RS-232
RS-48 5(2-w ire) D+, D-, GND
RS-48 5(4-w ire) TX+, TX-, RX+, RX-, GND
Standards and Certification
CISPR 22, FCC Part 15B Class B
EMI
EN61000-4-2 (E SD): Contact: 8 kV ; Air: 15 kV
EN61000-4-3 (R S): 80 MHz to 1 GHz: 3 V/m
EN61000-4-4 (E FT): Powe r: 1 kV; Signal: 0.5 k V
EN61000-4-5 (S urge): Powe r: 2 kV; Signal : 6 KV ( onl y for –S mode l )
EN61000-4-6 (C S): 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
EN61000-4-8 ( )PFMF
EMS
Ports 2
RS-23 2 / RS-422 /
4(2)-Wire RS-485
RS-42 2 /
4(2)-Wire RS-485
Data Bi ts 5, 6, 7, 8
Parity od d, even , none, mark , space
Stop Bi ts 1, 1.5, 2
ORing Industrial Networking Corp.
Copyright© 2017 ORing
All rights reserved.
TEL: [phone]
FAX: [phone]
Website: www.oringnet.com
E-mail: [e-mail]
RS-48 5(4-w ire) TX+, TX-, RX+, RX-, GND
Flow Co ntrol RTS/CTS, Xon/Xoff RTS/CTS, Xon/Xoff
Xon/Xoff
Seria l TX LEDs
Seria l RX LEDs
Green : Serial port is transmitting data (TX)
Amber : Serial port is rece iving data (RX )
Power
EN 55032/24
EMC
P C I
C A R D
Industrial 2-Ports PCI Express Card
PCard-E2021-S-D9/
PCard-E2021-D9
PCard-E3021-S-D9/
PCard-E3021-D9
PCard-E 021-D9 Seriesx
PCard-E 021-D9 Seriesx