ICP DAS USA PCI-2602U User manual

PCI-2602U Quick Start Guide ICP DAS CO., LED
1
WebSite: http://www.icpdas.com E-Mail: [e-mail] , [e-mail]
The package includes the following items:
For PCI-2602U
What’s in the shipping package?
English/ Jul. 2014/ Version 1.0
Software CD
(V6.0 or later)
Quick Start Guide
(This Document)
Front View
1. CON1: Female SCSI II 68-pin.
2. SW1: Card ID function.
3. Universal PCI Bus: Supports both
+5 V and +3.3 V PCI bus.
1
2
3
PCI-2602U

PCI-2602U Quick Start Guide ICP DAS CO., LED
2
WebSite: http://www.icpdas.com E-Mail: [e-mail] , [e-mail]
Step 1: Setup the UniDAQ driver under Windows XP. The driver is located at:
The UniDAQ driver supports 32-/64-bit Windows 2K/XP/2003/Vista/7/8:
CD: \NAPDOS\PCI\UniDAQ\DLL\Driver
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
Step 2: Click the “Next>”button to start the installation.
Step 3: Check your DAQ Card is or not on supported list, then click the
“Next>”button.
Step 4: Select the installed folder, the default path is C:\ICPDAS\UniDAQ ,
confirm and click the “Next>”button.
Step 5: Check your DAQ Card on list, then click the “Next>”button.
Step 6: Click the “Next>”button on the Select Additional Tasks window.
Step 7: Click the “Next>”button on the Download Information window.
Step 8: Select “No, I will restart my computer later”and then click the
“Finish”button.
Step 1: Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI slot.
Step 4: Carefully insert your I/O card into the PCI slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
Installing Windows Driver
Installing Hardware on PC

PCI-2602U Quick Start Guide ICP DAS CO., LED
3
WebSite: http://www.icpdas.com E-Mail: [e-mail] , [e-mail]
Pin Assignments

PCI-2602U Quick Start Guide ICP DAS CO., LED
4
WebSite: http://www.icpdas.com E-Mail: [e-mail] , [e-mail]
Before beginning the “Self-test”, use the advanced configuration tool in the
Windows Device Manager to settings the Analog Input type and Digital I/O
Ports, the detail configuration is illustrated in the figure below.
1. Open the Windows Device
Manager to verify the PCI-2602U
card is listed correctly.
2. Right-click on the name of the
PCI-2602U card.
3. Select the “Properties”item
from the popup menu and the
“[UinDAQ]PCI-2602U Multi-
function board Properties”dialog
box will be displayed.
4. Click the “Advanced”tab to open
the advanced configuration tool.
5. In the Analog Input Type section,
select the “Single Ended” options
for execute a self-test.
6. Click the “Save Setting(S)”
button and “OK”button to
complete the configuration.
Advanced Configuration
1
2
3
5
4
6

PCI-2602U Quick Start Guide ICP DAS CO., LED
5
WebSite: http://www.icpdas.com E-Mail: [e-mail] , [e-mail]
Analog Input/Output Test Wiring:
1. Use DN-68A (optional)
to connect the CON1 on
the PCI-2602U card.
2. Keep set the A/D input type to Single-Ended (page 4), and then connect the
AO0_Out (Pin58) to AI0 (Pin68), and connect the AI_GND (Pin60)to AO_GND
(Pin57).
Self-Test

PCI-2602U Quick Start Guide ICP DAS CO., LED
6
WebSite: http://www.icpdas.com E-Mail: [e-mail] , [e-mail]
Execute the UniDAQ Utility Program.
The UniDAQ Utility will be placed in the All
Programs of Start menu after completing
installation. The detail path is located in: Start
All Programs ICPDAS UniDAQ
Development Kits UniDAQ Utility.
Get A/D and D/A functions test result.
Click “Analog Output” tab.
3
Select the “Port 0”
Select the
“Bipolar +/- 5V”
Type the voltage value
4
5
6
Confirm the PCI-2602U card had
successfully installed to PC. It
start s from 0.
Click this button
to start test.
1
2
Click this button.
7

PCI-2602U Quick Start Guide ICP DAS CO., LED
7
WebSite: http://www.icpdas.com E-Mail: [e-mail] , [e-mail]
PCI-2602U Card Product Page:
http://www.icpdas.com/root/product/solutions/pc_based_io_board/pci/pci-2602u.html
DN-68A page (optional):
http://www.icpdas.com/root/product/solutions/pc_based_io_board/daughter_boards/dn-68a.html
Documentation and Software:
CD:\NAPDOS\PCI\UniDAQ\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/
Related Information
Click this button.
10
PASS
Confirm the configuration setting.
9
Click “Analog Input”tab.
8
Check analog input on Channel 0 textbox.
The other channels value for floating
number.
11