ORION TELESCOPES & BINOCULARS 10110 User manual

OrionTelescopes.com
Customer Support [phone]
E-mail: [e-mail]
Corporate Offices [phone]
89 Hangar Way, Watsonville, CA 95076
Providing Exceptional Consumer Optical Products Since 1975
Orion Dob Pod for Orion 4.5-10"
Dobsonian Telescopes
#10110
The Orion Dob Stand is an invaluable tool for observ-
ers who prefer using the huge light gathering capabil-
ity of a Dobsonian telescope. It adds 1 ft to the telescope
height, making it easier and more comfortable to use a
Dob while standing (for individuals of ‘average’ height).
It is compatible with the Orion’s Classic, IntelliScope and GoTo
Dobsons from 6" to 10" of aperture.
Getting Started
Start by familiarizing yourself with the Dob Stand components.
1. Dob Stand Leg (three pcs)
2. Dob Stand flat surface
3. Assembly Hex Socket Screws (Allen key not shown)
Assembling the Dob Stand
It is very easy to assemble the Dob Stand. Start by locating
the three cut-outs on the Dob Stand flat Surface (#2). Each of
the three Dob Stand Legs (#1) will be fixed bellow as shown
in Figure 2.
IN 499 Rev. A 05/13
INSTRUCTION MANUAL
Figure 1. Parts list
Figure 2. Assembling the three Dob Stand Legs

2
Start by attaching one Dob Stand Leg and fix it first to the Dob
Stand Surface as shown. Use the supplied Allen key and two
Socket Hex Screws (#3). Do not over tighten the two socket hex
screws as it may damage the flat particle board flat surface.
Repeat the same procedure for the two other Dob Stand
Legs. Now that you have assembled the Dob Stand, adjust the
screws, you might need to tighten the screws a little more.
Placing the Telescope on Top of the Dob Stand
The three plastic feet on the bottom of the ground board of
your Orion Dobsonian telescope should fit the three cut-outs
on the Dob Stand Flat Surface. Place the telescope on top of
the Dob Stand in such way that those three feet fit the cut-outs.
You are now ready to use the Dob Stand.
NOTICE: The Dob Stand is meant to carry a telescope. Do
not step on the Dob Stand as it might damage it and can
cause injury.
NOTICE: The Orion Dob Stand is intended for use with
Orion Dobsonian telescopes of 4.5” to 10” diameter, and
may not fit other makes or models.
Orion Telescopes & Binoculars
89 Hangar Way, Watsonville CA 95076
Customer Support Help Line [phone] • Day or Evening
© Copyright 2013 Orion Telescopes & Binoculars
One-Year Limited Warranty
This Orion product is warranted against defects in materials or workmanship for a period of one year
from the date of purchase. This warranty is for the benefit of the original retail purchaser only. During this
warranty period Orion Telescopes & Binoculars will repair or replace, at Orion’s option, any warranted
instrument that proves to be defective, provided it is returned postage paid. Proof of purchase (such as a
copy of the original receipt) is required. This warranty is only valid in the country of purchase.
This warranty does not apply if, in Orion’s judgment, the instrument has been abused, mishandled, or
modified, nor does it apply to normal wear and tear. This warranty gives you specific legal rights. It is not
intended to remove or restrict your other legal rights under applicable local consumer law; your state or
national statutory consumer rights governing the sale of consumer goods remain fully applicable.
For further warranty information, please visit www.OrionTelescopes.com/warranty.