ORTEC MDS-700 User manual

Mini Docking Station
MDS-700
User’s Manual
Version 1.0 2020/08
ID NO: PAKL-H31Y5301-00

About This Manual
This manual is designed to assist you in installing and using the
Mini Docking Station. Information in this document has been
carefully checked for accuracy; however, no guarantee is given to
the correctness of the contents. The information in this document is
subject to change without notice.
Edition
1st Edition,
Copyright
© Copyright 2020
This document contains proprietary information protected by
copyright.All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic or other means, in any
form, without prior written permission of the manufacturer.
Trademarks
All trademarks and registered trademarks are the property of their
respective owners.

FEDERAL COMMUNICATIONS COMMISSION STATEMENT
This Equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into and outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference that may cause undesired operation.

Introduction
Thank you for purchasing the Mini Docking Station. This User’s
Manual contains information that will help to operate the device as
well as answering possible questions. Please keep this manual in a
safe place for future reference.
Specification
Compatible
Systems
Apple MacBook with Type-C ports (2016-Present)
Apple iPad Pro 11”/12.9”
macOS and iPadOS
Windows 10 or later with Type-C ports system
Dimension
137.5x40x12mm
(Block 1: 79.4 *40*12mm / Block 2: 24.7 *40*12mm / Block
3: 36.8*40*12mm)
Weight
85g
I/O Port
HDMI
HDMI Port 2.0 Port: 1080p@60Hz, Up to 4K
@30Hz
Display Port
Display Port 1.2a , 4K@60Hz and ready for DP
1.4 up to 8K@ 60Hz
USB-A
Gen1 5Gbps
USB-C(PDonly)
Power Delivery charging through up to 100W
USB-C
Gen1 5Gbps
LAN
Ethernet LAN RJ45 :1Gb/S
Card Reader
Micro SD and full-size SD card, support SD
UHS-I up to104MB/s
Package
Includes
MDS-700 * 1, Manual*1

Assemble Methods:

How to use:
●For MacBook use (Require single or double Type-C plugs)：
For Double Type-C plugs：
System Requirement
Supporting function
Block 1:
Display Output: HDMI 2.0 port. 1080p@60Hz,
Up to 4K @30Hz
Downstream port compliant with the USB-A
3.1 Gen1 5Gbps
Downstream port compliant with the USB-C
3.1 Gen1 5Gbps
Gigabit Ethernet Port supports 10/100/1000
BASE-T Mbps network connection, ideal for
streaming movies, downloading large files or
playing games
Block 2:
Display Port 1.2a , 4K@60Hz and ready for DP
1.4 up to 8K@ 60Hz
USB-C Power Delivery port supports up to
100W for charging MacBook
Block 3:
Micro SD and SD card reader supports SD 3.0
UHS-I up to 104 MB/s

For Single Type-C plug：
System Requirement
Supporting Function
Block 1:
Display Output: HDMI 2.0 port. 1080p@60Hz,
Up to 4K @30Hz
Downstream port compliant with the USB-A 3.1
Gen1 5Gbps
Downstream port compliant with the USB-C 3.1
Gen1 5Gbps
Gigabit Ethernet Port supports 10/100/1000
BASE-T Mbps network connection, ideal for
streaming movies, downloading large files or
playing games
Block 2:
Display Output: Display Port 1.2a , 4K@60Hz
and ready for DP 1.4 up to 8K@ 60Hz
USB-C Power Delivery port supports up to
100W for charging MacBook
Block 3:
Micro SD and SD card reader supports SD 3.0
UHS-I up to 104 MB/s
Block 1:
HDMI 2.0 port. 1080p@60Hz, Up to 4K @30Hz
USB-A 3.1 Gen1 5Gbps
USB-C 3.1 Gen1 5Gbps
Ethernet Lan, RJ45:1Gb/S
Block 3:
Card Reader, 104 MB/S

●For iPad Pro use (Requires single Type-C plug)：
System Requirement
Supporting Function
Block 1:
Display Output: HDMI 2.0 port. 1080p@60Hz,
Up to 4K @30Hz
Downstream port compliant with the USB-A 3.1
Gen1 5Gbps
Downstream port compliant with the USB-C 3.1
Gen1 5Gbps
Gigabit Ethernet Port supports 10/100/1000
BASE-T Mbps network connection, ideal for
streaming movies, downloading large files or
playing games
Block 2:
Display Output: Display Port 1.2a , 4K@60Hz
and ready for DP 1.4 up to 8K@ 60Hz
USB-C Power Delivery port supports up to
100W for charging iPad Pro
Block 3:
Micro SD and SD card reader supports SD 3.0
UHS-I up to 104 MB/s
Block 1:
HDMI 2.0 port. 1080p@60Hz, Up to 4K @30Hz
USB-A 3.1 Gen1 5Gbps
USB-C 3.1 Gen1 5Gbps
Ethernet Lan, RJ45:1Gb/S
Block 3:
Card Reader, 104 MB/S

●For Windows use (Requires single Type-C plug)：
System Requirement
Supporting Function
Block 1:
Display Output: HDMI 2.0 port. 1080p@60Hz,
Up to 4K @30Hz
Downstream port compliant with the USB-A 3.1
Gen1 5Gbps
Downstream port compliant with the USB-C 3.1
Gen1 5Gbps
Gigabit Ethernet Port supports 10/100/1000
BASE-T Mbps network connection, ideal for
streaming movies, downloading large files or
playing games
Block 2:
Display Output: Display Port 1.2a , 4K@60Hz
and ready for DP 1.4 up to 8K@ 60Hz
Block 3:
Micro SD and SD card reader supports SD 3.0
UHS-I up to 104 MB/s
Block 1:
HDMI 2.0 port. 1080p@60Hz, Up to 4K @30Hz
USB-A 3.1 Gen1 5Gbps
USB-C 3.1 Gen1 5Gbps
Ethernet Lan, RJ45:1Gb/S
Block 3:
Card Reader, 104 MB/S